Daewoo DX-C811N Manuel utilisateur

Operating Instructions

channel DVR

(Digital VIdeo Recorder)

Model : DX-C811N

DIGITAL VIDEO RECORDER

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of un

insulated “dangerous voltage”within the product’s enclosure that

may be of sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying

the appliance.

WARNING:

TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

DIGITAL VIDEO RECORDER

PRECAUTIONS

• Refer all work related to the installation of this product to qualified service personnel or system

installers.

• Do not block the ventilation opening or slots on the cover.

To prevent the appliance from overheating, place it at least 5 cm (2 inches) away from the wall.

• Do not drop metallic parts through slots.

This could permanently damage the appliance. Turn the power off immediately and contact qualified

service personnel for service.

• Do not attempt to disassemble the appliance.

To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside.

Contact qualified service personnel for maintenance.

• Handle the appliance with care.

Do not strike or shake, as this may damage the appliance.

• Fully charge up the backup battery.

Keep the appliance turned on for at least 48 hours to recharge the backup battery. This procedure is

necessary when using the appliance for the firs time or after it has been unplugged for a long time from the

AC outlet. Insufficient charging of the battery may cause erasure of settings if the AC power supply should

fail. The battery, if fully charged, will back up the settings for 480 hours in an ordinary environment.

• Do not expose the appliance to water or moisture, nor try to operate it in wet areas.

Do take immediate action if the appliance becomes wet. Turn the power off and refer servicing to qualified

service personnel. Moisture may damage the appliance and also cause electric shock.

• Do not use strong or abrasive detergents when cleaning the appliance body.

Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild

detergent and wipe gently.

• Do not operate the appliance beyond its specifiedtemperature, humidity or power source ratings.

Do not use the appliance in an extreme environmentwhere high temperature or high humidity exists.

Use the appliance at temperatures within +5°C-+40°C (41°F -104°F) and a humidity below 90 %.

The input power source for this appliance is 110V-220V AC 50/60Hz.

DIGITAL VIDEO RECORDER

Contents

ⅠControls

1. Front Panel ------------6

2. Rear Panel ------------8

3. Remote Controller ------------9

ⅡInstallation & Connections ----------- 10

1. Camera, Monitor, Microphone, Alarm sensor and Power cord

2. Alarm inputs and Alarm outs

3. PAN/TILT/ZOOM Camera connections

4. PC system requirement for NETWORK Connection

ⅢOperation

1. Time & Date setting. ------------- 12

2. Screen Position Adjustment. ------------- 12

3. Live View ------------- 13

1) Live view mode switching

2) Border Line color

3) Brightness, Contrast & Color adjustment

4. Basic Recording ------------- 16

5. Alarm Recording ------------- 19

6. Pre Recording ------------- 21

7. Schedule Recording ------------- 22

8. Motion Detection Recording ------------- 24

9. Time & Date Search ------------- 26

10.Playback ------------- 27

1) Basic playback

2) Reverse playback

3) Field by field playback

4) Adjusting playback speed

5) Audio Play back

11. Alarm / Motion List Search ------------- 30

12. System Set ------------- 31

DIGITAL VIDEO RECORDER

13. Network Set ------------- 35

14. Information & Log List ------------- 36

15. Zoom ------------ 37

16. PAN/TILT/ZOON Camera Control ------------- 37

17. External Backup Device Control (DAT24)------------- 38

ⅣClient Program

1. How to install and connect?------------- 41

2. Features ------------- 43

3. Image file down load from the DVR server ------------- 45

4. DVR Setting ------------- 46

5. Local Player ------------- 50

ⅤHow to connect modem ------------- 52

ⅥSpecification & Contents

1. Specification ------------- 60

2. Contents

DIGITAL VIDEO RECORDER

Ⅰ

Controls

1. Front Panel Controls

1) POWER button

Press this button to turn the power on; press again to turn the power off. The POWER

LED (red) lights/goes off when the power is on/off. It flashes when switching during

initializing and disk checking.

2) LOCK button

Press this button to lock all unit’s key buttons including the remote controller.

The LOCK LED (green) lights/goes off when the lock is on/off. To release press it

again and enter the password.

3) RESTORE button

Press this button to restore recorded data to the main hard disk from an archive

device only when an external USB DAT24 is connected.

4) SCHEDULE button

Press this button to make scheduled recording standby. The SCHEDULE LED (green)

lights/goes off when the schedule is on/off.

5) INFO button

Press the button to display current system information; press again to display log list.

6) BACKUP button

Press this button to begin making a backup copy of the hard drive. If there is no

peripheral recording device connected, this button cannot be used.

7) PAN/TILT/ZOOM button

Press this button to control a PAN/TILT/ZOOM camera via RS-232 connection.

8) ZOOM button

Press this button to display zoom area box; press again to enlarge the image.

1 2

6 7 8 10 13 19 201615

3 4 5 9 12 14 1711 18

DIGITAL VIDEO RECORDER

Pressing cursors can move this zoom area.

9) MENU button

Press this button to display the MAIN MENU screen.

It is also used as EXIT button to exit all kinds of OSD screen.

10) CLEAR button.

In Zoom mode, pressing this button reduces the image.

In stop mode and playback mode, pressing this button disappears time & date OSD.

Pressing it again appears the OSD.

On ‘RECORD GROUP SET’menu, it sets each channel ‘Motion Detection’.

11) Direction (€•ƒ„) buttons.

In Menu setup mode, used to move the cursor.

In Zoom mode, used to move the zoom area.

12) TIME SEARCH button

Press this button to display the Time Search menu.

13) ALARM SEARCH button

Press this button to display the Alarm Search menu.

14) Numeric buttons (NO. 1~9)

Used to enter the password and select the camera numbers.

15) Quad/Sequence, 0 button

Press this button to display the cameras in quad mode or to switch sequence function.

In addition, this button can be used as number 0 to set the password.

16) AUDIO PB button

Press this button to synchronize the sound track with the scenes.

17) Remote control signal receiver.

18) Mode Indicator.

19) SHUTTLE HOLD button

This button retains the selected playback or reverse playback speed.

Rotate the SHUTTLE ring to the desired search speed, and then press the SHUTTLE

HOLD button while holding the SHUTTLE ring at the selected search speed. Search

speed will be maintained even when the SHUTTLE ring is returned to its original

position.

20) Jog and shuttle operation

SHUTTLE ring

Use the ring to set various menus and search functions, to adjust the playback speed,

and to rewind or forward the image.

JOG dial

Use the dial to set various menus and search functions, and to forward or reverse the

image during playback (field-by-field).

DIGITAL VIDEO RECORDER

2. Rear Panel Connectors

INOUT

USB

CAMERA

AUDIO MIC

6 7

2 3

S-VIDEO8

4COMPOSITE

ETHERNET RS-232C

1 2

63 4 5 7 8 9 10

VIDEO OUT

ALARM IN1

ALARM IN2

ALARM IN3

ALARM IN4

GND

ALARM IN5

ALARM IN6

ALARM IN7

ALARM IN8

GND

ALARM OUTPUT

GND

100V 230V

AC IN

1) CAMERAIN connectors

These are BNC input connectors for 8 cameras

2) VIDEOOUT connectors

A BNC standard composite video output connector

3) AUDIO OUT connector

This is an RCA output for an audio signal.

4) AUDIO IN connector

This is an RCA input for an audio signal.

5) MIC jack

This is an input connector for a microphone.

6) S-VHS OUT connector

An S-VHS connector for separate luminance and chrominance (Y/C) signals This is

an RCA input connector for an audio signal.

7) USB 2.0 connector

This connector is for peripheral recording device.

8) ALARM IN/OUT terminal.

9) RJ-45 ETHERNET connector

10)RS-232C

11)AC power socket

12)Power Fan

DIGITAL VIDEO RECORDER

3. Remote Controller

DVR ID

ZOOM

-._

P/T/Z

ABC DEF

MNOJKLGHI

VWXSTU

YZ@

DISPLAY

PQR

AUDIO-PB

STANDBY/ON

F1 F2 F3 F4

F5 F6 F7 F8

ENTER

A-

RCH

L-SEARCH

STEP

REW

REC

INFO LOG ALARM

STOP TIMER

PLAY FF

BACKUP RESTORE

Option (Not used)

Zoom AUDIO-PB

DISPLAY/QUAD

CANCEL

ALARM SEARCH

TIMER

ALARM NOISE OFF

BACKUP

STOP

PLAYBACK

RESTORE

POWER

Number/Letter

CURSOR

ENTER

TIME SEARCH

LIST SEARCH

REW

REC

SYSTEM INFORMATION

LOG

Field by Field

Pan/Tilt/Zoom

Option (Not used)

DIGITAL VIDEO RECORDER

ⅡInstallation & Connections.

1. Camera, Monitor, Microphone, Alarm sensor and Power cord.

VIDEOOUT

S-VIDEO OUT

AUDIOOUT

Up to 8 cameras

MICIN

MONITOR

CAMERA#1

MICROPHONE

POWER CORD

SENSOR#1

ALARM IN

GND

INOUT

USB

CAMERA

AUDIO MIC

6 7

2 3

S-VIDEO8

4COMPOSITE

ETHERNET RS-232C

VIDEO OUT

AL ARM IN1

AL ARM IN2

AL ARM IN3

AL ARM IN4

GN D

AL ARM IN5

AL ARM IN6

AL ARM IN7

AL ARM IN8

GN D

AL ARM OUT PU T

GN D

2. Alarm inputs and Alarm outs.

ALARMIN1

ALARMIN2

ALARMIN3

ALARMIN4

GND

ALARMIN6

ALARMIN7

ALARMIN8

ALARMOUTPUT

ALARMIN5

GND

±Connection of N.O (Normally Open)

Autres manuels pour DX-C811N

Table des matières

Autres manuels Daewoo DVR

Daewoo

Daewoo DVR-1989D Manuel utilisateur

Daewoo

Daewoo EQ250K Manuel utilisateur

Daewoo

Daewoo DSD-9520 Manuel utilisateur

Daewoo

Daewoo DV-K824DY Manuel utilisateur

Daewoo

Daewoo DX-N111N Manuel utilisateur

Daewoo

Daewoo DX-C811N Manuel utilisateur

Daewoo

Daewoo Video recorder Manuel utilisateur

Daewoo

Daewoo CT Series Manuel utilisateur

Daewoo

Daewoo VQ230K Manuel utilisateur

Daewoo

Daewoo MC2128 Manuel utilisateur

Daewoo

Daewoo Q253 Manuel utilisateur

Daewoo

Daewoo PROline VR516 Manuel utilisateur

Daewoo

Daewoo DV-K224D Manuel utilisateur

Daewoo

Daewoo DS-360 Manuel utilisateur

Daewoo

Daewoo DSD-9502T Manuel utilisateur

Daewoo

Daewoo DV-K88 series Manuel utilisateur

Daewoo

Daewoo SV-250E Manuel utilisateur

Daewoo

Daewoo Video recorder Manuel utilisateur

Daewoo

Daewoo ST441S Manuel utilisateur

Daewoo

Daewoo SV-871 Manuel utilisateur

Daewoo

Daewoo SQ200K Manuel utilisateur

Manuels DVR populaires d'autres marques

FLIR

FLIR M3100E Series Manuel utilisateur

VTRACKPRO

VTRACKPRO FPRO300 Manuel utilisateur

Swann

Swann NVR-7085 models Manuel utilisateur

XtendLan

XtendLan DVR-1670C Manuel utilisateur

urmet domus

urmet domus 1093/004AHD Manuel utilisateur

Holux

Holux M1 Manuel utilisateur

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuel utilisateur

Whistler

Whistler D16VRS Manuel utilisateur

Defender Security

Defender Security 82-20235 Manuel utilisateur

MISUMI

MISUMI MP-WF100M Manuel utilisateur

Speco

Speco D8HU Manuel utilisateur

UST

UST DDR-E04AA Instructions d'utilisation

Consolidated

Consolidated Digital Video Recorder Manuel utilisateur

Mace

Mace DVR0404RW Guide de démarrage rapide

RCA

RCA RTD315W Manuel utilisateur

FSM

FSM Colibri Grande PRO Manuel utilisateur

Hauppauge

Hauppauge HD PVR 2 Manuel utilisateur

Identivision

Identivision ICR-PH161i PIONEER Manuel utilisateur