Danfoss ADAP-KOOL AK-CC 750 Manuel utilisateur

Controller replacement

AK-CC 750 on AK-SM 800

Service Guide

ADAP-KOOL® Refrigeration Control System

Service Guide |Controller replacement AK-CC 750 on AK-SM 800

© Danfoss | ADAP-KOOL® | 2018.08

2 | AX278947943210en-000101

AK-CC 750 Controller Replacement

(pn# 080Z0139)

The following steps describe the procedure for replacing an AK-CC

750 case controller on an AK-SM 800 series controller.

At AK-CC 750:

1. Disconnect the 24 volt power plug, communication cable, and

all other terminal blocks from the AK-CC 750 controller being

replaced. Note original locations of each cable and terminal

block, so they can be reconnected correctly after replacement is

done.

2. Remove the controller.

3. Install replacement AK-CC 750. Set rotary dials to match address

of original controller. Reconnect the communication cable, the

terminal blocks, and ﬁnally the 24 volt power plug.

4. Connect to AK-CC 750 with PC and Service Tool software.

(default login is‘SUPV’ and 123).

5. In Service Tool software, press Service button (yellow wrench)

and go to‘Select Application’.

6. Select appropriate quick setup. This will close down Service

Tool.

7. Reconnect to AK-CC 750 via Service Tool, and return to ‘Select

application’.

8. Set # of evaporators to appropriate value.

At AK-SM 800:

1. Login to controller

2. Press menu button on keypad and select option 2 for‘Network

Nodes’.

Service Guide |Controller replacement AK-CC 750 on AK-SM 800

AX278947943210en-000101 | 3

© Danfoss | ADAP-KOOL® | 2018.08

3. Highlight ‘Press for complete rescan’ and press Ok so that AK-CC

750 can be brought online.

4. Once scan is complete, verify new AK-CC 750 has come online.

To do so, from current screen go to Conﬁg Status tab, locate

case controller address in list and verify status column shows

‘online’.

6. To download setpoints to controller, press gear button on

keypad to enter conﬁguration menu.

Service Guide |Controller replacement AK-CC 750 on AK-SM 800

© Danfoss | ADAP-KOOL® | 2018.08

4 | AX278947943210en-000101

7. Now navigate to Control->Refrigeration->Circuits->Setup. In

the drop-down on the left, locate the case controller being

replaced. If prompted at any point to‘retrieve conﬁguration’, be

sure to select no.

8. Choose ‘Select Application’ from the drop-down on the right,

and ensure Main Switch is set to‘OFF’ and Conﬁguration Lock

set to‘Unlocked’. If not, scroll to setting so that it is highlighted,

and press OK key on keypad to toggle to correct option.

9. Now navigate to Download tab, highlight and press OK key

on ‘press to deselect all’. Next, highlight the case controller to

download to, and press OK. This should place a check mark in

the box next to the controller address.

Service Guide |Controller replacement AK-CC 750 on AK-SM 800

AX278947943210en-000101 | 5

© Danfoss | ADAP-KOOL® | 2018.08

10. Scroll to top of screen and highlight/press OK on ‘Press to

download to selection’. You will see a prompt not to leave the

screen as the download occurs. Once complete/successful,

a timestamp will be placed under the Time column (2nd

screenshot below).

11. Return to Setup tab. Ensure drop-down on right is still set to

‘Select Application. Change Conﬁguration Lock to‘Locked’ and

Main Switch to‘On’ for case operation to begin.

© Danfoss | ADAP-KOOL® | 2018.08

6 | AX278947943210en-000101

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Danfoss Contrôleurs

Danfoss

Danfoss AME 110 NL Manuel utilisateur

Danfoss

Danfoss AMD 610 AS Manuel utilisateur

Danfoss

Danfoss ECL 2000 Manuel utilisateur

Danfoss

Danfoss FC 300 Mode d’emploi

Danfoss

Danfoss 51 Series Manuel utilisateur

Danfoss

Danfoss pved-cl Manuel utilisateur

Danfoss

Danfoss MCX08M Manuel utilisateur

Danfoss

Danfoss EET Series Manuel utilisateur

Danfoss

Danfoss AK-PC 551 Manuel utilisateur

Danfoss

Danfoss RAVK Manuel utilisateur

Danfoss

Danfoss ECL Comfort 110 Manuel utilisateur

Danfoss

Danfoss Old ICAD 600 series Manuel utilisateur

Danfoss

Danfoss MCI 25 Manuel utilisateur

Danfoss

Danfoss AFPQ 2 Manuel utilisateur

Danfoss

Danfoss NovoCon S Manuel utilisateur

Danfoss

Danfoss MCD 500 Series Manuel utilisateur

Danfoss

Danfoss Icon Master Controller 24 V Manuel utilisateur

Danfoss

Danfoss AK-CS Manuel utilisateur

Danfoss

Danfoss A333 Series Manuel d'instructions d'installation

Danfoss

Danfoss KP 15A Manuel utilisateur

Danfoss

Danfoss PVE 7 Series Manuel utilisateur

Danfoss

Danfoss ERC 214 Manuel utilisateur

Danfoss

Danfoss AMV 610 Manuel utilisateur

Danfoss

Danfoss ERC 213 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur