Danacoid DE-6100HD Manuel utilisateur
High-definition Input
Interface
DE-6100HD
Instruction
Manual
Danacoid International Pte Ltd.
I. Product Appearance and
Description
! POWER indicator: The indicator of power
supply, which becomes on when the device is
electrified
" LINK indicator: The indicator of internet
access, which becomes on when the cable is
well-connected
# RUN indicator: The indicator of device
running, which becomes on during signal
transmission
! RESET Key: Use a long and thin object to
press the key for 10 seconds to reset the device
parameters and restore factory settings
" DVI-I Interface: Transmission of audios and
videos, connected to signal source
# IR Interface: Infrared input control interface
$ LINE Interface: Command line output
interface
% Internet Access: For internet access or power
over Ethernet (POE)
& Power Interface: Connect to power source
' RS-232 Interface: RS232 control interface,
connected to control devices
II. Product Features
n Full high-definition input interface machine
n Processing: 24-bit 60-frame image processing
n Output resolutions:
1024×768~1920x1080@60Hz
n Up to 16 windows for single node
simultaneously
n Support any window of signal source; network
protocols: DHCP, UDP, TCP/IP
n IP address: Automated acquisition/Static routing
n Support sync output of audio and video, support
high-definition image base
n Integrated central control function, standardized
programmable serial peripheral interface
n Support sync echo of signal windows,
WYSIWYG
n Support single-screen or multi-screen splicing
and display, achieve accurate synchronous
splicing, automated calibration, with a sync error
below 0.1ms
n Support dual-network hardware backup
n Adopt embedded hardware, ensuring 7*24 stable
operation
III. Product Specifications
Product Model
DE-6100HD
Output
Interface
1-channel DVI interface; 1-channel
dual-track stereo output, 3.5mm
audio jack
Network
2 RJ45 interfaces, 1000Mbps
Ethernet
Serial
Communication
1 D-Sub 9, support RS232 or 485
control protocol
Indicators
POWER indicator, LINK indicator,
RUN indicator
Power Supply
DC12V 3A (POE optional)
Power
Consumption
15W
Operating
Temperature
0~ +40
Operating
Humidity
10% ~ 90%, non-condensing
Dimensions
235*150.2*30mm
IV. System Architecture
1) Confirm that there is DHCP server or router with
DHCP functions in the network, so as to allocate
legitimate IP addresses to all network devices in the
system
2) Set the IP address of MICS server as static, such as
192.168.1.80, which will be beneficial to client login
and IIS setting
3) Conduct system connection and construction in
accordance with the above architecture
4) Connect the decoding device to the display device
(DLP/LCD or projector) through DVI cable, and
connect the internet interface of decoding node to the
exchange through Cat5e or Cat6
5) Connect the signal source (computer, DVD, analog
camera, Blu-ray DVD, high-definition camera etc.) to
the coding nodes of MICS system through respective
dedicated cable, and connect the internet interface of
coding node to the exchange through Cat5e or Cat6
cable
6) All devices are electrified for operation
Table des matières
Autres manuels Danacoid Équipement d'enregistrement
Manuels Équipement d'enregistrement populaires d'autres marques
Strymon
Strymon NIGHTSKY Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur
Tews Technologies
Tews Technologies TPMC465 Manuel utilisateur
Honeywell
Honeywell Excel 50 Manuel utilisateur
SeaLevel
SeaLevel COMM+8.LPCI Manuel utilisateur
Arturia
Arturia AUDIOFUSE STUDIO Manuel utilisateur
