Dahua IPC-KW10 Manuel utilisateur

IP Camera User’s Manual

Version 1.0.0

Zhejiang Dahua Technology CO., TD

Welcome

Thank you for purchasing our network camera!

This user’s manual is designed to be a reference tool for your system.

Please read the following safeguard and warnings carefully before you use this series product!

Please keep this user’s manual well for future reference!

Important Safeguards and Warnings

1．

．．

．Electrical safety

All installation and operation here should conform to your local electrical safety codes.

The power shall conform to the requirement in the SE V (Safety Extra ow Voltage) and the imited

power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please

note: Do not connect two power supplying sources to the device at the same time; it may result

in device damage!

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling

or installation.

We are not liable for any problems caused by unauthorized modification or attempted repair.

2．

．．

．Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

3．

．．

．Installation

Do not apply power to the camera before completing installation.

Please install the proper power cut-off device during the installation connection.

Always follow the instruction guide the manufacturer recommended.

4．

．．

．Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers.

We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．

．．

．Environment

This series network camera should be installed in a cool, dry place away from direct sunlight,

inflammable, explosive substances and etc.

Please keep it away from the electromagnetic radiation object and environment.

Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.

Otherwise it may result in CCD (CMOS) optical component damage.

Please keep the sound ventilation.

Do not allow the water and other liquid falling into the camera.

Thunder-proof device is recommended to be adopted to better prevent thunder.

The grounding studs of the product are recommended to be grounded to further enhance the reliability

of the camera.

6. Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance

work.

iii

Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens

surface.

Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to

dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the

device.

Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.

Dome enclosure is the optical component, do not touch the enclosure when you are installing the

device or clean the enclosure when you are doing maintenance work. Please use professional optical

clean method to clean the enclosure. Improper enclosure clean method (such as use cloth) may result

in poor IR effect of camera with IR function.

7. Accessories

Be sure to use all the accessories recommended by manufacturer.

Before installation, please open the package and check all the components are included.

Contact your local retailer ASAP if something is broken in your package.

Accessory Name Amount

Network Camera 1

Quick Start Guide 1

Installation Accessories Bag 1

CD 1

Warranty Card and Certificate 1

Table of Contents

General Introduction .................................................................................................................. 1

1.1

Overview........................................................................................................................ 1

1.2

Features......................................................................................................................... 1

1.3

Specifications................................................................................................................ 2

1.3.1

Performance........................................................................................................... 2

Framework................................................................................................................................... 5

2.1

Device Components..................................................................................................... 5

2.2

Dimensions.................................................................................................................... 6

2.3

Bidirectional talk............................................................................................................ 7

2.3.1

Device-end to PC-end .......................................................................................... 7

2.3.2

PC-end to the Device-end.................................................................................... 7

Device Installation ...................................................................................................................... 8

Quick Configuration Tool......................................................................................................... 10

Overview...................................................................................................................... 10

Operation ..................................................................................................................... 10

Web Operation.......................................................................................................................... 12

5.1

Network Connection................................................................................................... 12

5.2

FAQ ............................................................................................................................................ 14

Appendix Toxic or Hazardous Materials or Elements ............................................................... 16

1 General Introducti

General IntroductiGeneral Introducti

General Introduction

on on

1.1

1.11.1

1.1 Overview

Overview Overview

Overview

This series network camera integrates the traditional camera and network video technology. It adopts

video data collection, transmission together. It can connect to the network directly without any auxiliary

device.

This series product uses standard H.264 video compression technology, G.711a audio compression

technology and etc, which maximally guarantees the video quality.

It supports PIR function to detect human body movement. It can activate the white light at the same to

enable the record function at night. This series product supports real-time listening function when it is

in real-time monitor mode. It supports dual-way bidirectional talk function.

It can be used alone or used in a network area. When it is used lonely, you can connect it to the

network and then use a network client-end. Due to its multiple functions and various uses, this series

network camera is widely used in many environments such as home, office, bank, road monitor and

etc.

1.2

1.21.2

1.2 Feature

FeatureFeature

Features

User

Management

 Different user rights for each group, one user belongs to one group.

 The user right shall not exceed the group right.

Data

transmission

 Wire network data transmission via the Ethernet port.

 Wireless product series supports WIFI wireless network data transmission.

Storage

Function

 Support central server backup function in accordance with your configuration and

setup in alarm or schedule setting

 Support record via Web and the recorded file are storage in the client-end PC.

 Support Micro SD card storage (This function is optional. For some series

product only.), alarm record or snapshot storage.

 Support network storage function such as FTP.

Alarm

Function

 Real-time respond to external on-off alarm input, and video detect (This function

is optional. For some series product only.)as user pre-defined activation setup

and generate corresponding message in screen and audio prompt(allow user to

pre-record audio file)

 Real-time video detect: motion detect, camera masking, PIR human body

movement detect.

Network

Monitor

 Network camera supports one-channel video data transmit to network terminal

and then decode. Delay is within 270ms (network bandwidth support needed)

 Max supports 20 connections. Max support 24Mbps output band width. The new

query may fail if it has reached the threshold.

 Adopt the following video transmission protocol: HTTP, TCP, UDP, MU TICAST,

RTP/RTCP, RTSP and etc.

 Support web access.

Network

Management

 Realize network camera configuration and management via Ethernet.

 Support device management via web or client-end.

 Support various network protocols.

Power  External power adapter DC12V.

PoE

 Support Power over Ethernet. Conform to IEEE802.3af standard.

 Connect the device to the switch or the router that supports the PoE function to

realize the network power supply.

Warning

！

！！

！

Do not connect these two power supplying sources to the device at the same

time; it may result in device damage!

Assistant

Function

 og function. Support system resource information and running status real-time

display.

 Backlight compensation: screen auto split to realize backlight compensation to

adjust the bright.

 Support video watermark function to avoid vicious video modification.

 Support picture parameter setup such as electronic shutter and gain setup.

 Support motion detect function.

 Support dual-stream, ACF.

 Built-in microphone and speaker (This function is optional. For some series

product only.).

 Support PIR human body movement detect.

 Support white light alarm function.

1.3

1.31.3

1.3 Specification

SpecificationSpecification

Specifications

1.3.1 Performance

Please refer to the following sheet for product performance specification.

Model

Parameter IPC-KW10 IPC-KW10W IPC-KW12 IPC-KW12W

Main Processor High performance DSP

OS Embedded INUX

System

Resources

Support real-time network monitor, local record, and remote operation

at the same time.

User Interface Remote operation interface such as WEB, DSS, PSS.

System

System Status Bit stream statistics, log, and software version.

Image Sensor 1/4-inch CMOS

Pixel 1280(H)*720(V)

Gain Control Fixed/Auto

White Balance Manual/Auto

B C On/Off

Exposure Mode

Manual/Auto

PA : It ranges from 1/3 to 1/10000.

NTSC: It ranges from 1/4 to 1/10000.

Video

Compression

Standard

H.264/H.264B/MJPEG

Video Frame

Rate

PA :

Main stream(1280*720@25fps)

extra stream(704*576@25fps)

NTSC:

Main stream(1280*720@30fps)

extra stream(704*480@30fps)

Video Parameter

Video Bit Rate H.264: 16Kbps-8192Kbps

MJPEG is adjustable and bit rate is adjustable

Support customized setup.

Video Flip Support mirror.

Support flip function.

Snapshot Max 1f/s snapshot. File extension name is JPEG.

Privacy Mask Supports max 4 privacy mask zones

Video Setup Support parameter setup such as bright, contrast.

Video

Information Channel title, time title, motion detect, camera masking.

ens 3.6mm. Fixed focus.

Angle of view: 70°(H

）

*51.5°(V)

ens Interface M12. ens is the default accessories

Audio Bit Stream

One-way Dual-way

Audio

Input/Output Built-in microphone Built-in microphone and speaker

Audio Bit Rate 8/16kbps 16bit

Audio

Compression

Standard

G.711A/G.711Mu/PCM

Motion Detect

396 (18*22) detection zones

Activation event: video storage, image snapshot, log, email SMTP

function and etc.

Video

Camera Masking

Activation event: alarm device, audio/video storage, image snapshot,

log, email SMTP function and etc.

Record Priority Support remote and local record

SD Card Storage

N/A Support

Record

and

Backup

Storage

Management Support display network and local storage status

Wire Network 1-channel wire Ethernet port, 10/100 Base-T Ethernet

Wireless

Network N/A Support N/A Support

Network Protocol

Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP,UDP, RTCP,

SMTP, FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour,

SNMP.

Network

Remote

Operation

IR light

Monitor, system setup, file download, log information, maintenance ,

upgrade and etc.

Compensation

ight

IR distance is 10M.

PIR Human Body

Movement Detect

N/A Support

AUX

Port

WPS N/A

Click one

button to

enable WIFI

connection

N/A

Click one

button to

enable WIFI

connection

Power DC 12V

Power

Consumption 3.4W MAX 5.4W MAX 3.4W MAX 5.4W MAX

Working

Temperature -30

℃

~+60

℃

-30

℃

~+55

℃

-30

℃

~+60

℃

-30

℃

~+55

℃

Working

Humidify

≤

95%

Dimensions(mm)

66.6*99.5*131.2

Weight 200g

（

Excluding box

）

General Parameter

Installation Installation with the bracket.

2 Framework

FrameworkFramework

Framework

2.1

2.12.1

2.1 Device Components

Device Components Device Components

Device Components

You can refer to the following figure for component information. See Figure 2-1

Figure 2-1 Component

Please refer to the following sheet for detailed information.

SN Port Name Indicator Connector Note

1 Power indicator

light POWER /

 When system boots up–Green

light becomes on.

 When system is upgrading –

Green light flashes. Interval is

0.5s.

 When system is alarming–

Green light flashes. Interval is

0.2s.

2 Network

indicator light NET /

 Wire network connection-Red

light is on.

 Wireless network connection-

Green light is on.

3 PIR sensor PIR /

Passive IR motion detect port. It

can detect the IR object movement

(such as human body or other

heating object).

Note:

Only certain series have this

function.

Autres manuels pour IPC-KW10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Dahua Caméra IP

Dahua

Dahua HAC-HDBW SERIES Manuel utilisateur

Dahua

Dahua HAC-HDW2221R-Z Manuel utilisateur

Dahua

Dahua HAC-HDW1220R Manuel utilisateur

Dahua

Dahua ECA3A1 Manuel utilisateur

Dahua

Dahua HAC-HFW Series Manuel utilisateur

Dahua

Dahua DH-IPC-HDW2100P Manuel utilisateur

Dahua

Dahua K6 Manuel utilisateur

Dahua

Dahua IMOU Manuel utilisateur

Dahua

Dahua IPC-HFW5100C Manuel utilisateur

Dahua

Dahua F Series Manuel utilisateur

Dahua

Dahua IPC-HFW2100P Series Manuel utilisateur

Dahua

Dahua DH-IPC-HFW1320SP-W Series Manuel utilisateur

Dahua

Dahua DH-HAC-HFW3220EN-Z Manuel utilisateur

Dahua

Dahua CA-FW480P Manuel utilisateur

Dahua

Dahua F Series DHI-ITC237-PU1B-IR Manuel utilisateur

Dahua

Dahua C series Manuel utilisateur

Dahua

Dahua DH-HAC-HFW1100RP-VF Manuel utilisateur

Dahua

Dahua ITC237-PW1A-IRZ Manuel utilisateur

Dahua

Dahua IPC-HF3500 Series Manuel utilisateur

Dahua

Dahua IPC-HDW2200S Manuel utilisateur

Dahua

Dahua HDC-HFW3200C Manuel utilisateur

Manuels Caméra IP populaires d'autres marques

FLIR

FLIR Exx series Manuel utilisateur

Avigilon

Avigilon H4A-BO1-IR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuel utilisateur

ShareTech

ShareTech AV1 Manuel utilisateur

Ezviz

Ezviz C6C Manuel utilisateur

Melchioni

Melchioni UCAM 2015 Manuel utilisateur

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuel utilisateur

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuel utilisateur

Mitel

Mitel 6800i Series Manuel de service

Vitek

Vitek VTC-IR403-212NP Manuel utilisateur

THOMSON

THOMSON DSC - 323W Manuel utilisateur

AVer

AVer FB2027 Manuel utilisateur

ENFORCER

ENFORCER EV-T5105-N2SQ Manuel utilisateur

Wansview

Wansview NC543 Manuel utilisateur

Eneo

Eneo MCB-64A0003M0A Manuel utilisateur

deView electronics

deView electronics CBDNI36F Manuel utilisateur

Swann

Swann SwannEye Manuel utilisateur

LevelOne

LevelOne IP CamSecure Manuel utilisateur