Datalogic Memor X3 Manuel utilisateur

Datalogic ADC, S.r.l.

Via S. Vitalino, 13

40012 Lippo di Calderara di Reno

Bologna - Italy

Telephone: (+39) 051-3147011

Fax: (+39) 051-3147205

documentation or the procedures described therein may be reproduced or

transmitted in any form or by any means without prior written permission of

Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic

ADC”). Owners of Datalogic products are hereby granted a non-exclusive,

revocable license to reproduce and transmit this documentation for the

purchaser's own internal business purposes. Purchaser shall not remove or

alter any proprietary notices, including copyright notices, contained in this

documentation and shall ensure that all notices appear on any reproductions

of the documentation. Should future revisions of this manual be published,

you can acquire printed versions by contacting your Datalogic representative.

Electronic versions may either be downloadable from the Datalogic website

(www.datalogic.com) or provided on appropriate media. If you visit our

website and would like to make comments or suggestions about this or

other Datalogic publications, please let us know via the "Contact Datalogic"

page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this

manual that is complete and accurate, however, Datalogic reserves the right

to change any specification at any time without prior notice. Datalogic and

the Datalogic logo are registered trademarks of Datalogic S.p.A. in many

countries, including the U.S.A. and the E.U.

Memor and the Memor logo are trademarks of Datalogic ADC S.r.l.

All other brand and product names may be trademarks of their respective

owners.

Patents

This product is covered by one or more of the following patents.

Design patents: AU310182, EP0469143, EP1582024, EP2247700,

HK0601962.6, JP1325117, KR30/0466667, TWD118829, USD574830,

USD643034, USD658174, ZL200630124857.0

Utility patents: EP0681257B1, EP0789315B1, EP1128315B1, EP1396811B1,

EP1413971B1, US5992740, US6808114, US6997385, US7387246.

iii

CONTENTS

1BATTERIES AND MAINTENANCE................................................... 1

1.1 Charging the Battery Pack ................................................................ 1

1.2 Replacing the Battery Pack............................................................... 4

1.3 Cleaning the Mobile Computer.......................................................... 7

2WIRELESS AND RADIO FREQUENCIES WARNINGS ................... 8

3REGULATORY INFORMATION...................................................... 10

3.1 General Safety Rules...................................................................... 10

3.2 Power Supply.................................................................................. 10

3.3 Laser Safety.................................................................................... 11

3.4 LED Class....................................................................................... 17

3.5 Radio Compliance........................................................................... 17

3.5.1 Europe – EU Declaration of Conformity........................................... 17

3.5.2 Information for the User .................................................................. 20

3.6 FCC Compliance............................................................................. 21

3.7 Industry Canada Compliance.......................................................... 23

3.8 SAR Compliance............................................................................. 24

3.9 WEEE Compliance ......................................................................... 25

This page intentionally left

blank

BATTERIES AND MAINTENANCE

1 BATTERIES AND MAINTENANCE

Rechargeable backup batteries and battery packs are not

initially fully charged. Therefore the initial operation to

perform is to charge them. See below.

NOTE

By default, the main battery pack is disconnected at the

factory to avoid damage due to excessive draining.

NOTE

Annual replacement of rechargeable battery pack avoids

possible risks or abnormalities and ensures maximum

performance.

CAUTION

1.1 CHARGING THE BATTERY PACK

The battery pack autonomy varies according to many factors,

such as the frequency of barcode scanning, RF usage, battery

life, storage, environmental conditions, etc.

NOTE

The battery icon on the Taskbar indicates when the battery pack is low.

It is possible to recharge the battery pack by connecting the power supply

directly to the Memor X3.

Alternatively, it is also possible to recharge the battery pack by inserting the

Memor X3 into the single slot dock or the multi battery charger.

Moreover recharging is possible by USB Direct connection with the host

computer, but with longer charging times and only if the mobile computer off.

During the charging process the LED positioned at the right side of the display

is red constant. Once the charging process has been completed this LED is

green constant.

The stand alone battery pack may be recharged outside a Memor X3 using the

spare battery charging slot on the back of the single slot dock or the multi

battery charger.

MEMOR™ X3 REGULATORY AND SAFETY

Do not use the Memor X3 until batteries are charged for

minimum 4 hours.

CAUTION

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

CAUTION

Il y a risque d’explosion si la batterie est remplacée par une

batterie de type incorrect.

Mettre au rebut les batteris usagées confor mément aux

instructions.

CAUTION

Avoid storing batteries for long periods in a state of full

charge or very low charge.

We recommend charging the battery pack every two to three

months to keep its charge at a moderate level to maximize

battery life.

CAUTION

Even if the storage temperature range is wider, In order to

achieve the longest battery life, store the terminal and the

spare batteries between 20 to 30 ºC (68 to 86 ºF).

Memor X3 (including spare battery) should be charged at an

ambient temperature between 0° to +40 °C (+32° to +104 °F)

to achieve the maximum charging rate. Never charge the

main device or spare batteries in a closed space where

excessive heat can build up.

NOTE

The battery level may display incorrectly for several minutes

after the Memor X3 is disconnected from its charger if the

charging cycle is not completed.

NOTE

BATTERIES AND MAINTENANCE

The Memor X3 may get warm during charging; this is normal

and does not mean a malfunction.

NOTE

Use only a USB-IF compliant USB port as a charging source.

NOTE

MEMOR™ X3 REGULATORY AND SAFETY

1.2 REPLACING THE BATTERY PACK

To correctly replace the battery pack, proceed as follows.

1. Turn off the Memor X3 .

2. Press the latch release button and pull the latch down; then remove the

battery cover:

3. Install the new battery pack, first insert the upper side (contacts), then the

bottom side of the battery pack into the slot:

4. Reinsert the cover. First insert first the upper side and then press the latch

release button and pull the latch down to insert the bottom. Push the

knurled section of the latch upward to close the cover:

BATTERIES AND MAINTENANCE

WARNING

Installing, charging and/or any other action should be done

by authorized personnel and following this manual.

The battery pack may get hot, explode, ignite, and/or cause

serious injury if exposed to abusive conditions.

If the battery pack is replaced with an improper type, there is

risk of explosion.

Do not place the battery pack in or near a fire or other heat

source; do not place the battery pack in direct sunlight, or

use or store the battery pack inside unventilated areas in hot

weather; do not place the battery pack in microwave ovens,

in clothes dryers, in high pressure containers, on induction

cook surfaces or similar devices. Doing so may cause the

battery pack to generate heat, explode or ignite. Using the

battery pack in this manner may also result in a loss of

performance and a shortened life expectancy.

Use only a Datalogic approved power supply. The use of an

alternative power supply will void the product warranty, may

cause product damage and may cause heat, an explosion,

or fire.

The area in which the units are charged should be clear of

debris and combustible materials or chemicals.

Do not use the battery pack of this terminal to power devices

other than this mobile computer.

Immediately discontinue use of the battery pack if, while

using, charging or storing the battery pack, the battery pack

emits an unusual smell, feels hot, changes colour or shape,

or appears abnormal in any other way.

Do not short-circuit the battery pack contacts connecting the

positive terminal and negative terminal. This might happen,

for example, when you carry a spare battery pack in your

pocket or purse; accidental short–circuiting can occur when

a metallic object such as a coin, clip, or pen causes direct

connection of the contacts of the battery pack (these look

like metal strips on the battery pack). Short–circuiting the

terminals may damage the battery pack or the connecting

object.

Do not apply voltages to the battery pack contacts.

Do not pierce the battery pack with nails, strike it with a

hammer, step on it or otherwise subject it to strong impacts,

pressures, or shocks.

MEMOR™ X3 REGULATORY AND SAFETY

WARNING

Do not disassemble or modify (i.e. bend, crush or deform)

the battery pack. The battery pack contains safety and

protection devices, which, if damaged, may cause the

battery pack to generate heat, explode or ignite.

In case of leakage of liquid from the battery, avoid contact

with liquid the skin or eyes. If the contact occurs,

immediately wash the affected area with water and consult

a doctor.

Do not solder directly onto the battery pack.

Do not expose the battery pack to liquids.

Avoid any knocks or excessive vibrations. If the device or

the battery is dropped, especially on a hard surface, you

should take it to the nearest Authorised Repair Centre for

inspection before continuing to use it.

Do not replace the battery pack when the device is turned

on.

Do not remove or damage the battery pack’s label.

Do not use the battery pack if it is damaged in any part.

Battery pack usage by children should be supervised.

Collect and recycle waste batteries separately from the

device in compliance with European Directive 2006/66/EC,

2011/65, 2002/96/EC and subsequent modifications, with

US and China regulatory laws and regulations about the

environment.

In order to maximize operating autonomy, the Memor X3

checks its battery level at all times. If the battery is not

sufficiently charged, the Memor X3 will not turn on when

the ON/OFF Power button is pressed.

In this case, either substitute a sufficiently charged battery,

insert the Memor X3 into a powered cradle, or plug it into a

wall charger.

NOTE

To maximize battery life, turn off radios when they are not

needed.

NOTE

BATTERIES AND MAINTENANCE

1.3 CLEANING THE MOBILE COMPUTER

Periodically clean the Memor X3 with a slightly dampened cloth.

Do not use alcohol, corrosive products or solvents.

Autres manuels pour Memor X3

Table des matières

Langues :

Autres manuels Datalogic PDA

Datalogic

Datalogic Memor 10 Manuel du propriétaire

Datalogic

Datalogic Memor 11 Manuel utilisateur

Datalogic

Datalogic Memor X3 Healthcare Manuel utilisateur

Datalogic

Datalogic Memor X3 Manuel utilisateur

Datalogic

Datalogic WEC7 OS Manuel utilisateur

Datalogic

Datalogic Memor Manuel utilisateur

Datalogic

Datalogic Skorpio X4 Manuel utilisateur

Datalogic

Datalogic Lynx D Manuel utilisateur

Datalogic

Datalogic MEMOR 20 Manuel utilisateur

Datalogic

Datalogic Lynx 00N0LD-1N0-MEN0 Manuel utilisateur

Datalogic

Datalogic Pegaso Manuel d'installation et d'exploitation

Datalogic

Datalogic Industrial PDA Manuel utilisateur

Datalogic

Datalogic J Series Manuel utilisateur

Datalogic

Datalogic Jet Manuel utilisateur

Datalogic

Datalogic Skorpio X5 Manuel utilisateur

Datalogic

Datalogic ELF Manuel utilisateur

Datalogic

Datalogic DL-Axist Manuel utilisateur

Datalogic

Datalogic Pegaso Falcon Manuel utilisateur

Datalogic

Datalogic J Series Manuel utilisateur

Datalogic

Datalogic Falcon 5500 Instructions d'installation et d'utilisation

Datalogic

Datalogic ELF Manuel utilisateur

$Datalogic Kyman\ Manuel utilisateur$

Datalogic

Datalogic Kyman\ Manuel utilisateur

Datalogic

Datalogic ELF Manuel utilisateur

Datalogic

Datalogic Falcon X4 Manuel utilisateur

Manuels PDA populaires d'autres marques

SPOT

SPOT SPOT Manuel utilisateur

Palm

Palm handheld Manuel utilisateur

Winmate

Winmate E500QK Manuel utilisateur

Getac

Getac PS236 Manuel utilisateur

Sharp

Sharp CE-1600P Manuel utilisateur

HTC

HTC PHAR100 Manuel utilisateur

Mindeo

Mindeo M40 Manuel utilisateur

Acer

Acer n30 Manuel utilisateur

ASCOM

ASCOM 9D24 EX Manuel utilisateur

Unitech

Unitech PA520BTNF Manuel utilisateur

HandHeld

HandHeld Nautiz X3 Manuel utilisateur

Casio

Casio PALM Manuel utilisateur

Sharp

Sharp TM-20 Guide de démarrage rapide

Atid

Atid AT870 Manuel utilisateur

AML

AML M7225 Manuel utilisateur

Audiovox

Audiovox Maestro Manuel technique

Casio

Casio PV-750 Plus Manuel d'instructions et de sécurité

Unitech

Unitech PT630 Manuel utilisateur