Danfoss KoolKey Manuel utilisateur

User Guide

KoolKey

Danfoss

80G8153

Principle

KoolKey is an interface and programming device to:

• Connect EET Controller with PC and act as a gateway when working

online using KoolProg® application on the PC.

• Act as programming key to program settings into EET controllers in the

production and the ﬁeld.

KoolProg®as Programming Key

Programming key function is used for transferring parameter ﬁles from key to controller and vice versa.

a. EETa controller with main power

KoolKey

EETa

To COM 

To main power

Programming a powered-up controller:

• Power up the controller using 120 V / 230 V power supply

• Connect the koolKey to controller TTL port using KoolKey cable

Note: EET compact (EETc) does not support this option.

Programming an unpowered controller:

• Connect Power bank or 5 V power supply to KoolKey USB type A port.

• Connect the Koolkey to controller TTL port using KoolKey cable.

Danfoss

80G8116

KoolKey as a Gateway

Gateway mode enables to work online with the connected controller

through KoolProg® on a PC.

KoolProg® allows following functions:

• Set Parameters – Create, view and edit controller settings.

• Copy to Controller – Program settings ﬁle created oﬄine to connected

controller.

• Online service – Monitor real time operations of the controllers and make

adjustments to the settings while connected.

Connection:

• Connect the KoolKey to USB port of PC installed with KoolProg® software

• Connect the controller to KoolKey using KoolKey cable

(Refer KoolProg® User Guide for detailed instructions on how to use KoolProg.

Download KoolProg® at: koolprog.danfoss.com)

Danfoss

80G8147

b. EETc/EETa controller without main power

To Power bank /

5 V power supply

KoolKey

EETc/EETa

To COM 

Danfoss

80G8146

To COM 

Type C USB



2 | BC349529829398en-000101

Step Action Illustration LED info

Power up KoolKey by either connecting

to an external power bank or to a

powered up controller.

Danfoss

80G8148

2. Green

1. Re

• The LED will ﬂash red indicating KoolKey

is powered up.

• After few seconds LED would turn green

indicating successful connection and data

transfer readiness

a. Write funtion: Short press the button

(1 sec) to transfer data from the

KoolKey to the controller.

Note: When KoolKey is connected to

power bank, the write functions gets

initiated automatically as soon as the

Koolkey is connected to controller

without pressing the button.

Danfoss

80G8149

Data

~1 sec.

Green

Green LED ﬂashes –

Indicating parameter ﬁle upload

b. Read Function: Long press the button

(3 sec) to transfer data from the

controller to the KoolKey.

Note:

• Read function is not supported

when KoolKey is powered up from a

power bank.

• Make sure that an xml ﬁle with

the same name is already saved in

KoolKey before executing the read

function.

Danfoss

80G8150

Green

~3 sec.

Data

Green LED ﬂashes -

Indicating parameter ﬁle download

Successful ﬁle transfers

(This could take around 5 – 8 sec for

read and write functions to successfully

complete.

Danfoss

80G8151

Green

Constant green

Unsuccessful ﬁle transfer

(Check connection and compatible

programing ﬁle).

Danfoss

80G8152

Red ﬂashes

ADAP-KOOL®

Parameter ﬁle transfer steps:

Note: Do not leave the cable hanging when connected to a live controller.

Autres manuels Danfoss Contrôleurs

Danfoss

Danfoss ECL Comfort 310 Manuel utilisateur

Danfoss

Danfoss 51 Series Manuel utilisateur

Danfoss

Danfoss PLUS+1 Series Manuel

Danfoss

Danfoss AK-CC 550 Manuel utilisateur

Danfoss

Danfoss 5000 Flux Manuel utilisateur

Danfoss

Danfoss PLUS+1 Series Manuel

Danfoss

Danfoss EvoFlat WSS Manuel utilisateur

Danfoss

Danfoss ERC 211 Manuel utilisateur

Danfoss

Danfoss Saginomiya RGE-Z3R2-7 Manuel utilisateur

Danfoss

Danfoss EKC 202A Manuel utilisateur

Danfoss

Danfoss AMV 335 Manuel utilisateur

Danfoss

Danfoss vlt soft starter mcd 500 Manuel utilisateur

Danfoss

Danfoss erc 112 Manuel utilisateur

Danfoss

Danfoss AK-CC 750A Manuel utilisateur

Danfoss

Danfoss VLT Decentral FCD 300 Manuel utilisateur

Danfoss

Danfoss ECL Comfort 310 Manuel utilisateur

Danfoss

Danfoss 140F1139 Manuel utilisateur

Danfoss

Danfoss EKC 202C-MS Manuel utilisateur

Danfoss

Danfoss VLT Soft Starter MCD 600 Manuel utilisateur

Danfoss

Danfoss VLT MCD 200 Manuel utilisateur

Danfoss

Danfoss AK-SM 850 Manuel utilisateur

Danfoss

Danfoss Redan PM Manuel utilisateur

Danfoss

Danfoss PN 25 Manuel utilisateur

Danfoss

Danfoss AME 85 QM Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur