Danfoss AMV 110 NL AQT Manuel utilisateur

VD.LE.A6.02 © Danfoss 01/2014

DEN-SMT/SI

Actuators for three point control

AMV 110 NL, AMV 120 NL

Data sheet

Description The actuators are used together with

automatically balanced combination valve type

AB-QM for DN 10 to DN 32.

Typical applications for that products are:

temperature control and permanent automatic

balancing on terminal units (fan-coils, chilled

ceilings, air-handling units..).

Main data:

• Gap detection at stem up position

•3 point version

•Force switch-oﬀ at stem down position

prevents overload of actuator and valve

•No tools required for mounting

•Maintenance-free lifetime

•Low-noise operation

•Halogen free cables

Ordering Actuators

Type Supply voltage Speed Cable length Code No,

(V) (s/mm) (m) Single Pack Industry Pack

AMV 110 NL

24 AC

1,5 082H8056 /

5,0 082H8080 082H8076

10 082H8090 082H8086

AMV 120 NL 12

1,5 082H8058 /

5,0 / 082H8078

10 /082H8088

Note:

Actuators with 5 m and 10 m cable length are produced on request. Please note this increases lead time.

Spare parts

Type Length

(m) Code No.

Cable (24 V) 5082H8052

10 082H8054

2VD.LE.A6.02 © Danfoss 01/2014

DEN-SMT/SI



Data sheet Actuators for three point control AMV 110 NL, AMV 120 NL

Installation Mechanical

The actuator should be mounted with the valve

stem in either horizontal position or pointing

upwards.

The actuator is ﬁxed to the valve body by means

of a mounting ring, which requires no tools for

mounting. The ring should be tightened by hand.

Electrical

Important: It is strongly recommended that the

mechanical installation is completed before the

electrical installation.

Each actuator is supplied with the connecting

cable for the controller.

Disposal The actuator must be dismantled and the

elements sorted into various material groups

before disposal.

Technical data

Type AMV 110 NL AMV 120 NL

Power supply V 24 AC, +10 to –15 %

Power consumption running VA 1

standby W 0

Frequency Hz 50 Hz/60 Hz

Close of force N 130

Stroke mm 5

Speed s/mm 24 12

Relative humidity max. 80 %

Max. medium temperature

°C

120

Ambient temperature 0 … 55

Storage and transport temperature –40 … 70

Protection class III safety extra-low voltage

Grade of enclosure IP 42

Weight kg 0,3

- marking in accordance with

standards

Low Voltage Directive (LVD) 2006/95/EC: EN 60730-1, EN 60730-2-14

EMC Directive 2004/108/EC: EN 61000-6-2, EN 61000-6-3

Wiring

VD.LE.A6.02 © Danfoss 01/2014

DEN-SMT/SI

position

indicator

⑤

①

②

③④

Data sheet Actuators for three point control AMV 110 NL, AMV 120 NL

Commissioning The factory setting of the spindle is the fully

stem up position because of easier mechanical

connection of the actuator on the valve.

1. Check the valve neck. The actuator should be

in stem up position (factory setting). Ensure

that the actuator is mounted securely on the

valve body

2. Wire the actuator according to the

wiring diagram

3. The direction of the stem movement can be

observed on the position indicator

Installation and

commissioning procedure

(if required)

Do not touch anything on

the PCB!

Do not remove the cover

before the power supply is fully

switched oﬀ.

Manual override

(for service purposes only)

Caution:

Do not manually operate the

drive if power is connected!

Do not dismount the actuator

from the valve when it is in a

stem down position!

If dismounted in a stem down

position, there is a high risk that

the actuator gets stuck.

• Removecover①

• Pressandholdthebutton②(on the

bottom side of the actuator) during manual

override ③

• Replacecover④

• Installactuatoronvalve⑤

Remark:

A ‘click’ sound after energising the actuator

indicates that the gear wheel has jumped into

normal position.

VD.LE.A6.02

Produced by Danfoss A/S © 01/2014

Data sheet Actuators for three point control AMV 110 NL, AMV 120 NL

Dimensions (mm)

Autres manuels pour AMV 110 NL AQT

Ce manuel convient aux modèles suivants

Autres manuels Danfoss Contrôleurs

Danfoss

Danfoss AME 410 Manuel utilisateur

Danfoss

Danfoss AIPA Manuel utilisateur

Danfoss

Danfoss AME 15 QM Manuel utilisateur

Danfoss

Danfoss DEVIreg 850 IV Manuel utilisateur

Danfoss

Danfoss CF-MC Manuel utilisateur

Danfoss

Danfoss VLT AQUA Drive FC 200 Mode d'emploi

Danfoss

Danfoss VLT Soft Starter MCD 600 Manuel utilisateur

Danfoss

Danfoss VLT MCD 600 Manuel utilisateur

Danfoss

Danfoss VLT AutomationDrive FC 300 Mode d’emploi

Danfoss

Danfoss ADAP-KOOL AK-PC 651 Manuel utilisateur

Danfoss

Danfoss NovoCon S Digital Manuel utilisateur

Danfoss

Danfoss AME 435 QM Manuel utilisateur

Danfoss

Danfoss VLT FC Series Manuel utilisateur

Danfoss

Danfoss ADAP-KOOL AK-PC 783 Mode d’emploi

Danfoss

Danfoss VLT 5000 Manuel utilisateur

Danfoss

Danfoss ERC 112D VSC Manuel utilisateur

Danfoss

Danfoss NovoCon S Manuel utilisateur

Danfoss

Danfoss AME 335 Manuel utilisateur

Danfoss

Danfoss AMV 20 SL Manuel utilisateur

Danfoss

Danfoss ERC 211 Manuel utilisateur

Danfoss

Danfoss ECL Comfort 210 Manuel utilisateur

Danfoss

Danfoss VFQ 2 Manuel utilisateur

Danfoss

Danfoss VLT AutomationDrive Mode d’emploi

Danfoss

Danfoss MCD 500 Series Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur