Dahua ARC5408C-W Manuel utilisateur
Network Video Alarm Controller
Quick Start Guide
Version 1.0.0
i
Table of Contents
1 FEATURES AND SPECIFICATIONS...............................................................................1
1.1 Overview ....................................................................................................................1
1.2 Features.....................................................................................................................1
1.3 System Composition................................................................................................1
2 INSTALLATION....................................................................................................................3
2.1 ARC5408B Series....................................................................................................3
2.2 ARC5408C Series....................................................................................................5
2.3 Wiring.......................................................................................................................10
3 WEB Loginand Logout....................................................................................................14
3.1 Login........................................................................................................................14
3.2 Logout......................................................................................................................14
4 Arm/Disarm........................................................................................................................ 15
4.1 Arm/Disarm.............................................................................................................15
4.2 Add and Delete Wireless Device.........................................................................18
4.3 Zone Config ............................................................................................................19
4.4 EmergencyAlarm Config .....................................................................................22
4.5 Siren and Alarm Output Config ...........................................................................23
4.6 Failure Config.........................................................................................................25
4.7 Video Alarm Config ...............................................................................................27
4.8 Event Report Config..............................................................................................29
4.9 Event Info View......................................................................................................31
4.10 Network Config ....................................................................................................31
5 Wireless Alarm Programming Keypad Operation........................................................ 35
5.1 Key...........................................................................................................................35
5.2 Wireless Match Code............................................................................................ 36
5.3 Before Operation ...................................................................................................36
5.4 Arm...........................................................................................................................39
5.5 Disarm.....................................................................................................................39
5.6 Bypass Isolation.....................................................................................................39
5.7 Zone Setup .............................................................................................................40
5.8 Other Setup ............................................................................................................41
5.9 COM Setup.............................................................................................................42
5.10 Output Setup ........................................................................................................43
5.11 View System Status ............................................................................................44
Appendix1Contact ID Event Code....................................................................................47
ii
Welcome
Thank you for purchasing our network video alarm controller!
This quick start guide will help you become familiar with our network video alarm controller in a
very short time.
Before installation and operation, please read the following safeguard and warning carefully!
Model
ARC5408B and ARC5408C
iii
Important Safeguard and Warning
1．Electrical safety
All installation and operation here should conformto your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for all the fires or electric shock caused by improper
handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Keep upwards. Handle with care.
Do not apply power to the alarmcontroller before completing installation.
Do not place objects on the alarm controller.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The alarm controller should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
This series product shallbe transported, storage and used in the environment ranging from -10℃
to 55 ℃.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
Before Start
About Alarm System
For the alarm system consists of the network alarm controller, though it has stable and reliable
performance, it may become null in the following situations:
The protection zone the intruder entering has not enabled the arm function or the intruder
has enough knowledge to disable the system.
The siren device installation position is not right; it does not have the warning function.
The detector is null when there is an alarm outage and etc.
The detector is not in the proper position and can not detect the corresponding zone.
System can not generate an alarm when there is something wrong with the alarm signal
transmission system (the service is disabled, there is malicious attack and etc).
iv
The device is null resulting from non-schedule maintenance of the alarm system.
About Installation Notice
The installation engineers are recommended to check the system regularly such as once a
month. It is to guarantee systemlong-termstable operation.
The installation engineers are recommended to test the system regularly such as once a
week.
Please arrange some training classes for the end-user. It is to keep them familiar with the
system.
System Test Notice
After the installation, you can connect to the AC/DC power to test.
You can test the all functions of the alarm controller after you complete all programming
work.
1
1 FEATURES AND SPECIFICATIONS
1.1 Overview
This series product integrates on-off alarminput and output, and video processing as one multi-
functional video alarm controller. It supports protection zone alarm, wireless remote arm/disarm,
keypad arm/disarm, emergency alarm, video preview authority management, alarm can trigger
pop-up video for you to recheck, video alarm and etc. It can be used in many environments such
as bank, school, store, residential district. It can perfectly work with the alarm and surveillance
solutions when there is an alarm operation and management platform.
1.2 Features
This series product has the following features:
8-ch programming wired zone, 32-ch wireless zone, 1-ch relay control output can extend to
9-ch output.
4-ch 720P analog HDCVI or 4-ch 720Pnetwork video input, may achieve alarm video review
and motion, video loss, video tampering intelligent analytic, meantime support video local
storage and playback.
1-ch audio input, 1-ch talk input and A/V reuse, 1-ch audio output and talk output reuse.
8-ch wireless alarm programming keypad or 8-ch wires alarm programming keypad, 16
wireless remote controls, may use keypad, remote control, smart phone APP to arm/disarm.
Set plan to auto complete arm/disarm.
Alarm event support report in SMS (-C/-E/-CW/-EWmodels)
Main power outage detection and alternate power in place, low battery detection.
Max of 1024 alarm events and failure event records plus 512 system logs.
100 web users, 23 keypad users, 3-level right management: 1 administrator, 1 installer, 21
operator.
1-ch 12V DC 1A AUX output and 2-ch 12V DC/500mA AUX output (1-ch controllable, used
in siren output)
2-ch RS485, 1-ch extension alarm output (i.e. ARM708), 1-ch alarm programming keypad.
1-ch USB and 1-ch 2.5 inch Sata hard disk.
Multiple backup alarm info transmission channel, support PSTN public tel network, TCP/IP
network, 3G network.
2-ch call center, 2-ch network call center (auto registration, static IP).
1.3 SystemComposition
Video Video Alarm Controller and camera, detector, keypad, siren, audio device, PSTN and
monitor, WEB client form a comprehensive linkage alarm system. The system basic connection
figure is in Figure 1- 1.
2
Figure 1- 1
3
2 INSTALLATION
2.1 ARC5408BSeries
2.1.1 Appearance
Video alarm controller appearance is in Figure 2-1.
Figure 2-1
2.1.2 Battery and HDD Installation
To install battery:
Step 1. Tie the two lines symmetrically and pull through pedestal, see Figure 2-2.
Figure 2-2
Step 2. Place battery on the tied line.Tie the battery tightly via the lines, cut the extra part of lines.
Step 3. Insert battery and lines into battery port on device, see Figure 2-3.
4
Figure 2-3
2.1.3 Install HDD
To install HDD:
Step 1. Please use 2.5 inch HDD, fix it on pedestalwith screwdriver.
Step 2. Insert HDD port on motherboard, see Figure 2-4.
Figure 2-4
2.1.4 Wall Mount
The device supports wall mount and desktop placement.
To mount on wall:
Step 1. Open device package, take out plastic expansion bolt and self-tapping screw.
5
Step 2. Dig two holes on wall with distance of 184mm in between. Insert the plastic expansion
bolt and fasten self-tapping screw.
Step 3. Hand the device on the screw.
Figure 2-5
2.2 ARC5408CSeries
2.2.1 Appearance
Video alarm controller appearance is in Figure 2-6.
Figure 2-6
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Dahua Contrôleurs
Dahua
Dahua UTC Manuel utilisateur
Dahua
Dahua DHI-ARC3008C Manuel utilisateur
Dahua
Dahua DHI-VTO1210C-X Manuel utilisateur
Dahua
Dahua DHL460UTS-E Manuel utilisateur
Dahua
Dahua DHI-ASC1204B Manuel utilisateur
Dahua
Dahua DHI-ASC1204C Manuel utilisateur
Dahua
Dahua DHI-ARC3008C Manuel utilisateur
Dahua
Dahua ASC1204C-S Manuel utilisateur
Dahua
Dahua VI0401HD-DC3000 Manuel utilisateur
Dahua
Dahua ASC1202C-D Manuel utilisateur
