danalock V3 SCANDI ASSA 2000 Manuel utilisateur
Danalock V3 SCANDI ASSA 2000 install page 1
123
456
7 8
119
Turn key
in opposite
direction.
10
Find
tailpiece kit
in the box.
13
Find
backplate
in the box.
Turn key
to pull out
safety plugs.
Remove
screws and
save two for
later use.
Insert key.
12 14
Fix the backplate
with the screws
you saved.
Danalock V3 SCANDI ASSA 2000 install page 2
16 1715
Break the tailpiece
using two pliers.
max.
35 mm
Click!
Press
until it
clicks.
The tailpiece
adapter needs
to be inserted
in the back of
the Danalock.
Fit the Danalock
over the backplate.
Ensure that the
tailpiece hits the
adapter.
19 2018
22 2321
25 2624
The tailpiece must not extend more
than 35 mm from the backplate.
Find Danalock and the
tailpiece adaptor in the box.
Align
the marks
on the
backplate
and baseplate.
Download the
Danalock app
and leave the
door open.
Turn clockwise to fasten. Remove the plastic to
activate batteries.
Click!
Create a user profile by pressing the blue
ring. Use this profile each time you sign
into the app.
If you have a user
profile use the
green ring.
Next you need to
press ”Menu” in the
top right corner,
and the press
”Add lock”.
A guide will now
lead you through
the installation
and configuration.
If you need to dismount the Danalock
insert a pen tip into the hole at the top
inner edge of the lock
and press while turning
the lock counter-
clockwise until
it releases.
This doesn’t
reset the lock,
but it may
need to be
re-calibrated
if fastened
to your
door again.
Autres manuels danalock Verrouillage
danalock
danalock V3-BTZBE Manuel utilisateur
danalock
danalock V3-BTZB Manuel utilisateur
danalock
danalock V3 US Manuel d'instructions d'installation
danalock
danalock V3 US Manuel utilisateur
danalock
danalock BT100 Circle Manuel utilisateur
danalock
danalock V3-BTZU Manuel utilisateur
danalock
danalock V3 SCANDI Manuel utilisateur
danalock
danalock V3 BT HK SCANDI Manuel utilisateur
danalock
danalock Danapad V3 Manuel utilisateur
danalock
danalock Danapad PADV3-BT Mode d’emploi
