Data Modul PCM-9375 Manuel utilisateur

User Manual

3&0

6%&Z$0'/;9*$

/&'/$186%DQG66'

QG Ed - 6HSWHPEHU 20

Version: January 2013

PCM-9375 User Manual ii

nal manufacturer reserves the right to make improvements to the products

described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmit-

ted in any form or by any means without the prior written permission of

the original manufacturer. Information provided in this manual is

intended to be accurate and reliable. However, the original manufacturer

assumes no responsibility for its use, nor for any infringements upon the

rights of third parties that may result from such use.

Acknowledgement

Award is a trademark of Award Software International, Inc.

VIA is a trademark of VIA Technologies, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel, Pentium, Celeron, and MMX are registered trademarks of Intel Cor-

poration.

Microsoft Windows®is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

ESS is a trademark of ESS Technology, Inc.

UMC is a trademark of United Microelectronics Corporation.

SMI is a trademark of Silicon Motion, Inc.

Creative is a trademark of Creative Technology LTD.

All other product names or trademarks are properties of their respective

owners.

For more information on this and other Advantech products, please visit

our websites at: http://www.advantech.com

http://www.advantech.com/eplatform

For technical support and service, please visit our support website at:

http://www.advantech.com/support

This manual is for the PCM-9375.

Part No. 2006937511 2nd Edition

Printed in Taiwan Sep. 2007

Data Modul AG - www.data-modul.com

iii

Packing List

Before you begin installing your card, please make sure that the following

materials have been shipped:

• 1 PCM-9375 SBC

• 1 Startup manual

• 1 Utility CD

• 1 mini jumper pack p/n: 9689000002

• 1 Audio cable p/n: 1700160160

• 1 IDE 44 pin cable p/n: 1701440351

• 1 USB 2 port Cable p/n: 1703100121

• 1 Parallel port cable p/n: 1700001977

• 1 Keyboard/Mouse cable p/n: 1700060202

• 1 x COM2/3/4 cable p/n: 1700001971

• 1 x LAN cable p/n: 1701100202

• Optional Accessories

- 1700002150 COM2 cable for RS-422/485

- 1703200201 ATX Power control cable

• Floppy Disk module

- 9696937580E PCM-9375 FDD module

- 1701340700 Flat cable 34-pin for FDD

- 170000212 2x LPT cable

If any of these items are missing or damaged, contact your distributor or

sales representative immediately.

Model No. List Description

PCM-9375E-J0A1E 3.5" SBC w/AMD LX800, VGA, LVDS,

LAN, USB

PCM-9375F-J0A1E 3.5" SBC w/AMD LX800, VGA, TTL,

LAN, USB

Data Modul AG - www.data-modul.com

PCM-9375 User Manual iv

Additional Information and Assistance

1.Visit the Advantech web site at www.advantech.com where you can

find the latest information about the product.

2.Contact your distributor, sales representative, or Advantech's customer

service center for technical support if you need additional assistance.

Please have the following information ready before you call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version, application

software, etc.)

• A complete description of the problem

• The exact wording of any error messages

Data Modul AG - www.data-modul.com

Caution!

Achtung!

This device complies with the requirements in part

15 of the FCC rules: Operation is subject to the fol-

lowing two conditions:

1.This device may not cause harmful interference,

and

2.This device must accept any interference

received, including interference that may cause

undesired operation

This equipment has been tested and found to com-

ply with the limits for a Class A digital device, pursu-

ant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference when the equipment is oper-

ated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance

with the instruction manual, may cause harmful

interference to radio communications. Operation of

this device in a residential area is likely to cause

harmful interference in which case the user will be

required to correct the interference at his/her own

expense. The user is advised that any equipment

changes or modifications not expressly approved

by the party responsible for compliance would void

the compliance to FCC regulations and therefore,

the user's authority to operate the equipment.

There is a danger of a new battery exploding if it is

incorrectly installed. Do not attempt to recharge,

force open, or heat the battery. Replace the battery

only with the same or equivalent type recom-

mended by the manufacturer. Discard used batter-

ies according to the manufacturer’s instructions

Data Modul AG - www.data-modul.com

PCM-9375 User Manual vi

Data Modul AG - www.data-modul.com

vii

Contents

Chapter 1 Introduction ......................................................2

1.1 Introduction ....................................................................... 2

1.2 Features ............................................................................. 2

1.3 Specifications .................................................................... 3

1.3.1 Standard 3.5" Biscuit SBC Functions............................. 3

1.3.2 VGA/LVDS Interface ..................................................... 3

1.3.3 Ethernet Interface............................................................ 4

1.3.4 Audio Function ............................................................... 4

1.3.5 OS support ...................................................................... 4

1.3.6 Mechanical and Environmental ...................................... 4

1.4 Board layout: dimensions.................................................. 5

Figure 1.1:Dimension of PCM-9375F ............................ 5

Figure 1.2:Dimension of PCM-9375E............................ 5

Figure 1.3:Dimension of PCM-9375 for H..................... 6

Figure 1.4:PCM-9375 Mechanical Drawing(Solder side)

Chapter 2 Installation ........................................................8

2.1 Jumpers.............................................................................. 8

Table 2.1:Jumpers........................................................... 8

2.1.1 AT/ATX Selector(J1) .................................................... 8

Table 2.2: AT/ATX Selector(J1) .................................... 8

2.1.2 Clear CMOS(J2)....................................................... 8

Table 2.3: Clear CMOS(J2) ............................................ 8

2.1.3 COM2 Setting (J3) ................................................... 8

Table 2.4: COM2 Setting (J3)......................................... 8

2.1.4 Audio Power (J4) ............................................................ 9

Table 2.5: Audio Power (J4)........................................... 9

2.1.5 TV enable (J5) ................................................................ 9

Table 2.6:TV enable ....................................................... 9

2.2 Connectors....................................................................... 10

Table 2.7:Connectors .................................................... 10

2.3 Locating Connectors ........................................................... 11

Figure 2.1:Connectors (component side)...................... 11

Figure 2.2:Connectors (solder side).............................. 11

2.4 Setting Jumpers ............................................................... 12

2.5 Installing SO-DIMM ....................................................... 13

2.6 IDE, CDROM hard drive connector (CN11) .................. 14

2.6.1 Connecting the hard drive............................................. 14

2.7 Solid State Disk............................................................... 14

2.7.1 CompactFlash (CN10) .................................................. 14

Data Modul AG - www.data-modul.com

PCM-9375 User Manual viii

2.8 Parallel port connector (CN17) ....................................... 14

2.9 Keyboard and PS/2 mouse connector (CN14) ................ 15

2.10 Power & HDD LED Connector (LED1, CN3) ............... 15

2.10.1 Power & HDD LED Connector(LED1)........................ 15

2.10.2 Power Reset button (CN3)............................................ 15

2.11 Power connectors (CN2) ................................................. 15

2.11.1 Main power connector, +5 V, +12 V (CN2)................. 15

2.11.2 ATX Feature connector (CN1, CN8)............................ 15

2.12 Audio interfaces (CN22) ................................................. 16

2.12.1 Audio connector (CN22) .............................................. 16

2.13 COM port connector (CN16,CN19)................................ 16

2.13.1 Serial Port RS-422/485 (CN18, J3) .............................. 16

Table 2.8:Serial Port RS-422/485 (J3).......................... 16

2.14 VGA/LCD/LVDS interface connections ........................ 17

2.14.1 CRT display connector (CN12) .................................... 17

2.14.2 TTL TFT LCD connector (CN4).................................. 17

2.14.3 LVDS LCD panel connector (CN4) ............................. 17

2.15 Ethernet configuration..................................................... 17

2.15.1 100Base-T connector (CN23, CN24) ........................... 17

2.15.2 Network boot (Depends on Ethernet Controller).......... 17

2.16 Watchdog timer configuration ........................................ 17

2.17 USB connectors (CN13,CN15) ....................................... 18

2.18 GPIO (General Purpose Input Output) (CN9)................. 18

Chapter 3 BIOS Operation..............................................20

3.1 BIOS Introduction ........................................................... 20

3.2 BIOS Setup...................................................................... 20

Table 3.1:Controll Keys................................................ 20

3.2.1 Main Menu.................................................................... 21

3.2.2 Standard CMOS Features ............................................. 23

3.2.3 Advanced BIOS Features.............................................. 25

3.2.4 Advanced Chipset Features .......................................... 28

3.2.5 Integrated Peripherals ................................................... 30

3.2.6 Power Management Setup ............................................ 33

3.2.7 PnP/PCI Configurations................................................ 35

3.2.8 PC Health Status ........................................................... 36

3.2.9 Load Optimized Defaults.............................................. 37

3.2.10 Set Password ................................................................. 38

3.2.11 Save & Exit Setup......................................................... 40

3.2.12 Quit Without Saving ..................................................... 41

Chapter 4 PCI SVGA/LCD Setup ..................................44

4.1 Introduction ..................................................................... 44

4.1.1 Display type ................................................................. 44

4.1.2 Dual Simultaneous Display ......................................... 44

Data Modul AG - www.data-modul.com

4.1.3 CMOS setting for panel type ....................................... 44

4.2 Connections to Two Standard LCDs............................... 45

4.2.1 AMD Geode LX ........................................................... 45

Table 4.1:Connections to Sharp LQ121S1DG31 / PCM-

937545

4.3 Installation of the VGA and AES Driver ........................ 47

4.3.1 Installation chipset AES driver ..................................... 47

4.3.2 Installation of VGA driver............................................ 51

4.3.3 PCI Bridge .................................................................... 55

4.4 Further Information ......................................................... 57

Chapter 5 Audio Setup.....................................................60

5.1 Introduction ..................................................................... 60

5.2 Driver installation............................................................ 60

5.2.1 Before you begin........................................................... 60

5.2.2 Windows XP drivers..................................................... 61

Appendix A Pin Assignments ............................................66

A.1 Stand-by Power Input (CN1)........................................... 66

Table A.1:Stand-by Power Input (CN1) ....................... 66

A.2 Power Input (CN2) .......................................................... 66

Table A.2:Power Input (CN2) ...................................... 66

A.3 Reset Button (CN3)......................................................... 67

Table A.3:Reset Button (CN3) ..................................... 67

A.4 TFT LCD (CN4).............................................................. 67

Table A.4:TFT LCD (CN4) (PCM-9375F) .................. 67

Table A.5:TFT 18-Bit/24-Bit Panel Output Mapping Ta-

ble (PCM-9375F)69

Table A.6:PCM-9375E-J0A1E pin assignment............ 70

A.5 Inverter Power (CN5) ................................................ 71

Table A.7:Inverter Power (CN5) .................................. 71

A.6 ATX Power Button (CN8) ............................................ 72

Table A.8:ATX Power Button (CN8)........................... 72

A.7 GPIO (CN9) .......................................................... 72

Table A.9:GPIO (CN9)................................................. 72

A.8 CF (CN10) ............................................................... 73

Table A.10:CF (CN10) ................................................. 73

A.9 IDE (CN11) .................................................... 75

Table A.11:IDE (CN11) ............................................... 75

A.10 CRT (CN12).................................................................... 77

Table A.12:CRT (CN12) .............................................. 77

A.11 USB1/2 (CN13), USB3/4 (CN15)................................... 78

Table A.13:USB1/2 (CN13), USB3/4 (CN15) ............. 78

A.12 COM2/3/4 (CN16) ......................................................... 79

Table A.14:COM2/3/4 (CN16)..................................... 79

Data Modul AG - www.data-modul.com

PCM-9375 User Manual x

A.13 Print Port (CN17)...................................................... 81

Table A.15:Print Port (CN17)....................................... 81

A.14 RS-422/485 (CN18) .................................................. 83

Table A.16:RS-422/485 (CN18)................................... 83

A.15 COM1 (CN19).......................................................... 83

Table A.17:COM1 (CN19) ........................................... 83

A.16 ISA -5 V & -12 V Input (CN21) ................................. 84

Table A.18:ISA -5 V & -12 V Input (CN21)................ 84

A.17 Audio (CN22)........................................................... 85

Table A.19:Audio (CN22) ............................................ 85

A.18 LAN1 (CN23)........................................................... 86

Table A.20:LAN1 (CN23)............................................ 86

A.19 LAN2 (CN24)........................................................... 87

Table A.21:LAN2 (CN24)............................................ 87

Appendix B System Assignments ......................................90

B.1 System I/O Ports.............................................................. 90

Table B.1:System I/O ports .......................................... 90

B.2 1st MB memory map....................................................... 91

Table B.2:1st MB memory map ................................... 91

B.3 DMA channel assignments.............................................. 91

Table B.3:DMA channel assignments .......................... 91

B.4 Interrupt assignments ...................................................... 92

Table B.4:Interrupt assignments ................................... 92

Appendix C Mechanical Drawings.....................................94

C.1 Mechanical Drawings...................................................... 94

Figure C.1:Dimension of PCM-9375F (TTL) .............. 94

Figure C.2:Dimension of PCM-9375E (LVDS) ........... 95

Figure C.3:Dimension of PCM-9375 for H.................. 95

Figure C.4:PCM-9375 Mechanical Drawing(Solder side)

Appendix D Watchdog Timer.............................................98

Data Modul AG - www.data-modul.com

Table des matières

Autres manuels Data Modul Ordinateur monocarte

Data Modul

Data Modul eDM-SBC-iMX8Mm Manuel utilisateur

Manuels Ordinateur monocarte populaires d'autres marques

WIN Enterprises

WIN Enterprises PL-80910 Manuel utilisateur

AXIOMTEK

AXIOMTEK SBC81206 Series Manuel utilisateur

Embest

Embest SOM-PH8800 Manuel utilisateur

SeaLevel

SeaLevel SBC-R9 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuel utilisateur

WinSystems

WinSystems PPM-LX800-G Manuel utilisateur

GIGAIPC

GIGAIPC QBiX-PPC Series Manuel utilisateur

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuel utilisateur

Commell

Commell FS-978 Manuel utilisateur

GIGAIPC

GIGAIPC QBiP-8665A/ Manuel utilisateur

VersaLogic

VersaLogic Python EBX-11 Manuel utilisateur

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuel utilisateur

CompuLab

CompuLab SB-A510 Manuel utilisateur

Boser

Boser HS-7321 Manuel utilisateur

Premier Farnell

Premier Farnell Embest SBC8530 Manuel utilisateur

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuel utilisateur

Aaeon

Aaeon UP Manuel utilisateur

Portwell

Portwell WUX Series Manuel utilisateur