CYP DCT-37 Manuel utilisateur
DCT-37
UHD Audio Center
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2015 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
RDV1 10/06/15 Preliminary release
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 2
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 Top Panel ..........................................5
6.4 Remote Control................................6
6.5 OLED Menu .......................................7
7. Connection Diagram ............................ 9
8. Specications ...................................... 10
8.1 Technical Specications ...............10
8.2 Audio Specications......................11
9. Acronyms ............................................. 11
1
1. INTRODUCTION
The UHD Audio Center is designed to allow multiple analog/digital
audio sources to be controlled, switched and output to a variety of
analog/digital audio equipment. With video supports up to 6G at 4K2K
and audio sampling rate converter up to 384KHz this device has an
unbeatable feature you can nd in the market. Also it supports 2CH
LPCM audio, HDMI, USB Audio 2.0, Optical and Coaxial input/output
with both ADC and DAC functions. USB supports DSD (Direct Stream
Digital) and DOP (DSD over PCM) decoded, with high sampling
frequency to perform high quality and lower the probability of
distortion.
For professional, headphone output with build-in amplier and XLR
(Low noise Professional Balance) output offer unparalleled audio
quality. Traditional 3.5mm earphone jack analog input and stereo
RCA output with a highly accurate PLL and low jitter reduction clock
system allows user with total enjoyment over the original sound. OLED
display with on-panel control and IR remote control leave user with
friendly use over the device.
2. APPLICATIONS
• Audio format conversion and sampling upgrade
• Professional audio display
• PC audio display onto professional speakers/headphone
• Analog to digital or digital to analog audio conversion
3. PACKAGE CONTENTS
• 1×UHD Audio Center
• 1×Remote Control (with Battery)
• 1×USB Driver Disc
• 1×6.3mm to 3.5mm Phone Jack Cable
• 1×5 V/3 A Power Adaptor
• 1×Operation Manual
2
4. SYSTEM REQUIREMENTS
Input source equipment such as CD /DVD player or computer via USB,
optical or analog stereo output to amplier or speaker with analog
stereo output.
5. FEATURES
Digital
• Supports Coaxial, Optical, USB and 4 HDMI inputs
• Supports HDMI, Coaxial and Optical outputs
• Supports digital audio signal input and conversion into analog
stereo
• Supports HDMI Audio output can either output the incoming
embedded HDMI (Bypass Mode) or insert the selected audio signal
(Ext Audio Mode)
• HDMI video always bypassed to HDMI output
• Supports HDMI video resolutions up to 4K2K
(3840×2160@24/25/30/50/60Hz & 4096×2160@24/25/30/50/60Hz)
• Supports HDMI data rate up to 6Gbps and Deep Color up to 1080p
36bit
• Supports Coaxial and Optical input sampling rate up to
384kHz/32bits
• Coaxial and Optical input support DOP decode to PCM
• HDMI audio embedding or de-embedding
• Supports Sampling Rate Conversion, all inputs can be SRC to 44.1,
48, 88.2, 96, 176.4, 192 and 384kHz via DSP Engine
Analog
• Supports L/R in/output, XLR and 6.3mm headphone outputs
• Supports analog audio signal input converts into digital signal
output
• Supports Headphone output Volume Control
• Headphone output volume control over main control dial or remote
control
• Headphone output fades in after system is muted
3
• 6.3mm headphone output
Misc
• Control by remote control and on-panel wheel
• Direct power and mute button on unit
• High viewing angle OLED display
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
MENUMENU
Coaxial
44.1K
In
->
-20.0 dB
44.1K
UHD Audio Center
384/32
1 2 3 4 5 6
16.3mm HEADPHONE OUT: This slot is to connect with 6.3mm
professional headphone set for user to enjoy the individual
professional audio sound.
23.5mm LINE IN: This slot is to connect with 3.5mm phone jack cable
from any audio equipment for stereo line in input audio signal.
3POWER LED: The LED will illuminate red when the device is
connected with power supply (standby), and will turn green if turn
on the device.
4IR WINDOW: This is the IR receiver window that accept IR signal
from the remote control of this device that is included in the
package.
5OLED: This OLED LCM displays the in/output selection with volume
setting, sampling rate and audio channels.
6MENU/VOLUME CONTROL: Press this button to enter into the menu
selection or rotate to adjust the volume.
4
6.2 Rear Panel
DC 5V
USB
COAX. COAX.
OPT. OPT. L
RXLR OUT XLR OUT
RL
IN OUT
1234
HDMI IN HDMI OUT
1
32
4 5 67 8 9 10
1DC 5V: Plug the 5V DC power adaptor included in the package
into the unit and connect the adaptor to an AC outlet for power
supply.
2HDMI IN 1~4: Connect to the HDMI input source equipment such
as DVD/ Blu-ray player with 6G HDMI signal sending with HDMI
cable. 6G signal are support on all 4 ports.
3HDMI OUT: Connect to HDTV/monitor for output image display with
6G HDMI signal sending from HDMI cables.
4COAX. IN: Connect with input source equipment such as Set-Top-
Box or PS3 for input audio signal sending with Coaxial cable.
5OPT. IN: Connect with input source equipment such as DVD/Blu-
ray player for input audio signal sending with Optical cable.
6USB IN: This slot is to connect with PC/NB source equipment for
USB audio signal input sending. Also this slot could use on rmware
upgrade.
Note: USB input need to install drivers and applications from the
disc which contained on package.
7COAX. OUT: Connect to amplier or active speaker with coaxial
cable.
8OPT. OUT: Connect to amplier or active speaker with optical
cable.
9L/R OUT: Connect to amplier or active speaker with RCA jack
cable.
10 XLR (L/R) OUT: These slots are to connect from output amplier or
directly to professional output speakers with XLR cables. Balanced
5
audio allows for the use of long cables while reducing susceptibility
to external noise.
6.3 Top Panel
POWER MUTE
1 2
1POWER: Press this button to switch on the device or turn it to
standby mode.
2MUTE: Press this button to mute all volume instantly.
Table des matières
Autres manuels CYP Système stéréo
