Danby DAR044A1SSO Manuel utilisateur
Please write down your serial number and date of purchase. You
must keep the original proof of purchase receipt to receive warranty
services.
Register your new appliance online and fill out a product survey to
receive a FREE 2 MONTH WARRANTY EXTENSION at www.danby.
com/support/product-registration/
Visit www.Danby.com to access self-service tools, FAQs and much more.
For Customer Service, please fill out the web form at www.danby.com/
support, or call 1-800-263-2629.
1
*
*
Danby Products Ltd, Guelph, Ontatrio, Canada N1H 6Z9
Danby Products Inc, Findlay, Ohio, USA 45840
*Trademark of Danby Products Printed in China
2023.03.21
We are proud of our quality
products and we believe in
dependable service. You are
entitled to warranty coverage as
described in this owner’s manual.
OUTDOOR COMPACT REFRIGERATOR
Model
Number DAR044A1SSO
Serial
Number
Date of
Purchase
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
2
THE RECOMMENDED OPERATING AMBIENT TEMPERATURE IS FROM
7°C (45°F) TO 43°C (109°F) WHEN NOT IN DIRECT SUNLIGHT.
SAFETY REQUIREMENTS
DANGER: Risk of fire or explosion. Flammable refrigerant used. Do not
puncture refrigerant tubing.
• Do not use mechanical devices to defrost refrigerator.
• Ensure that servicing is done by factory authorized service personnel,
to minimize product damage or safety issues.
• If the power supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similar qualified person in order to
avoid hazard.
• Consult repair manual or owner’s guide before attempting to service
this product. All safety precautions must be followed.
• Dispose of properly in accordance with federal or local regulations.
• Follow handling instructions carefully.
• Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
• Suitable for camping use.
WARNING: Keep ventilation openings, in the appliance enclosure or in
the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to
accelerate the defrosting process, other than those recommended by the
manufacturer.
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
3
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended
by the manufacturer.
CAUTION: Children should be supervised to ensure that they do not play
with the appliance.
DANGER: Risk of child entrapment. Before throwing away an old
appliance:
• Remove the door or lid.
• Leave shelves in place so that children may not easily climb inside.
DANGER: Do not add a lock to the door or lid. This can cause child
entrapment and harm.
This appliance is not intended for use by persons (including children)
whose physical, sensory or mental capabilities may be different or
reduced, or who lack experience or knowledge, unless such persons
receive supervision or training to operate the appliance by a person
responsible for their safety.
This appliance is intended to be used in household and similar
applications such as:
• Staff kitchen areas in shops, offices and other working environments;
• Farm houses and by clients in hotels, motels and other residential
type environments;
• Bed and breakfast type environments;
• Catering and similar non-retail applications.
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
4
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding reduces the risk of
electrical shock by providing an escape wire for the electrical current.
This appliance has a cord that has a grounding wire with a 3-prong
plug. The power cord must be plugged into an outlet that is properly
grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a
properly grounded 3-prong wall outlet. The serial rating plate indicates
the voltage and frequency the appliance is designed for.
WARNING - Improper use of the grounding plug can result in a risk
of electric shock. Consult a qualified electrician or service agent if the
grounding instructions are not completely understood, or if doubt exists
as to whether the appliance is properly grounded.
Do not connect your appliance to extension cords or together with
another appliance in the same wall outlet. Do not splice the power
cord. Do not under any circumstances cut or remove the third ground
prong from the power cord. Do not use extension cords or ungrounded
(two prongs) adapters.
INSTALLATION INSTRUCTIONS
5
LOCATION
• Two people should work together to move the appliance.
• Remove interior and exterior packaging prior to installation. Wipe
the outside with a soft, dry cloth and the inside with a lukewarm wet
cloth.
• Place the appliance on a floor that is strong enough to support it
when it is fully loaded.
• Prolonged exposure to extreme heat or direct sunlight may adversely
affect the performance of this unit. Please check the interior
temperature and contents if extreme heat or sunlight are present for
extended periods.
• This appliance is suitable for outdoor use and is weather resistant,
however, it is not waterproof. Do not use this appliance near a
swimming pool or hot tub.
• Before connecting the appliance to a power source, let it stand
upright for approximately 6 hours. This will reduce the possibility
of a malfunction in the cooling system from handling during
transportation.
• Extreme cold will affect the performance and reliability of this unit.
Do not use this applaince in environments that are 7°C (45°F) or less.
LEVELING INSTRUCTIONS
There is an adjustable foot on the bottom of the appliance that can be
turned up or down to ensure that the appliance is level.
1. Turn the adjustable foot counter-clockwise until the top of the foot is
touching the bottom of the chassis.
2. Slowly turn the adjustable foot clockwise until the appliance is level.
6
DOOR HANDLE INSTALLATION
The door handle will ship inside the cabinet to avoid damage during
shipping. It can be installed using the provided hex key and hexagon
bolts found in the accessory bag.
IMPORTANT
Ensure that the door is fully
closed when the appliance is in
operation. Failure to fully close
the door can lead to excessive
condensation and potential
water damage. Danby will not
be responsible for damages from
misuse.
DIMENSIONS
This appliance has the following dimensions:
• 52 cm (20.5”) wide without the handle
• 52.7 cm (20.7”) wide with the handle.
• 84.1 cm (33.1”) high with the regular feet
• 89 cm (35.1”) with the casters
• 52.4 cm (20.6”) deep without the handle
• 58.2 cm (22.9”) deep with the handle
• Allow 12.7 cm (5 inches) of space on the back, sides and top of the
appliance for proper air flow.
• This appliance is intended for free-standing installation only and
is not intended to be built into a cabinet or counter. Building in this
appliance can cause it to malfunction.
INSTALLATION INSTRUCTIONS
OPERATING INSTRUCTIONS
7
CASTER INSTALLATION
To reduce the risk of personal injury or property damage, we
recommend unplugging the appliance and using two people to complete
the caster installation.
1. Place the appliance on its back. Protect the floor and the back of the
unit from damage by laying the appliance on a towel or blanket.
2. Remove the three solid feet. Unscrew the adjustable foot. Keep the
solid feet and adjustable foot for future use.
3. Install the non-locking casters on the back of the appliance where the
mounting holes are already pre-drilled and threaded.
4. Install the larger locking caster at the front of the appliance opposite
the hinge.
5. Remove the hinge plate installed on the appliance and replace it with
the hinge plate provided in the caster box.
6. Use the spanner provided in the caster box to install the smaller
locking caster into the pre-drilled hole in the caster hinge plate.
7. Once completed, allow the unit to stand upright for a minimum of 6
hours before plugging in to avoid damage to internal components.
A
B
C
A
A
D
E
F
G
A. Solid feet
B. Adjustable foot
C. Adjustable foot hinge plate
D. Non-locking casters
E. Larger locking caster
F. Caster hinge plate
G. Smaller locking caster
OPERATING INSTRUCTIONS
8
FEATURES
1. Interior Light and Thermostat Dial: Temperature can be adjusted by
turning the thermostat dial on the inner ceiling of the appliance.
2. Glass Shelves
3. Defrost Water Outlet: Ice that forms inside the appliance will
automatically thaw and drain through this outlet.
4. Crisper
5. CANSTOR™ Door Liner: Holds 355ml cans of pop, juice, or beer.
6. Bottle Rack: For tall, small and medium cans or jars.
7. Magnetic Gasket: Tight fitting door seal keeps all the cooling power
locked inside.
8. Adjustable Foot: Adjust so the unit is level.
9. Lock (not pictured): To prevent a child from becoming trapped, keep
keys out of reach of children and not near the appliance.
1
2
3
4
5
6
7
8
OPERATING INSTRUCTIONS
9
TEMPERATURE SELECTION
The temperature of the appliance can be adjusted by turning the
thermostat dial.
• The larger dots indicate the coldest setting.
• The smaller dots indicate the warmest setting.
• The “OFF” position will turn off the cooling function.
Internal temperature of the appliance can vary based on ambient
temperature, the quantity of items stored and how frequently the door is
opened.
OFF
10
OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time
during this process, it must be allowed to remain upright for 6 hours
before plugging it in to avoid damage to the internal components.
1. Remove the hinge cover from the top right side of the cabinet.
Remove the screw hole covers from the top left side of the cabinet.
2. Remove the door spindle cover that covers the hinge hole on the
top left side of the door. Remove the hole cover from the top right
side of the door. Removing the hole cover may require a flat bladed
screwdriver.
3. Remove the upper hinge and upper hinge gasket from the top right
side of the cabinet. Remove the door from the cabinet.
4. Move the stop block from the bottom right side of the door to the
bottom left side of the door. Move the door handle to the right side of
the door. Move the screw hole covers from the right side of the door
to the left side of the door.
5. Remove the adjustable foot and the lower hinge from the bottom right
side of the cabinet. Remove the solid foot and screws from the bottom
left side of the cabinet. Install the solid foot on the bottom right side of
the cabinet. Install the lower hinge and adjustable foot on the lower
left side of the cabinet.
6. Remove the hinge pin from the upper hinge. Flip the hinge over and
reinstall the hinge pin on the other side.
7. Install the door onto the cabinet. Install the upper hinge and upper
hinge gasket.
8. Install the hole cover on the top left side of the door. Take the door
spindle cover from the accessory bag and install it on the top right
side of the door.
9. Install the upper hinge cover on the top left side of the door. Install the
screw hole covers on the top right side of the door.
Note: When reinstalling the door, ensure that the top of the door is level
with the top of the cabinet and that the rubber gasket makes a good seal
with the cabinet all the way around.
Table des matières
Langues :
Autres manuels Danby Réfrigérateur
Danby
Danby DCR016A1BBSL Manuel utilisateur
Danby
Danby Designer D9505W Manuel utilisateur
Danby
Danby Designer DFF8802W Manuel utilisateur
Danby
Danby DFF121C2WDBL Manuel utilisateur
Danby
Danby DCR016KA1WDB Manuel utilisateur
Danby
Danby Designer DAR044A4WDD-6 Manuel utilisateur
Danby
Danby DFF101B1WDB Manuel utilisateur
Danby
Danby Diplomat DFF8801W Manuel utilisateur
Danby
Danby Silhouette DFF1044BLS Manuel utilisateur
Danby
Danby Designer DAR195W Manuel utilisateur
Danby
Danby DCR016A3WDEDB Instructions de montage
Danby
Danby DFG17A1B Manuel utilisateur
Danby
Danby DAR033A1BBUD1 Instructions de montage
Danby
Danby DAR044A1SSDD Instructions de montage
Danby
Danby DBMF100B1WDB Manuel utilisateur
Danby
Danby DCR412BLS Manuel utilisateur
Danby
Danby Silhouette DAR604BL Manuel utilisateur
Danby
Danby DFF101E1WDB Manuel utilisateur
Danby
Danby DCR017A2WDB Instructions de montage
Danby
Danby DFF349WDB Instructions de montage
