D-Link DWR-M920 Manuel utilisateur
4G LTE ROUTER
DWR-M920
QUICK
INSTALLATION
GUIDE
DWR-M920
2
ENGLISH
CONTENTS OF
PACKAGING
CONTENTS
4G LTE ROUTER
DWR-M920
12V 1A POWER ADAPTER
ETHERNET CABLE
CONNECT THE ROUTER TO YOUR PC DURING SETUP
If any of these items are missing from your packaging
contact your reseller
DWR-M920 3
ENGLISH
PRODUCT
SETUP
HARDWARE SETUP
Ensure that your DWR-M920 Mobile Router is powered off before performing the steps below.
1. Insert a standard USIM card into the SIM card slot located on the backside of the router
with the gold contacts facing downward.
2. Insert the Ethernet cable into the LAN Port 1 on the back panel of the DWR-M920 MobileRouter,
and the other end into an Ethernet port on a computer to configure the unit.
Note:
crossover Ethernet cables can be used.
Log in using the username and password below.
IP ADDRESS: http://192.168.0.1
USERNAME: admin
(as printed on the
device label)
PASSWORD:
dlink-M920-2.4G-xxxxWi-Fi NAME:
(as printed on the
device label)
PASSWORD:
Note:
The DWR-M920 Mobile Router LAN Ports are “Auto-MDI/MDIX.” Therefore, patch or
The 4G connection can also be used as abackup WAN. Once abackup is configured.
ADVANCED SETUP (ACCESS VIA IP ADDRESS)
Open a browser window and enter the below IP address into the browser address field.
3. Connect the power adapter to the socket on the back panel of your DWR-M920 Mobile Router and
plug the other end of the power adapter into a wall outlet or power strip.
a. Turn ONthe router. The Power LED will light up toindicate that power is being supplied tothe router.
c. The initialization process takes about 45 seconds to a minute.
b. After a few moments, if a connection has been established, the following LEDs will turn
solid blue: Power, LAN 1-3 (depending on which port your Ethernet cable has been
connected to), Wi-Fi, LTE and WAN (if connection is used).
DWR-M920
4
ENGLISH
TROUBLESHOOTING
1. HOW DO I CONFIGURE MY DWR-M920 ROUTER OR CHECK MY WIRELESS NETWORK
NAME (SSID) AND WIRELESS PASSWORD (WPA KEY)?
- Connect your PC to the router using an Ethernet cable.
- Or to connect wirelessly to the router select dlink-M920-2.4G-xxxx (xxxx is last 4 digits of mac address)
from the Wi-Fi list of the device you want to connect from. When prompted for a password, use the
WPA key printed at the bottom of the router.
- Open a web browser and enter the router's IP address: http://192.168.0.1
- Log into the router using the default usernameadmin, the default password (as printed on the device label)
Note: If you have changed the password and cannot remember it, you will need to reset the
router to factory defaults.
2. HOW DO I RESET MY DWR-M920 ROUTER TO FACTORY DEFAULT SETTINGS?
- Ensure the router is powered on. If you cannot remember your router administrator password,
you may press and hold the reset button on the back side of the router for about 10 seconds.
Note:
in question 1 and reconfigure your router through the GUI.
3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY
WIRELESS NETWORK NAME (SSID) OR WIRELESS PASSWORD (WPA KEY)?
- Every PC that needs to connect to the router wirelessly, you will need to ensure you use the
correct Wireless Network Name (SSID) and Wireless Password (WPA key).
- Use the web based user interface (as described in question 1 above) to check or choose
your wireless settings.
- Make sure you write down these settings so that you can enter them into each wirelessly
4. WHY AM I UNABLE TO ESTABLISH AN INTERNET CONNECTION?
- If connecting using a 4G mobileconnection, makesure that youare withinthe network coverage
- If connecting using the WAN via ADSL/Fibre service, make sure the modem has been enabled/
SETUP AND CONFIGURATION PROBLEMS
- Once logged in, you can configure your router through the GUI.
Resetting the router to factory default will erase the current configuration. Log in as outlined
connected PC.
of your SIM card provider, and that the service has been correctly configured.
connected and is operational, and that the service is correctly configured.
ENGLISH
Tech Support for customers in
Egypt
Technical Support Call Center: +20 2258 66777
Kingdom of Saudi Arabia
Technical Support:
+966 1121 70009
South Africa
Technical Support:
+27-08600-35465, 012 741 2000
Pakistan
Technical Support: +92-21-34548310, 34305069
Morocco
Phone office: +212 700 13 14 15
Email: [email protected]
Bahrain
Technical Support: +973 1 3332904
Kuwait
Email: [email protected]
TECHNICAL SUPPORT
D-Link Middle East - Dubai, U.A.E.
Technical Support: +971-4-8809033
Table des matières
Autres manuels D-Link Routeur sans fil
D-Link
D-Link DI-624M - Wireless 108G MIMO Router Manuel utilisateur
D-Link
D-Link DIR-300 - Wireless G Router Manuel utilisateur
D-Link
D-Link DWR-510 Manuel utilisateur
D-Link
D-Link DWR-921 Manuel utilisateur
D-Link
D-Link Wireless VPN Router DI-824VUP Manuel utilisateur
D-Link
D-Link DSL-2650U Manuel utilisateur
D-Link
D-Link DSL-G2452GR Manuel utilisateur
D-Link
D-Link DIR-655 - Xtreme N Gigabit Router Wireless Manuel utilisateur
D-Link
D-Link DIR-1935 Manuel utilisateur
D-Link
D-Link EXO AX DIR-X1870 Manuel utilisateur
D-Link
D-Link DGL-4100 - GamerLounge Broadband Gigabit Gaming... Manuel utilisateur
D-Link
D-Link DIR-505 Manuel utilisateur
D-Link
D-Link VoIP Wireless Router DVG-G5402SP Manuel utilisateur
D-Link
D-Link DIR-890L Manuel utilisateur
D-Link
D-Link DSL-2640U Manuel utilisateur
D-Link
D-Link N 150 Manuel utilisateur
D-Link
D-Link DSL-2740R Manuel utilisateur
D-Link
D-Link AC1750 Manuel utilisateur
D-Link
D-Link DWR-112 Manuel utilisateur
D-Link
D-Link DSL-G624T Manuel utilisateur
