DAHAO BECS-A15 Manuel utilisateur

刺绣机电脑

Computerized Embroidery Machine Controller

BECS-A15

（General Part）

Version：2019-03

操作手册

OWNER’S MANUAL

http://www.dahaobj.com/en/sh.asp

Contents

II Owner’s Manual of BECS- A15 Computerized Control System

Contents

Chapter 1 General Information.............................. 1

1.1 Warnings and Cautions...................................................................................1

1.2 Main Features.................................................................................................3

1.3 Technical Specifications.................................................................................6

Chapter 2 Embroidery Guide ............................... 7

2.1 Structure and Usage Instruction of Control Panel..........................................7

2.2 Instruction of the Main Interface....................................................................8

2.3 Basic Procedure of Embroidery ...................................................................15

2.4 Normal Embroidery, Returning and Patching..............................................19

2.5 Embroidery Operation..................................................................................19

2.6 Thread-Breakage Detection..........................................................................19

2.7 Working Status .............................................................................................20

Chapter 3 U Disk Management............................. 22

3.1 Select U Disk................................................................................................22

3.2 Pattern Preview.............................................................................................24

3.3 Pattern Input.................................................................................................25

3.4 Directory Operation......................................................................................26

3.5 Formatting U Disk........................................................................................26

3.6 Delete Objects from U Disk (including pattern file and directory) .............27

3.7 Create a New Directory in the Current Directory........................................28

Chapter 4 Common Parameters and Color-Changing Order ...... 29

4.1 Settings of Common Parameters..................................................................29

Contents

Owner’s Manual of BECS- A15 Computerized Control System III

4.1.1. Settings of X-Y Scale............................................................................................30

4.1.2. Settings of Rotate Angle........................................................................................31

4.1.3. Pattern Direction ...................................................................................................32

4.1.4. Prior Mode.............................................................................................................32

4.1.5. Rep. Mode.............................................................................................................32

4.1.6. Rep. Order.............................................................................................................32

4.1.7. X-Y Rep. Times.....................................................................................................33

4.1.8. X-Y Rep. Interval..................................................................................................33

4.2 Settings of Color-changing Order................................................................33

4.2.1. Color-changing Interface.......................................................................................33

4.2.2. Settings of Color-Changing Order ........................................................................35

4.2.3. Set Needle Bar Color.............................................................................................35

Chapter 5 Settings of Embroidery Parameters ................. 37

5.1 Procedure for Setting General Parameters...................................................38

5.2 Instruction on Some Functions within General Parameters........................ 39

5.2.1. Cyclic Embroidery Function.................................................................................39

5.2.2. Brake Adjustment (A Must for New Machine).....................................................39

Chapter 6 Memory Pattern Management...................... 40

6.1 Memory Pattern Management Interface and Other Memory Pattern

Operation Interfaces.............................................................................................40

6.2 Select Pattern for Embroidery ..................................................................... 42

6.3 Memory Pattern Preview.............................................................................42

6.4 Pattern Output..............................................................................................44

6.5 Copy the Memory Pattern............................................................................46

Contents

IV Owner’s Manual of BECS- A15 Computerized Control System

6.6 Create Outline Pattern..................................................................................48

6.7 Create High-speed Pattern............................................................................48

6.8 Divide Pattern...............................................................................................48

6.9 Create Parameter Pattern..............................................................................49

6.10 Mosaic Pattern............................................................................................50

6.11 Create Combined Pattern............................................................................51

6.12 Satin StitchAdjustment..............................................................................54

Chapter 7 Letter Pattern Operation.......................... 55

7.1 Enter Main Interface for Letter Embroidery................................................55

7.2 Input Letter String for Embroidery ..............................................................55

7.3 Adjust Letter Pattern.....................................................................................56

7.4 Save Letter Pattern .......................................................................................60

Chapter 8 Assistant Operation ............................. 62

8.1 Frame Selection............................................................................................62

8.2 Clear XY Displacement................................................................................63

8.3 Positioning Idling.........................................................................................63

8.3.1. Low Speed Idling Forward....................................................................................63

8.3.2. Low Speed Idling Backward.................................................................................64

8.3.3. High Speed Idling Forward...................................................................................64

8.3.4. Go to Next Color...................................................................................................64

Chapter 9 Other Functions ................................ 65

9.1 Statistics........................................................................................................65

9.2 Set Frame Origin..........................................................................................67

Contents

Owner’s Manual of BECS- A15 Computerized Control System V

9.3 Language......................................................................................................68

9.4 Machine Information...................................................................................68

9.5 Machine Debugging.....................................................................................69

9.6 Date and Time.............................................................................................. 70

9.7 Touch Screen Correction .............................................................................70

Chapter 10 About JF Sequin Embroidery ................. 72

10.1 Brief of Sequin Embroidery ......................................................................72

10.2 Embroidery Procedure of Sequin .............................................................. 73

10.3 Input Sequin Design .................................................................................. 73

10.4 Edit Sequin Design.................................................................................... 74

10.5 Setting of Multi-Sequin Embroidery Parameters...................................... 79

10.6 Manual Operation of Sequin Embroidery .................................................81

10.7 Debugging Multi-Sequin Embroidery.......................................................81

10.8 Sequin Mending.........................................................................................82

Chapter 11 Operation of Zigzag Embroidery ............. 83

11.1 Functions....................................................................................................83

11.2 Key Technical Indexes...............................................................................83

11.3 Procedure of Zigzag Embroidery............................................................... 83

11.4 Related Parameter and Setting Mode ........................................................83

11.5 Relative Operations of Zigzag Embroidery............................................... 85

11.5.1. Shift between Flat Embroidery Position and Zigzag Embroidery Position ........85

11.5.2. M Axis Operation of Zigzag Embroidery............................................................87

Contents

VI Owner’s Manual of BECS- A15 Computerized Control System

Chapter 12 Taping Embroidery.......................... 89

12.1 Function Introductions ...............................................................................89

12.2 Main Technical Specification.....................................................................89

12.3 Parameters and setting................................................................................89

12.4 Relative Operations of Special Embroidery...............................................91

12.4.1. Shift between Flat Stitch Head and Special Head...............................................91

12.4.2. M Axis Operation of Special Embroidery...........................................................92

12.4.3. Operations of Clamp Foot...................................................................................93

12.5 Debugging Special Embroidery.................................................................93

12.6 Steps on Special Embroidery .....................................................................94

12.7 Mechanical Category and Driving Mode Selection for Special Embroidery

Machines...............................................................................................................94

Chapter 13 Online Update of Main Software .................. 96

Chapter 14 Update of Software in Peripheral Board ............ 99

Appendix 1 Parameter List ............................... 103

Appendix 2 Directions of U Disk Operation ................. 115

Appendix 3 Automatic Position Limitation Function Instructions for

Apparel Embroidery .................................... 116

Appendix 4 A15 Controller Operation Quick Guide ........... 122

There will be no further notice in case of any change of specifications.

Chapter 1 General Information

Owner’s Manual of BECS- A15 Computerized Control System 1

Chapter 1 General Information

Thank you for using Dahao Computerized Control System for Embroidery Machine.

Please read this manual carefully so as to operate the machine correctly and effectively.

Besides that, you should keep this manual properly for future use.

1.1 Warnings and Cautions

In order to avoid fire, electrical shock or unpredicted injuries, you should follow the listed

safety rules.

Matters forAttention on Usage

Danger

During the operation, do not try to open the machine box. The high voltage

contained in some parts is deadly. The rotating parts may cause serious injury.

Forbidden Don't expose the machine to humidity gas, poisonous gas, water, and dust.

Forbidden Don’t store or operate the machine in the vibration area, which may cause trouble

to the machine.

Attention Please abide all the warnings and safety requirements to ensure the security.

Attention LCD screen is fragile. Do not use the hard or sharp item to click the screen.

Attention Please insert U disk correctly and don’t force it in, otherwise, USB interface or U

disk may get damaged

Attention

We will add appendix if necessary. If there is any difference between the manual

and appendix, the content in the appendix shall take precedence.

Matters forAttention on Transportation and Loading

Attention When moving the machine, please not to hold the cable.

Attention Please abide all the warnings and safety requirements to ensure the security.

Compulsory

Requirements

Overloading may cause serious loss. Please load according to the instruction on

the box

Chapter 1 General Information

2 Owner’s Manual of BECS- A15 Computerized Control System

Matters forAttention on Installation

Attention Don't jam the vent on the device. Don’t insert other items into the machine, or it

may get fire.

Attention Make sure the installation direction is correct.

Attention

Don't expose the machine to humidity gas, corrosive gas, water, and other

flammable material.

Matters forAttention on Cable Connection

Forbidden Don't test the insulation of the circuit loop.

Forbidden

Never try to connect the overloaded electronic device on the connectors (like

sockets or terminals).

Attention The insulation

condition of each cable (no matter signal cable or power cable)

should be ensured.

Attention The signal cables and power cables should be separated. Never tie them together.

Attention All the cables should be well fixed. Don’t put any strength on cables. Make sure

each turning point of cable is well protected. Add shelter pipes to increase

insulating capability if necessary.

Attention

must be grounded. The equipment-grounding conductor should

use the wire

with insulation having an outer surface that is green, with or without yellow

stripes. the cross-sectional area of the wire shall not be less than 2mm2, and the

grounding resistance should be less than 10Ω. The equipment-grounding

conductor must be pressed crimping to the circular pre-

insulated terminal and

connected to the position where the grounding mark of the machine case is.

Matters forAttention on Operation

Danger Don't operate the machine when there is any damage on the shelter of the running

parts.

Forbidden When machine is running, do not touch any running part.

Attention Make sure the configuration of power supply is in normal. Use stabilized voltage

power supply when the change of voltage is beyond the range of -10%~10%.

Attention In case of warning, please check out the problem. Operation can only be carried

out again when problem is solved.

Chapter 1 General Information

Owner’s Manual of BECS- A15 Computerized Control System 3

Attention The power supply switch has over-current protection function. If the over-current

switch is activated, the switch can only be closed after 3 minutes.

Matters forAttention on Maintenance and Inspection

Warning If you need to open the machine cover, please cut off the power supply at first.

Due to the capacitance, operator must wait at least one minute before opening the

machine cover.

Attention Circuit boards can be damaged by static. The

circuit boards can only be

disassembled by professional technicians.

Attention

If machine is inactive for a while temporarily, users must power on the machine

regularly (once by every 2 or 3 days, more than an hour for each time).

Attention

If machine is inactive for a long time, users should have the machine checked

before power-on.

Matters forAttention on Rejection

Attention Rejection should obey the rules and regulations set by national industrial

electronic standards.

1.2 Main Features

1. User-friendly Interface on Touching Panel

The adoption of the touching panel technology offers user the delightful operation and

easy learning. The beautiful screen display turns everyday work into joyful experiences.

2. Huge Memory Capacity

The memory capacity reaches 100 million stitches, which can meet demands of different

customers.

3. Maximum StitchAmount of One Pattern Reaches Two Million

At present a single pattern in the system has the maximum of 2 million stitches and 1,000

times of automatic color changing.

4. Multi-Task Parallel Operation and Free Shift among Tasks

During the embroidery, actions like pattern input & output, preparation for the following

patterns and modification of parameters can be carried out.

5. Storage of Frequently Used Parameters and Color-Changing Order for Each Pattern

Chapter 1 General Information

4 Owner’s Manual of BECS- A15 Computerized Control System

Pattern will be saved along with its parameters, color-changing orders and needle bar

colors. System can save the operational details for each pattern. Users can set parameters for a

pattern during the embroidery process of the previous pattern, which will save time and

improve efficiency. Moreover, it is one basis to realize network management.

6. Pattern Input/Output via USB

Customers can use USB disk for data transfer. USB disk supports DIR operation, which is

easy for pattern management. For each directory, system supports operation of 400 patterns or

sub-directory. There is no limitation of directory levels. Patterns in the formats of Binary,

Ternary and Z-nary can be loaded.

7. Patch Embroidery

This function can set a patch point at the position of color code or stop code, and when the

machine embroiders to the patch point, it will halt and move out frame for patching. After

sticking a patch, user would press the start key to return the frame and continue embroidering.

8. Brake Adjustment

User can adjust the parameter of brake to let the main shaft stop at the correct position

according to the characters of his own machines.

9. Save Start Point

This function can save the start point of each pattern, which saves the work of user to

search the start point manually at embroidering the identical pattern.

10. Mechanical Maintainence and Debugging

This function is to easily judge the malfunctions at maintaining and debugging the

machine, such as encoder testing, main shaft speed testing, machine parts testing and the main

shaft stopping at any position, etc.

11. Multi-Language Support

Currently, the system supports the display in Chinese, English, Spanish and Turkish,

Russian, French and many other languages.

12. Pattern Output

Patterns can be output and saved into USB disk. Adoption of TAJIMA’s binary format

Table des matières

Autres manuels DAHAO Contrôleurs

DAHAO

DAHAO A15 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur