DAIZUKI DXTH-20 Manuel utilisateur
Step 3
Step 1
Operation
Steps
Step 4
Step 2
Step 5
Registration
Account
Download and
Install APP
Operation
Items
Login
Activate APP
Add Device to control
YES
YES
New Account
YES
YES
YES
NO
YES
Re-install APP
(registered before)
YES
YES
Registered Device will remain.
Operation guideline. Please take below simple guideline instruction as reference.
Note If you registered the account and added device before, when you re-install the APP again and login,
the added device will remain .
FCC Caution (FCC ID: 2AJCLTWAC-TYWFS)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The distance between user and device should be no less than 20cm.
Let's get start!
CONTENTS
Wi-Fi Module specification and basic information ..............................................1
Download and Install the App.............................................................................2
Activate APP.........................................................................................................3
Registration.........................................................................................................4
Login....................................................................................................................6
Add device........................................................................................................8
Air conditioner control.......................................................................................10
Account management........................................................................................29
Trouble Shooting...............................................................................31
1. Minimum specifications on a Smart phone:
Android 5.0 version or higher
IOS 9.0 version or higher
Wi-Fi Module specification and basic information
1
3. Wi-Fi module location and appearance in indoor unit
Open the front panel, the Wi-Fi module is nearby the electric box cover or on the panel.
RESET
SN:
Reset button
Connecting cable
2. Basic parameters for Wi-Fi module
2.400 - 2.500GHz
Protocol stack support
IEEE 802.11 b/g/n(channels 1-14)
Network frequency
Parameters
IPv4/IPv6/TCP/UDP/HTTPS/TLS/MulticastDNS
Security support WEP/WPA/WPA2/AES128
Details
Standards of WLAN
Network type support STA/AP/STA+AP
Download and Install the App
2
Smart Life
Note:
Please enable the permissions of Storage/Location/Camera for this APP when installing.
Otherwise it will have some problems when operating.
For Android smart phone
Method1: Please scan the QR code with a browser scanner, download and install the APP.
Method2: Open the Google "Play Store" on your smart phone and search "Smart Life",
download and install the APP.
For IOS smart phone
Method1: Please scan the QR code and follow the tips to get into "AppStore", download
and install the APP.
Method2: Open the Apple "AppStore" on your smart phone and search "Smart Life",
download and install the APP.
1. Launch the APP "Smart Life" on your smart phone.
3
Activate APP
2. Method1:Tap button "Scan" and scan the right Activate QR code
Method2: Tap "or Enter Activation Code" in bottom of the screen,
then enter the activate code and tap "CONFIRM".
Smart Life
Activate QR code and activation code
Note Without the QR code or activation code,
you can't active the APP and using it,
please keep them safe.
Scan
Scan the activation QR code
from instructions or device
or Enter Activation Code
or Enter Activation Code
CANCEL CONFIRM
******
The first time the app is used, it will need activating.
'$,=8.,
Registration
1.If you don't have any account please tap button "Register".
2.Read the Privacy Policy and tap "Agree".
4
3.Tap">" and choose the country.
4.Enter your phone number or e-mail address.
5.Tap the button "Obtain verification code".
Log in with existing account
Privacy Policy
we pay high attention to the privacy
of personal information. To fully
present how we collect and use your
personal information, we revised the
Privacy Policy in detail in compliance
with the latest laws and regulations.
By clicking Agree, you agree that you
have fully read, understood and
accepted all the content of the
revised Privacy policy. Please take
your time to read the Privacy Policy. If
you have any question, please
contact us at any time.
Privacy Policy
Disagree Agree
#
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Country Choosed
A
Afghanistan
Albania
Algeria
Angola
Argentina
Armenia
Australia
Search
Resister
China +86 >
138******** X enter your mobile phone number
or e-mail address here
Search the country or slide the
screen up/down to find
and choose the Country.
<<
I agree with Service Agreement and Policy
Register
Obtain verification code
Registration
6.Enter the verification code you received from phone message or e-mail.
7.Set the Password with 6-20 characters including characters and numbers.
8.Tap "Done".
5
Enter verification
code
Verification code is sent to your phone:
86-***********,Resend(55s)
* * * * * *
<
Set Password
6-20 characters for password, including character, numbers
******
<
Login
Login
Login
China +86 >
138********
<
I agree with Service Agreement and Policy
Log in
******
SMS verify and sign in Forgot password
1.Tap "Log in with existing account".
2.Enter your registered account and password.
3.Tap "Log in" button.
enter the password
enter your account here
Log in with existing account
Register
Done
/LYLQJ5RRP 0DVWHU%HGURRP
6HFRQG%HGURRP 'LQLQJ5RRP
.LWFKHQ 6WXG\5RRP 3RUFK
%DOFRQ\ .LGV5RRP &ORVHW
Login
The first time the APP is used, Create family is needed:
4.Tap "Create family".
5.Make name for the family.
6.Set the location.
7.Choose default rooms or add new rooms.
8.Tap "Done" and "Completed".
Turn on your smart life
Create family
Log out
#
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Family Name
<Add family Done
Family Location Set location >
Smart devices in rooms:
Living Room
Master Bedroom
Second Bedroom
Dining Room
Kitchen
Study Room
Add Room
You can change the room settings anytime
My home
choose the recommended room
or make a new room, then tap
Done.
Room Name
<Add Room Done
Recommended
*******
6
#
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Allow Smart Life to access this device's
location?
ALLOW ONLY WHILE IN USE
ALLOW ALL THE TIME
DENY
CANCEL CONFIRM
Note:
The app can open the map on your
phone and you can set the location
where you are.
Family created successfully
View family Completed
Login
7
Forgot the password
If you forgot the password, you can login as below:
(Only for phone number accounts)
1.Tap "SMS verify and sign in".
2.Enter your phone number and tap button "Obtain verification code".
3.Enter the verification code received by your phone.
Login
China +86 >
Mobile number/e-mail address
<
I agree with Service Agreement and Policy
Log in
Password
SMS verify and sign in Forgot password
SMS verify and sign in
China +86 >
138******** X
<
Obtain verification code
Enter verification
code
Verification code is sent to your phone:
86-***********,Resend(55s)
* * * * * *
<
Or you can reset the password as below:
1.Tap "Forgot password".
2.Enter your account(phone number or e-mail address) and tap button
"Obtain verification code".
3.Enter the verification code received by your phone or e-mail.
4.Set the new password and tap button "Done".
Login
China +86 >
Mobile number/e-mail address
<
I agree with Service Agreement and Policy
Log in
Password
SMS verify and sign in Forgot password
Forgot password
China +86 >
138******** X
<
Obtain verification code
Enter verification
code
Verification code is sent to your phone:
86-***********,Resend(55s)
* * * * * *
<
Set Password
6-20 characters for password, including character, numbers
******
<
Done
Ce manuel convient aux modèles suivants
1
Table des matières
