Daktronics Galaxy GS6 Manuel utilisateur

Galaxy GS6 Display Internal Connection

Conversion Quick Guide

1 May 2017

DD3497847

Rev 02

201 Daktronics Drive Brookings, SD 57006

www.daktronics.com/support

800.325.8766

Page 1 of 2

Use this procedure to convert the external J-box

and quick-connect plates on

a Galaxy®GS6 display to

internal locations. Complete

these steps when mounting

GS6 displays ush on a

building or structure or when

two displays are mounted

back-to-back in a closer

conguration than the

standard back-to-back

mounting kit allows.

Required Tools

• Hex Head Wrench

• Channel Lock or 7/16″

socket

• Phillips Head Screw Driver

Moving the Quick

Connect Plates

1. Remove two bottom-left modules to access

the Primary display input quick-connect plate.

2. Remove two bottom-right modules to access

the mirror input/output quick-connect plate.

3. Remove the three screws that hold the quick-

connect plate to display backsheet. Save the

screws for reuse.

4. Remove the black grommet from the quick-

connect plate.

.438" Required

For Hardware x 2

Standard Back-To-Back

Configuration

Converted Back-To-Back

Configuration

Converted Flush Mount

Configuration

Cabinet

Face-to-Face

Dimension = 14"

Cabinet

Face-to-Face

Dimension >= 11"

Figure 1: Primary Input

Quick-Connect Plate

Figure 2: Mirror Input/

Output Quick-Connect

Plate

5. Rotate the quick-connect plate on the

backsheet so the quick connects are located

inside the cabinet.

6. Secure the plate

with the screws

removed in Step 3.

7. Thread the cables

through grommet

and into cabinet.

8. Snap the grommet in

place on outside of

display’s backsheet.

Figure 3: Input Quick-

Connect Plate Inside

Cabinet

Figure 4: Mirror Input/

Output Quick-Connect

Plate Inside Cabinet

Galaxy GS6 Display Internal Connection

Conversion Quick Guide

1 May 2017

DD3497847

Rev 02

201 Daktronics Drive Brookings, SD 57006

www.daktronics.com/support

800.325.8766

Page 2 of 2

9. Connect the cables to the jacks on the quick-

connect plate.

Reinstall Modules

Move the J-Box to Display’s Interior

1. Remove two bottom-left modules to access

the J-box location.

2. Pull wires from J-box into display cabinet.

3. Use a channel lock or socket wrench to loosen

the nut holding the J-box in place.

4. Attach the metal tabs found inside the J-box

to the corners of the J-box. Find the screws

needed to attach the tabs also inside the

J-box.

5. Place the J-box inside the display making sure

to align it with the existing J-box hole on the

display’s backsheet.

6. Use 1/4″ Tek screws (screws not provided) to

secure the J-box inside the display on the

backsheet.

7. Route electrical wires from the term panel to

the J-box.

8. Attach 3/4″ conduit to the back of the J-box.

9. Or seal the hole using on of the plugs found on

the J-box so no water can enter the J-box and

attach 1/2″ conduit to one of the knockouts on

the back of the display. Inside the cabinet,

route wires from the knockout into the J-box for

termination.

10. Attach J-box cover.

Reinstall Modules

Autres manuels pour Galaxy GS6

Autres manuels Daktronics Moniteur

Daktronics

Daktronics FUELIGHT FL-3000 Series Guide de l'utilisateur

Daktronics

Daktronics VF-2400 GEN 2 Series Manuel utilisateur

Daktronics

Daktronics DVX-2101 Series Manuel utilisateur

Daktronics

Daktronics PC-2002 Manuel utilisateur

Daktronics

Daktronics MS-2113 Manuel utilisateur

Daktronics

Daktronics DataTime DF-1012 Manuel utilisateur

Daktronics

Daktronics GALAXY ECCB Series Manuel utilisateur

Daktronics

Daktronics SLD 110 Manuel utilisateur

Daktronics

Daktronics Galaxy AF-3400 Series Manuel utilisateur

Daktronics

Daktronics FUELIGHT FL-3000 Series Manuel utilisateur

Daktronics

Daktronics 65 Series Manuel utilisateur

Daktronics

Daktronics TI-2041 Manuel utilisateur

Daktronics

Daktronics GALAXY GT6 Series Manuel utilisateur

Daktronics

Daktronics DVX-2821 Series Manuel utilisateur

Daktronics

Daktronics DATATIME 50 Series Manuel d'instructions

Daktronics

Daktronics Fuelight FL-4000 Series Manuel utilisateur

Daktronics

Daktronics Galaxy AF-3165 Manuel utilisateur

Daktronics

Daktronics Galaxy Series Manuel utilisateur

Daktronics

Daktronics 6000 Series Manuel utilisateur

Daktronics

Daktronics DF-2300 Series Manuel utilisateur

Daktronics

Daktronics ST-2373 Series Manuel utilisateur

Daktronics

Daktronics CH-1421V Mode d’emploi

Daktronics

Daktronics SW-2000 Series Manuel utilisateur

Daktronics

Daktronics ProPixel PSX-5901-125MN-3 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation