Dahua PFH610V-IR Manuel utilisateur

Light-duty Protective Housing

User’s Manual

V1.0.2

ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD.

Legal Statement

Any or full contents of the user’s manual cannot be copied, transmitted, distributed or stored,

partially or wholly, by any means, without the prior written notice of ZHEJIANG DAHUA VISION

TECHNOLOGY CO.,LTD. (hereinafter “Dahua”).

Dahua or the third party may reserve the right of the software described in this user’s manual.

Without the prior written approval of the corresponding party, any person cannot copy, distribute,

amend, abstract, reverse compile, disassemble, decode, reverse engineering, rent, transfer or

sub-license the software.

Trademark

,, and are the trademarks or registered

trademarks of the Dahua in various jurisdictions.

HDMI logo, HDMI and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC. This product has been authorized by HDMI Licensing

LLC to use HDMI technology.

VGA is the trademark of IBM.

Windows logo and Windows are trademarks or registered trademarks of Microsoft.

Other trademarks and company names mentioned are the properties of their respective

owners.

About this Document

This document is for reference only. Please refer to the actual product for more details.

This document serves as a reference for multiple types of products, whose specific

operations won’t be enumerated. Please operate according to actual products.

The user shall undertake any losses resulting from violation of guidance in the document.

In case that PDF document cannot be opened, please upgrade the reading tool to the

latest version or use other mainstream reading tools.

This company reserves rights to revise any information in the document anytime; and the

revised contents will be added to the new version without prior announcement. Some

functions of the products may be slightly different before and after revision.

The document may include technically inaccurate contents, inconsistencies with product

functions and operations, or misprint. Final explanations of the company shall prevail.

Preface

Overview

This document mainly introduces installation of light-duty protective housing.

Symbol Definition

The following symbols may appear in the document. Please refer to the table below for the

respective definition.

Signal Words

Meaning

DANGER

Indicates a high potential hazard which, if not avoided, will result

in death or serious injury.

WARNING

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

CAUTION

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, lower performance, or unpredictable

result.

TIPS

Provides methods to help you solve a problem or save you time.

NOTE

Provides additional information as the emphasis and supplement

to the text.

Revision Record

No.

Version No.

Revision Content

Release Date

V1.0.0

First release

2017.9.30

V1.0.1

Add statement: Regarding a camera with

RS485 control function, “PTZ Setting” shall be

adjusted to “Default” status.

2017.12.10

V1.0.2

1. Integrate with anti-corrosion bracket;

2. Modify some dimensional drawings;

3. Modify technical specification parameters.

2018.01.20

III

Important Safeguards and Warnings

The following description is the correct application method of the device. Please read the

manual carefully before use, in order to prevent danger and property loss. Strictly conform to

the manual during application and keep it properly after reading.

Please install it at stable places, and prevent it from falling.

Use the device only within rated input and output range.

Please don’t dismantle the device arbitrarily.

The product shall use electric wires (power wires) recommended by this area, which shall

be used within its rated specification.

Please use power supply that meets SELV (safety extra low voltage) requirements, and

supply power with rated voltage that conforms to Limited Power Source in IEC60950-1. For

specific power supply requirements, please refer to device labels.

If power plug or appliance coupler is a disconnecting device, please ensure its convenient

operation.

About this Document

This document is for reference only. Please refer to the actual product for more details.

This document serves as a reference for multiple types of products, whose specific

operations won’t be enumerated. Please operate according to actual products.

The user shall undertake any losses resulting from violation of guidance in the document.

In case that PDF document cannot be opened, please upgrade the reading tool to the

latest version or use other mainstream reading tools.

This company reserves rights to revise any information in the document anytime; and the

revised contents will be added to the new version without prior announcement. Some

functions of the products may be slightly different before and after revision.

The document may include technically inaccurate contents, inconsistencies with product

functions and operations, or misprint. Final explanations of the company shall prevail.

Table of Contents

Legal Statement......................................................................................................................................... I

Preface....................................................................................................................................................... II

Important Safeguards and Warnings.................................................................................................... III

1 Product Overview.................................................................................................................................. 1

1.1 Product Feature ............................................................................................................................ 1

1.2 Product Size.................................................................................................................................. 1

2 Installation Guide of Housing............................................................................................................ 3

2.1 Open and Lock the Housing......................................................................................................... 3

2.2 Control and Wiring Instruction ...................................................................................................... 4

2.3 Install Camera............................................................................................................................. 10

2.4 Operating Control Instruction...................................................................................................... 10

3 Installation Guide of Bracket ............................................................................................................. 12

3.1 Install General Bracket................................................................................................................ 12

3.2 Install Special Bracket................................................................................................................. 12

3.3 Bracket Model............................................................................................................................. 13

Technical Specification.......................................................................................................................... 15

1Product Overview

Light-duty protective housing provides all-weather protection for cameras and lens, and

ensures their normal work in severe environment such as high temperature, low temperature,

rain and snow. Support to install cameras and lens of various sizes; boast a built-in adjustable

camera fixing plate and relatively high protection level.

It is hereinafter referred to as “housing”.

1.1 Product Feature

Brand-new side cover design facilitates device installation and debugging.

Aluminium shell owns fully sealed design and reaches IP66/IP67 protection level.

Built-in heating and cooling system guarantees stable operation.

Windows adopt waterproof films, so as to reduce the effect of weather on the camera.

1～100m infrared ray provides auxiliary ray of light.

Support remote control of LED and windshield wiper.

1.2 Product Size

Figure 1-1 DH-PFH610N and DH-PFH610N-H (unit: mm)

Figure 1-2 DH-PFH610N-IR/LED, DH-PFH610A-IR, DH-PFH610A and DH-PFH610A-H (unit: mm)

Figure 1-3 DH-PFH610N-W and DH-PFH610N-IR-W (unit: mm)

2Installation Guide of Housing

2.1 Open and Lock the Housing

Open or lock the housing with two M6 screws at the side and internal hexagonal wrench (5.0mm),

as shown in Figure 2-1.

Figure 2-1

Before closing the cover, please inspect whether waterproof ring of the shell is correctly

installed in place, as shown in Figure 2-2. Otherwise, waterproof performance of the housing

may be affected.

Figure 2-2

2.2 Control and Wiring Instruction

With LED/wiper module, there are 3 control modes as shown in

Mode

Applicable IPC Camera Type

Wiring Instruction

Remote 1

Camera with RS485 control

function.

Control LED and wiper status at WEB

interface. Specific wiring of IPC is shown in

Figure 2-3 Wiring Diagram of IPC Interface

(Remote Mode 1).

Remote 2

Camera without RS485 control

function; “N/C”interface of the

camera satisfies “LED” and

“WIPER” connection.

Control LED and wiper switch through

camera alarm option. Specific wiring is

shown in Figure 2-4 Wiring Diagram of IPC

Interface (Remote Mode 2).

Routine

Camera without RS485 control

function; “N/C”interface of the

camera cannot satisfy “LED”

and “WIPER” connection at the

same time.

Control wiper switch through camera alarm,

and control LED switch through LED

photosensitive unit. Specific wiring of IPC is

shown in Figure 2-5 Wiring Diagram of IPC

Interface (Routine Mode).

Table 2-1 and Table 2-2.

Mode

Applicable IPC Camera Type

Wiring Instruction

Remote 1

Camera with RS485 control

function.

Control LED and wiper status at WEB

interface. Specific wiring of IPC is shown in

Figure 2-3 Wiring Diagram of IPC Interface

(Remote Mode 1).

Remote 2

Camera without RS485 control

function; “N/C” interface of the

camera satisfies “LED” and

“WIPER” connection.

Control LED and wiper switch through camera

alarm option. Specific wiring is shown in

Figure 2-4 Wiring Diagram of IPC Interface

(Remote Mode 2).

Routine

Camera without RS485 control

function; “N/C” interface of the

camera cannot satisfy “LED”

and “WIPER” connection at the

same time.

Control wiper switch through camera alarm,

and control LED switch through LED

photosensitive unit. Specific wiring of IPC is

shown in Figure 2-5 Wiring Diagram of IPC

Interface (Routine Mode).

Table 2-1

Mode

Applicable CVI Camera Type

Wiring Instruction

Remote

Camera with RS485 control

function.

Control LED and wiper status atWEB interface.

Specific wiring is shown in Figure 2-6 Wiring

Diagram of CVI Interface (Remote Mode 1).

Routine

Camera without RS485 control

function.

Control wiper switch through camera alarm,

and control LED switch through LED

photosensitive unit. Specific wiring is shown in

Figure 2-7 Wiring Diagram of CVI Interface

(Routine Mode).

Table 2-2

Camera with RS485 control function means that “Peripheral Management” menu at WEB

interface has “External Light Setting” and “Wiper Setting”.

Choose corresponding control mode according to different camera types.

“N/C”, “NO/C” and “OUT/G” interfaces of the camera have the same functions. Different types

of devices display in a different way.

Regarding a camera with RS485 control function, “PTZ Setting” shall be adjusted to “Default”

status.

Protective housing of white light doesn’t support remote mode 2.

Please don’t connect NO/C or OUT/G interface with IR/G interface, or the IR light will be damaged.

Figure 2-3 Wiring Diagram of IPC Interface (Remote Mode 1)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Dahua Caméra de sécurité

Dahua

Dahua HAC-HFW2200EP Manuel utilisateur

Dahua

Dahua IPC-HFW2831T-ZS-27135-S2 Manuel utilisateur

Dahua

Dahua SD49225-HC-LA Manuel utilisateur

Dahua

Dahua H Series Manuel utilisateur

Dahua

Dahua HFW2100R-VF Manuel utilisateur

Dahua

Dahua Active Deterrence Eyeball Manuel utilisateur

Dahua

Dahua 49925TNI Manuel utilisateur

Dahua

Dahua IPC-EBW81230 Guide d'installation et d'utilisation

Dahua

Dahua HAC-HFW1200D Manuel utilisateur

Dahua

Dahua A83ABBZ Manuel utilisateur

Dahua

Dahua IR High Speed Dome Camera Manuel utilisateur

Dahua

Dahua HAC-HDBW1400R-Z-2712 Manuel utilisateur

Dahua

Dahua F Series Manuel utilisateur

Dahua

Dahua DH-IPC-HFW1431T1P-ZS-S4 Manuel utilisateur

Dahua

Dahua CA-DBW481BP Manuel utilisateur

Dahua

Dahua DH-IPC-HFW2100P Manuel utilisateur

Dahua

Dahua DH-SP-PIXX Manuel utilisateur

Dahua

Dahua DH-IPC-PFW8800N-A180 Manuel utilisateur

Dahua

Dahua DH-IPC-HDBW4421EP-0280B Manuel utilisateur

Dahua

Dahua IPC-HDBW1435E-W-0360B Manuel utilisateur

Dahua

Dahua DH-IPC-1200SP-W Manuel utilisateur

Dahua

Dahua F Series Manuel utilisateur

Dahua

Dahua 2M HD IP Manuel utilisateur

Dahua

Dahua F Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur