Datalogic Multi Purpose Holder Manuel utilisateur

Multi Purpose Holder Mounting Instructions

Use these instructions to install the Multi Purpose Holder. Options for mounting include:

• Double-sided adhesive tape (horizontal surfaces only)

• Screws (secure to sheet metal and/or wood surfaces)

Installation Using Double-Sided Adhesive Tape

1. Clean the tape application area on the holder shown in Figure 1a using a lint-free towel or cloth

moistened with alcohol. Clean the area where the holder is to be installed in the same manner. Let all

cleaned areas dry completely before proceeding.

2. Individually peel each of the two pieces of double-sided tape from the backing and adhere them to the

cleaned areas in the locations and orientation shown in Figure 1b. Press firmly and smooth evenly for

several seconds to ensure all surfaces make good contact.

Figure 1. Applying the Double-Sided Tape

3. Remove the remaining masking from the installed pieces of double-sided tape and align the holder

above the desired installed position (for reference, the front of the holder is marked on both the tem-

plate and on the holder itself).

4. Adhere the holder by pressing down firmly (20 lbs of force is recommended) for several seconds. For

best tape adhesion, do not use the holder or apply any sideways force to it for at least 12 hours.

CAUTION

Double-sided tape should not be used to mount the Holder on vertical or highly

inclined surfaces. Use for mounting on horizontal surfaces only.

Clean these surfaces

for tape application.

Double-sided

tape

Masking

BSR idware GmbH

Jakob-Haringer-Str.3

A-5020 Salzburg

Web: www.bsr.at

Installation Using Screws

1. Use the template provided in Figure 2 to mark the surface for drilling. For reference, the front/top of

the holder is marked on both the template and on the holder itself.

2. Drill both holes using a 0.136” (#29) drill bit. Drill at least 5/8” deep if drilling into solid material.

3. Secure the holder to the surface using the provided screws, being careful to not overtighten them.

Figure 2. Drilling Template

CAUTION

Use the supplied screws only when mounting to sheet metal and/or wood.

Table des matières

Autres manuels Datalogic Accessoires

Datalogic

Datalogic S70 Manuel utilisateur

Datalogic

Datalogic IO-Link S8 Manuel utilisateur

Datalogic

Datalogic S8-MR M Series Manuel utilisateur

Datalogic

Datalogic DataVS1 Manuel utilisateur

Datalogic

Datalogic PowerScan BC9600 Series Manuel utilisateur

Datalogic

Datalogic Smart-VS WebApp Manuel utilisateur

Datalogic

Datalogic IO-Link TL46 Manuel utilisateur

Datalogic

Datalogic S62 Series Manuel utilisateur

Datalogic

Datalogic S5N-PL Series Manuel utilisateur

Datalogic

Datalogic BC9XX0-BT Manuel utilisateur

Datalogic

Datalogic IO-Link S100 Series Manuel utilisateur

Datalogic

Datalogic C-BOX 200 Manuel utilisateur

Datalogic

Datalogic S45-T53 Series Manuel utilisateur

Datalogic

Datalogic S80-MH-5-YL09 Manuel utilisateur

Datalogic

Datalogic S5N-PA W Series Manuel utilisateur

Datalogic

Datalogic BASIC HOLDER Manuel technique

Datalogic

Datalogic STARGATE RF910MHz Guide de démarrage rapide

Datalogic

Datalogic S51-PA Series Manuel utilisateur

Datalogic

Datalogic S100W Manuel utilisateur

Datalogic

Datalogic S5N-PA Manuel utilisateur

Datalogic

Datalogic C-BOX 300 Manuel utilisateur

Datalogic

Datalogic VS-CRX Manuel d'installation et d'exploitation

Datalogic

Datalogic SG4 Extended Manuel utilisateur

Datalogic

Datalogic S8-PR M53 Series Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur