D-SMART SECUREMME Manuel utilisateur
www.securemme.it | E-mail: info@securemme 1
EN
www.securemme.it | E-mail: info@securemme 2
www.securemme.it | E-mail: info@securemme 3
INDEX
Package content
Descripon
Technical features
Warnings
Installaon
Installer set
Owner configuraon
Power Grid Schedule
Warranty condions
Paper template
4
5
6
7
8
10
13
18
19
21
www.securemme.it | E-mail: info@securemme 4
PACKAGE CONTENT
MANIGLIA
(1) CIRCUIT BOARD (cod. PL8000KxxSH) + MOTOR (cod. MR8000KZA7038)
(2) SUPPORT BATTERY PLATE (cod. PK8000KxxCT)
(3) HANDLE (cod. 5000Xxx)
(4) KNOB FOR CYLINDER (cod. 5032Xxx)
(5) FIXING SCREW FOR SUPPORT BATTERY PLATE (cod. VT80M3XZB25XX)
(6) RECHARGEABLE BATTERY (cod. PP8000KxxXXBT)
(7) CHARGER (cod. PP8000KxxXXBT)
(8) ADHESIVE MAGNET (cod. MG8000XXXXXPO)
1 pz.
1 pz.
1 pz.
1 pz.
3 pz.
1 pz.
1 pz.
1 pz.
www.securemme.it | E-mail: info@securemme 5
D-SMART DESCRIPTION
DSMART is the new device used to motorize locks with European cylinder (interspace handle—key center 85 mm).
The device can be installed on every European cylinder with an 8 mm diameter removable knob.
Easy to install, it doesn’t require any connecon with mains, supply or baery.
Safe and encrypted Bluetooth technology.
Opening of the door with :
Smartphone: download the D-SMART applicaon from the Apple, Android and Windows Phone stores to manage the access and
to configurate the door.
Numeric keypad:customizable code for every user with me slots. (OPTIONAL)
Transponder: key ring format electronic key with Q5 technology. (OPTIONAL)
Remote: for an opening near the door. (OPTIONAL)
Check and limit the access of the users previously enabled.
REMOVABLE RECHARGEABLE BATTERY
BATTERY RECHARGE CONNECTOR
LED INDICATOR (FLASHES WHEN
THE BATTERY LEVEL IS LOW)
CLOSING INTERNAL BUTTON
OPENING INTERNAL BUTTON
HANDLE
CYLINDER KNOB
FOR MANUAL AND OPENING
CLOSING
www.securemme.it | E-mail: info@securemme 6
D-SMART TECHNICAL FEATURES
Dimensions: 230 mm x 65 mm x 25 mm.
Circuit board : Bluetooth technology BT (4.1).
Communicaon frequency: 2.4 GHz.
Baery type : Lithium ion rechargeable baery (Li-Ion).
Baery features: 3.7 V , 3700mAh (use only Securemme baery and charger).
Supply features : input AC 100 - 240 VAC ; output 4.2 VDC,1 A ; 50-60Hz.
Baery recharge me: around 6 hours.
Operane temperature : -10°C ~ +45°C.
Esmated lifeme : around 3 months (theorecal calculaon on 10 openings per day).
Supported systems : Ios 8 orlater versions; Android 4.4 or later versions; Windows Phone 10 or later versions.
Connectors descripon: 1 = supply connector; 2 = motor connector; 3 = external number keypad connector.
Internal keypad: opening by pressing 0 (system ignion) + code, closing by pressing 0 (system ignion) + R.
Security: aer 3 wrong or improper opening aemps the device is blocked for 10 minutes.
1
3 2
www.securemme.it | E-mail: info@securemme 7
D-SMART WARNINGS
- Failing to comply what is wrien in this instrucons manual, may affect the proper funconing and the
subsequent lost of the warranty.
- Any other use is to be considered improper or dangerous.
- Do not reverse the polarity of the metallic contacts on the plate and/or the baery.
- Do not make any working on the door with the device installed, in order to avoid wood or metal traces that can
infiltrate in it.
-Handle with care the baery .
- The device can be used for the purpose it was designed for, that is with Securemme baery and charger .
- Movement of the motor electronically controlled .
-The connecon of all the links must be performed in compliance with the exisng rules.
-Before performing any maintenance on the product, disconnect the baery.
-In case of failure and/or malfunconing of the product remove the baery and use the mechanical key.
- For any service, contact only Securemme or anauthorized assistance center previously authorized by
Securemme .
-Securemme S.r.l. reserves the right to make any changes to the product and to the user’s manual it deems
appropriate, in order to improve the quality or for producon and commercial needs.
DISPOSAL
a) The product can notbe disposed among the householdwaste. Atthe endof the cycle of itslife, dispose the product according
to the current regulaons.
b) Rechargeable baery : as final user you have the obligaon (accordino to the Baery Regulaon) of returning all the
rechargeable baeries that were used before ; the disposal among the household waste is forbidden. The contaminated
rechargeable baeries are labeled with a special symbol that indicates that cannot be disposed among the household waste.
The designaons for involved heavy metals are: Cd = Cadmium, Hg = Mercury, Pb = Lead (the designaons can be found on the
rechargeable baery, as instance under the waste bin symbol reported on the le). It is possibile to freely take all the used
baeries to a local authorized disposal center. In these ways all the legal disposions are followed and you contribuite to the
environmental protecon.
www.securemme.it | E-mail: info@securemme 8
D-SMART INSTALLATION
Before you proceed, fully recharge the baery (unl the led on the charger becomes green).
1. Make a cut in the inner panel as shown in fig. 1, having dimensions of 50 x 105 mm, to housing the motor unit. Cut
out the paper template available on page 18 and place it on the inner door panel. On the external panel prepare a 20
mm hole only if you have the external numeric keypad—transponder reader, insert the cable from the external side to
the internal cut and connect the cable to the circuit board in posion 3 (see page 6).
2. Use a cylinder with knob predisposion ( preferably a Securemme one) and make sure that the size is correct.
3. For a correct operaon of the product, the lubrificaon of the stem in the rotaon area is recommended.
4. Install the cylinder on the lock and fix it.
Fig. 2
Fig. 3 Fig. 4
Fig. 1
min. 52 mm
Handle hole
Internal side
www.securemme.it | E-mail: info@securemme 9
D-SMART INSTALLATION
5. Install the housing motor on the stem of the cylinder unl it stops, ensuring the alignment of the flat surface of the
stem with the housing motor.
6 . Fix the housing motor by ghtening the screw with a 8mm hex wrench.
7. Place the baery support plate on the panel.
8. Install and thighten the handle and the knob on the cylinder
6. Fix on the panel the baery support plate with the 3 screws provided.
7. Insert the baery unl is stops and try to make the first test, by pressing the opening and closing buons.
Fig. 5 Fig. 6 Fig. 7
Fig. 8 Fig. 9 Fig. 10
www.securemme.it | E-mail: info@securemme 10
D-SMART CONFIGURATION Installer
11. Turn the smartphone bluetooth on and scan for new devices.
12. Connect it with the device having the default name Securemme.
13. Download the specific smartphone applicaon by typing Dsmart or Securemme into the
IOs, Android and Windows Phone storse, then open it.
14. Add a new device by clicking on + (Add lock)
15. Click on Scan to find the Securemme device with its relave address.
16. Click on Securemme and connect the device with the smartphone.
17. Click on the logo sengs to get access to the lock detail.
18. Click on date and me and save to synchronize the me with the device.
19. Insert the Factory master code: master.
20. Click on Advanced opons for the configuraon of the door.
21. Set the motor power: the power is set on a standard default value, it is possibile to in-
crease this value of 15% in case of more fricon. Please note that an increase of the po-
wer corresponds to an increase of the baery drain.
22. Closing mode: Manual= closing of the lock even with door opened (without amgnet); Se-
miautomac= closing of the lock by clicking on the red buon only with door closed (it is
necessary to affix the magnet); Automac = closing of the lock everyme the door is clo-
sed (it is necessary to affix the magnet).
23. Closing sensor: use the default magnetometer (affix the magnet on the door frame).
24. Opening direcon: set right or le according to the door orientaon.
25. Calibrate magnetometer: do this operaon with “closing mode”=manual. Apply the ma-
gnet on the frame without scking it, but by placing it in the middle of the frame in-line
with the handle (see Fig 11); close the door and click on the command “Calibrate” when
the door is closed. Remember to check that the acquired data with closed door should be
higher than 300 points over the value acquired when the door is slightly away from the
swing door. Otherwise replace the magnet and repeat the operaon. Now is possibile to
set the semi-automac or automac closure.
Table des matières
