Danfoss CLX Home Manuel utilisateur

Danfoss CLX Home

Installation Manual

MAKING MODERN LIVING POSSIBLE

SOLAR INVERTERS

Contents

1. Introduction 2

Safety Instructions 2

Product Overview 3

Scope of Delivery 4

2. Installation 5

Installing CLX Home 5

Mounting 5

Installing the Danfoss SolarApp 5

System Requirements 5

Installation on Smartphone or Tablet 5

Browser Plugin Installation 6

3. Configuration 8

First Use of the Danfoss SolarApp 8

Settings 8

Granting Remote Access 9

Delete Existing User from the Access Control List 10

Disable Remote Access 10

Navigating to Another CLX Monitored Plant 10

Plant Name 11

CO2 Emission 11

Revenue 11

Configuring Date and Time 11

Language 11

About 11

CLX Portal Upload 11

Firmware Update of the CLX Home Box 11

4. Application and Data 12

Main Page 12

Production Graphs 13

Logging Capacity 14

Logging Interval 14

Plant Status 14

Detailed Inverter Data 15

5. Technical Data 16

6. Troubleshooting and FAQ 17

Troubleshooting and FAQ 17

Contents

L00410618-03_02 1

1. Introduction

1.1. Safety Instructions

The reader must be familiar with the rules and regulations for electrical equipment and connec-

tion to the mains power network. Pay particular attention to general safety regulations for

working with electrical systems.

Observe the safety instructions below to prevent injury to persons and damage to connected

equipment.

Contact with electrically conductive parts after disconnection from the mains supply can be dan-

gerous. Do not connect the equipment to the mains supply before installation.

Equipment must be installed only in protected/dry environments.

Do not use metallic/pointed/sharp instruments to access the enclosure.

Prevent cables and terminals from being exposed.

The power plug must be accessible at all times.

Qualified personnel only must perform service.

Equipment must only be operated at the rated supply voltages. A suitable power

supply unit is included in the scope of delivery.

Note:

Observe the manufacturer's instructions regarding the handling of power supply units (espe-

cially switching units).

Observe the manufacturer's instructions regarding the handling of inverters.

1.2. Introduction

This document describes how to configure the CLX Home product for use with a Danfoss solar

inverter to enable monitoring of up to 3 DLX, ULX, TLX, TLX+, TLX Pro, TLX Pro+, FLX or FLX

Pro *) inverters from a Smartphone, tablet or PC-based browser.

*) TLX Pro, TLX Pro+ and FLX Pro variants only when the inverters are connected via RS-485 and not us-

ing the master/follower concept.

To install and configure the CLX Home box:

• Connect the CLX Home box to the inverter and the internet (safely behind a firewall,

without configuring the latter).

• Install the Danfoss SolarApp.

• Enter email address and follow the setup procedure described in the Danfoss SolarApp.

For details refer to Chapter 2. When these steps are completed, it is possible to start monitoring

the plant from anywhere in the world.

Note:

All values shown are based on inverter data and are not legally binding.

1. Introduction

2 L00410618-03_02

Note:

For the servicing of the CLX Home box, third-party persons can connect to the CLX Home

box and read the production data.

1.3. Product Overview

150AA020.10

12 3 4

Illustration 1.1: CLX Home Box - Connection Area

Legend

1 Power supply with circular connector (9 VDC)

2 Ethernet port for LAN

3 & 4 RS-485 for connection to the inverter network

1 2 3 4

150AA021.10

Illustration 1.2: CLX Home Box - LEDs

LEDs

LED 1 Green - power on

LED 2 Red - flashing red - ConnectSmart is operating correctly

LED 3 Yellow - CLX Home is operating correctly

LED 4 Green - CLX Home is connected to the solar inverter

1. Introduction

L00410618-03_02 3

1.4. Scope of Delivery

The following items are included in the delivery:

• CLX Home

• Installation Manual

• Power supply

• RJ-45 termination plugs for terminating the RS-485 inverter network

• Ethernet cable (standard network cable): RJ-45 cat 5e, for connecting the CLX Home

box to the internet router

1. Introduction

4 L00410618-03_02

2. Installation

2.1. Installing CLX Home

Perform the following steps to install the CLX Home box:

1. Connect the power supply to the box and the mains supply.

2. Connect the Ethernet cable to the CLX Home box and to an inverter/network router.

3. Plug the RJ-45 terminator into one of the two RJ-45 RS-485 sockets of the CLX Home

box.

4. Using an RJ-45 network cable (not included in the scope of delivery) (minimum cat 5e

STP network cable is required) connect the inverter to the free RJ-45 socket of the CLX

Home box.

5. If more than one inverter must be connected, connect the inverters in an RS-485 daisy

chain (depending on inverter type, refer to the corresponding inverter manual).

6. Terminate the inverter bus at the far end with the second RJ-45 terminator (included

in the scope of delivery), see the corresponding inverter manual for details. Different

inverter types are terminated differently.

Note:

For initial configuration, it is important that the PC, tablet or Smartphone (with the Danfoss

SolarApp installed) are connected to the same local network as the CLX Home. When the

CLX Home is configured using a Smartphone or a tablet, the internet router must support

WiFi.

2.1.1. Mounting

The CLX Home is intended for either wall mounting using two 3 mm screws (not included in the

scope of delivery), or it can be used as a table top unit.

2.2. Installing the Danfoss SolarApp

2.2.1. System Requirements

The Danfoss SolarApp can be used on Smartphone, tablet or via PC-based Internet browser.

Smartphone and tablet using the iOS (Apple) or the Android operating system are supported.

For the PC-based browser plugin, Firefox or Internet Explorer must be used.

Operating Systems Version

iOS Min. version 5.0+

Android Min. version 3.0+

Windows, Mac OS X and Linux Internet Explorer: Min. version 9

Firefox: Min. version 9

Table 2.1: System Requirements

2.2.2. Installation on Smartphone or Tablet

1. Download the Danfoss SolarApp from Google Play (formerly Android Market) or from

the AppStore.

2. Start the App.

2. Installation

L00410618-03_02 5

3. Either sign in with an existing account or create a new one:

3.1 Enter an e-mail address and a password.

3.2 Click on 'Create Account'.

3.3 A verification e-mail will come.

3.4 Click on the link in the verification e-mail.

4. Return to the Danfoss SolarApp and click on 'Sign In'. Sign in using the newly created

account.

Illustration 2.1: Login Screen - iPhone Example

Note:

Enable auto login to be automatically logged in every time the Danfoss SolarApp is started.

5. A redirection to the 'Discovery page' follows after signing in. For further details, see

the section

Configuration, First use of the

Danfoss

SolarApp

2.2.3. Browser Plugin Installation

1. Navigate to www.clx.danfoss.com to download the browser plugin, following the in-

structions.

2. Once the browser plugin has been installed and an account has been created, enter

the address of the PV plant: serialnumber.clx.danfoss.com in the address line of the

browser. The serial number is in a format, where the first 8 digits are the HW version

of the CLX Series and each CLX box has a different HW version:

-CLX Standard: 139F0196

-CLX Standard GM: 139F0194

-CLX Home GM: 139F0193

The remaining digits are visible on the label at the back of the CLX box, see the illus-

tration below:

2. Installation

6 L00410618-03_02

Illustration 2.2: Product Label

The product label example shows CLX Standard GM: the address to enter in the web

browser would be: 139F0194075201P222.clx.danfoss.com.

3. Follow the procedure and log in with an existing account or create a new one:

3.1 Enter an email address and a password.

3.2 Click on 'Create account'.

3.3 A verification email will come.

3.4 Click on the link in the verification email and sign in.

4. The main page of the Danfoss SolarApp opens. If not, see

Configuration, Trouble-

shooting

for help.

2. Installation

L00410618-03_02 7

3. Configuration

3.1. First Use of the Danfoss SolarApp

Note:

Ensure connection to the same local network as the CLX box, before continuing with the

configuration.

After installation and profile creation, the 'Discovery page' appears. The page can always be ac-

cessed via [Settings → Remote access → Scan for local devices]. All reachable CLX products are

listed here.

Illustration 3.1: Discovery Page

When connected to the same local network as the CLX product, the address of the CLX box is

now shown.

By clicking the address representing the accessible CLX box (red arrow in the illustration), the

main page of the current CLX box appears. At the same time, the CLX box is configured for re-

mote access by the current user. Other users may be added as described in the section

Set-

tings, Granting Remote Access

See Chapter 4,

Application and Data

, for a detailed description of the Danfoss SolarApp itself.

Note:

Set up the Danfoss SolarApp start page as home page or bookmark, for use on PC or via

Internet browser.

3.2. Settings

The settings menu link is located in the bottom right corner of the main page of the Danfoss

SolarApp (see illustration in the section

Main Page

). Via the settings menu the following config-

uration options are available:

• Remote Access:

-Grant remote access, see the address of the plant or set another plant as 'de-

fault'.

3. Configuration

8 L00410618-03_02

-Search for a local CLX box.

-Navigate to another CLX controlled PV plant.

-View history of previously accessed CLX controlled plants.

-Change the access control list.

-Show login screen.

• Configure plant name.

• Configure settings for Revenue and saved CO2.

• Change the 'date and time' configuration.

• Change the default language settings.

•Enable upload to the CLX Portal*).

• Firmware update of CLX Home.

*) Only used in CLX Home.

Each configuration option is described in detail below.

Illustration 3.2: Settings

3.2.1. Granting Remote Access

Remote access of the CLX Home product is controlled via an access control list. The user who

configured the CLX Home box for initial use is always added automatically to the remote access

list. As default, remote access is enabled.

To grant remote access to another user, proceed as follows:

1. Navigate to [Settings → Remote access].

2. Scroll down to the 'Access control' section.

3. Ensure that 'Remote access' is on.

4. Select 'Add user'. The 'Add user' screen opens.

5. Enter the email address of the user to whom access should be granted:

• Select 'Grant access and notify' when an email should be sent containing a

link to the plant, to inform this particular person.

3. Configuration

L00410618-03_02 9

Table des matières

Autres manuels Danfoss Onduleur

Danfoss

Danfoss VLT 2800 Series Manuel utilisateur

Danfoss

Danfoss ULX 1800o Manuel utilisateur

Danfoss

Danfoss EM-PMI375 Manuel utilisateur

Danfoss

Danfoss VLT 2822 Manuel utilisateur

Danfoss

Danfoss Optyma Plus Mode d’emploi

Danfoss

Danfoss CLX Series Manuel utilisateur

Danfoss

Danfoss VLT Micro Drive FC 51 Series Manuel utilisateur

Danfoss

Danfoss DLX 3.8 Manuel utilisateur

Danfoss

Danfoss TripleLynx Manuel utilisateur

Danfoss

Danfoss VLT 2010 Manuel utilisateur

Danfoss

Danfoss VLT AutomationDrive FC 300 Mode d’emploi

Danfoss

Danfoss VLT AutomationDrive FC 300 Manuel utilisateur

Danfoss

Danfoss VLT FCD 303 Manuel utilisateur

Danfoss

Danfoss TripleLynx CN Manuel utilisateur

Danfoss

Danfoss DLX 3.8 UL Manuel utilisateur

Danfoss

Danfoss DLX 3.8 UL Manuel utilisateur

Danfoss

Danfoss VACON NX FI6 Manuel utilisateur

Danfoss

Danfoss VLT AutomationDrive FC 360 Manuel utilisateur

Danfoss

Danfoss Holip HLP-C+ Series Manuel utilisateur

Danfoss

Danfoss TripleLynx Manuel utilisateur

Danfoss

Danfoss Type 12 BD150 105N0912 Manuel utilisateur

Danfoss

Danfoss EM-PME375 Series Manuel utilisateur

Danfoss

Danfoss FLX 17 Pro Manuel utilisateur

Danfoss

Danfoss VACON NXP FI9 Manuel utilisateur

Manuels Onduleur populaires d'autres marques

Fourgroup

Fourgroup Easy Manuel utilisateur

Velleman

Velleman PI300M Manuel utilisateur

Sungrow

Sungrow SG350HX-US Manuel utilisateur

WilTec

WilTec 61897 Manuel utilisateur

SMA

SMA SUNNY BOY STORAGE 2.5 Manuel utilisateur

Simplicity

Simplicity LANDLORD 316 Manuel utilisateur

Santak

Santak SMAX 3000 Manuel utilisateur

ATON

ATON RA.Store-3 Manuel utilisateur

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuel utilisateur

Tektronix

Tektronix CFG250 Manuel utilisateur

Champion

Champion 200989 Manuel utilisateur

Vanner

Vanner 20-500 Series Manuel utilisateur

GE GEP Manuel utilisateur

Astrel Group

Astrel Group Power Reducer Guide rapide

MULTIQUIP

MULTIQUIP GDP-5H Mode d’emploi

GoWISE

GoWISE PS1007 Manuel utilisateur

Promate

Promate PM13500D ES Manuel utilisateur

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuel utilisateur