Datalogic Gryphon-HC Series Manuel utilisateur

Gryphon-HC Handheld Products Cleaning Procedure

Applicable to Gryphon I GD4XXX-HC, GM4XXX-HC, 

GBT4XXX-HC Healthcare Models



Corded Models

Exterior surfaces and scan windows exposed to spills, smudges or

debris accumulation require periodic cleaning to ensure best per-

formance during scanning operations.

Use a soft, lint-free cloth or lens tissue to clean the product.

Dampen it with an approved cleaning agent. Gently wipe all sur-

faces.

Use approved cleaning agents only (see Table 1 below).

Item Description Item Description

Sani-Cloth® HB, Sani-Cloth® Plus,

Super SaniCloth®

Quaternary Ammonium Chloride

solution Virex® 256

n-Alkyl Dimethyl Benzyl



Ammonium Chloride; Didecyl

Dimethyl Ammonium Chloride

Hepacide Quat Il Virucidal disinfectant cleaner 409® Glass and Surface Cleaner Isopropanol (Isopropyl Alcohol),



2 propanol, dimetil carbinol

Alcohol Wipes 70% Isopropyl Alcohol Windex® Blue Isopropyl Alcohol

CaviWipes™ Isopropanol 10-20%; Ethylene Glycol

Monobutyl Ether 1-5% Clorox® Bleach Sodium Hypochlorite;



Sodium Hydroxide

100% Gentle dish soap and water

*When using Ammonia Chloride Solutions be sure to remove residue from the contacts after cleaning.

Do not use abrasive or aggressive cleansing agents or

abrasive pads to clean scan windows, contacts, or

plastics.

Do not spray or pour liquids directly onto the unit.

Table 1. Tested Cleaning Agents

CAUTION

INSTRUCTIONS

BSR idware GmbH

Jakob-Haringer-Str.3

A-5020 Salzburg

Web: www.bsr.at

Gryphon-HC Handheld Products Cleaning Procedure Page 2

Cordless Models

Exterior surfaces and scan windows exposed to spills, smudges or

debris accumulation require periodic cleaning to ensure best perfor-

mance during scanning operations. Contacts on the scanner and the

base should also be cleaned as needed to ensure a good connection.

See below for specific information on how to clean the metal con-

tacts.

Use a soft, lint-free cloth or lens tissue to clean the product. Dampen

it with an approved cleaning agent. Gently wipe all surfaces. A cotton

swab may be used only on hard-to-reach handheld contacts.

Use approved cleaning agents only (see Table 1).

Handheld Contacts

1. Moisten a soft dry cloth with an approved cleaning agent (see Table 1).

2. Rub the cloth back and forth across the contacts. Use care not to leave any cloth

residue.

3. Use the cloth to remove any dirt near the contacts area.

4. Repeat steps 1-3 using a clean dry cloth.

5. Finish by using another clean dry cloth to remove any residue of the cleaning

agent from the contacts.

Cradle Contacts

CAUTION

Do not use abrasive or aggressive cleansing agents or

abrasive pads to clean scan windows, contacts, or

plastics.

Do not spray or pour liquids directly onto the unit.

850006914 (Rev A) October 2013

1. Remove the power cable before cleaning the contacts.

2. Moisten a soft dry cloth with an approved cleaning agent (see Table 1).

3. Rub the cloth from one side of the contacts to the other, moving it slowly back

and forth. Use care not to leave any cloth residue.

4. Use the cloth to remove any dirt near the contacts area.

5. Repeat steps 2, 3 and 4 using a clean dry cloth.

6. Finish by using another clean dry cloth to remove any residue of the cleaning

agent from the contacts.

logic logo are registered trademarks of Datalogic S.p.A. in many coun-

tries, including the U.S.A. and the E.U.

www.datalogic.com

Ce manuel convient aux modèles suivants

Autres manuels Datalogic Lecteur de codes-barres

Datalogic

Datalogic Gryphon I GD4100 Manuel utilisateur

Datalogic

Datalogic Matrix 300N Manuel utilisateur

Datalogic

Datalogic DS6500 Series Manuel

Datalogic

Datalogic DS8100A-3002 Manuel utilisateur

Datalogic

Datalogic Matrix 300 Manuel utilisateur

Datalogic

Datalogic Gryphon I GD4100 Manuel utilisateur

Datalogic

Datalogic PowerScan PD9530 Manuel d'installation et d'exploitation

Datalogic

Datalogic GRYPHON BT Manuel utilisateur

Datalogic

Datalogic Gryphon D100 Manuel utilisateur

Datalogic

Datalogic PowerScan PM9500 Manuel utilisateur

Datalogic

Datalogic Gryphon I GM4100-BK Manuel utilisateur

Datalogic

Datalogic QuickScan Lite QW2470-BKK3S Manuel utilisateur

Datalogic

Datalogic Gryphon I GD4100 Manuel d'installation et d'exploitation

Datalogic

Datalogic Magellan 9800i Manuel d'installation et d'exploitation

Datalogic

Datalogic Gryphon I GD4132 Manuel utilisateur

Datalogic

Datalogic PowerScan PM9501 Manuel utilisateur

Datalogic

Datalogic Gryphon I GBT4400 Manuel utilisateur

Datalogic

Datalogic DSE0420 Guide de configuration rapide

Datalogic

Datalogic DX8200 Manuel utilisateur

Datalogic

Datalogic Heron D150 Manuel utilisateur

Datalogic

Datalogic DS6300 Manuel utilisateur

Datalogic

Datalogic DS8100 Manuel utilisateur

Datalogic

Datalogic QUICKSCAN 6000 PLUS Mode d'emploi

Datalogic

Datalogic Magellan 2200VS Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur

Atid

Atid AT188N Plus Manuel utilisateur