D-Link DIR-822 Manuel utilisateur
Quick Installation Guide
DIR-822
AC1200 Wi-Fi Router
DIR-822 Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Router DIR-822
•Power adapter DC 12V/0.5A
•Ethernet cable
•Quick Installation Guide” (brochure).
If any of the items are missing, please contact your reseller.
The User Manual” and Quick Installation Guide” documents are available
on D-Link website (see www.dlink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
2
DIR-822 Quick Installation Guide
Default Settings
IP address of ireless router 192.168.0.1
Username (login) admin
Pass ord admin
Name of ireless net ork
(SSID)
2.4GHz dlink-XXXX1
5GHz dlink-XXXX-5GHz2
Net ork key (PSK)
see the field Pass ord
on the bottom panel of
the device3
!
For security reasons, DIR-822 with default settings cannot connect to
the Internet. To get started, please set your own password used to
access the web-based interface and, if needed, configure other settings
recommended by your ISP.
1 See the field Wi-Fi Name (SSID) 2.4GHz on the bottom panel of the device. For the models of the
hardware version /RU the default network name is DIR_822C1A.
2 See the field Wi-Fi Name (SSID) 5GHz on the bottom panel of the device. For the models of the hardware
version /RU the default network name is DIR_822C1A-5G.
3 For the models of the hardware version /RU the default network key is WPS PIN.
3
DIR-822 Quick Installation Guide
System Requirements and Equipment
•A computer with any operating system that supports a web browser.
•A web browser to access the web-based interface of the router:
◦Apple Safari 5 and later
◦Google Chrome 5 and later
◦Microsoft Internet Explorer 8 and later
◦Mozilla Firefox 5 and later
◦Opera 10 and later.
•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•An 802.11a, b, g, n or ac Wi-Fi adapter to create a wireless network.
4
DIR-822 Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between any of LAN ports located on the back
panel of the router and the Ethernet port of your PC.
3. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
4. Turn on the router by pressing the POWER button on its back panel.
5. Turn on your PC and wait until your operating system is completely
loaded.
Now you should configure your PC to obtain an IP address automatically (as
DHCP client).
5
DIR-822 Quick Installation Guide
Obtaining P Address Automatically
in OS Windows XP
1. Click the Start button and proceed to the Control Panel > Net ork
and Internet Connections > Net ork Connections window.
2. In the Net ork Connections window, right-click the relevant Local
Area Connection icon and select the Properties line in the menu
displayed.
3. In the Local Area Connection Properties window, on the General
tab, select the Internet Protocol (TCP/IP) line. Click the Properties
button.
6
DIR-822 Quick Installation Guide
4. Select the Obtain an IP address automatically and Obtain DNS
server address automatically radio buttons. Click the OK button.
5. Click the ОК button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
7
DIR-822 Quick Installation Guide
Obtaining P Address Automatically
in OS Windows 7
1. Click the Start button and proceed to the Control Panel window.
2. Select the Net ork and Sharing Center section. (If the Control Panel
has the category view (the Category value is selected from the Vie by
drop-down list in the top right corner of the window), choose the Vie
net ork status and tasks line under the Net ork and Internet
section.)
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
Net orking tab, select the Internet Protocol Version 4 (TCP/IPv4)
line. Click the Properties button.
8
DIR-822 Quick Installation Guide
6. Select the Obtain an IP address automatically and Obtain DNS
server address automatically radio buttons. Click the OK button.
7. Click the OK button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
9
DIR-822 Quick Installation Guide
PC with Wi-Fi Adapter
1. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
2. Turn on the router by pressing the POWER button on its back panel.
3. Turn on your PC and wait until your operating system is completely
loaded.
4. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in
wireless NICs are equipped with a button or switch that turns on/off the
wireless adapter (refer to your PC documents). If your PC is equipped
with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.
10
Autres manuels pour DIR-822
10
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels D-Link Routeur Wi-Fi
