
PRODUCT IDENTIFICATION
6
MODEL # MFG # DESCRIPTION
AFE18-60A N/ A
Fossil Fuel Kit. The AFE18-60A control is d esigned for use where the indoor coil is located
above/d ownstream of a gas or fossil fuel furnace when used with a heat pump. It will operate
with sing le and two stage heat pumps and single and two stage furnaces. The AFE18-60A
control wi ll turn the he at pump unit off when the furnace is turned on. An anti-short cycle feature
initiates a 3 min ute timed off delay when the compressor goes off.
MODEL # MFG # DESCRIPTION
HANG21 N/ A
High Altitude Natural Gas Kit.
The kit is designed to convert 80% ga s furnace models fired at
20,000 Btu's per cell for higher altitudes. This kit is required when installing these furnaces
above their maximum rated altitude.
MODEL #
DM80SE0403A*
DM80SE0603A*
DM80SE0604B*
DM80SE0803B*
DM80SE0804B*
DM80SE0805C*
DM80SE1005C*
DM80SE1205D*
80% GAS FURNACES
DAIKIN 80% SINGLE STAGE GAS FURNACE, FOR INSTALLATION IN UPFLOW / HORIZONTAL
LEFT OR RIGHT. SILICON NITRIDE IGNITER. MULTISPEED ECM BLOWER MOTOR, STAINLESS
STEEL TUBULAR HEAT EXCHANGER. COMES IN 4 CHASSIS SIZES "A" = 14" , "B" = 17.5" , "C" =
21" , "D" = 24.5".
MODEL #
DC80SE0403A*
DC80SE0603A*
DC80SE0804B*
DC80SE1005C*
80% GAS FURNACES
DAIKIN DOWNFLOW MODELS WITH MULTISPEED ECM BLOWER MOTOR. STAINLESS STEEL
TUBULAR HEAT EXCHANGER. SILICON NITRIDE IGNITOR. CHASSIS SIZEZ "A" WIDTH = 14" ,
"B" WIDTH = 17.5" , "C" WIDTH = 21".
MODEL # MFG # DESCRIPTION
EFR01 P1221001
P1221002F
External Filter Rack Kit. For use with upflow furnace models. This kit is intended to
provide a location, external to the furnace casing, for installation of a permanent filter.
The rack is mounted over the indoor air blower compartment area of either side panel,
and provide filter retention as well as a location for attaching return air ductwork..
TK400 N/A
Twinning kit from Jackson Systems. Allows a single thermostat to control two
separate furnaces / HVAC units. Can be expanded to control four units. When twinning
cooling systems we recommend the use of coil freeze stats. (FSK01A) For use with
single stage PSC furnaces built with PCBBF145 control board
Twinning kit from Jackson Systems. Allows a single thermostat to control two
separate furnaces / HVAC units. Can be expanded to control four units. When twinning
cooling systems we recommend the use of coil freeze stats. (FSK01A) For use with
single stage furnaces built with PCBBF145 control board