CYP CUSB-V604H Manuel utilisateur
CUSB-V604H
4K UHD+ HDMI to USB Video Capture Recorder
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
VERSION HISTORY
REVISION DATE SUMMARY OF CHANGE
VS0 18/09/18 Initial technical review
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................2
5. Features............................................................2
6. Operation Controls and Functions.................3
6.1 Front Panel................................................. 3
6.2 Rear Panel.................................................. 4
6.3 Conguration and Video Capture ......... 5
6.3.1 Video Capture Conguration ........ 5
6.3.2 Video Capture................................. 7
7. Connection Diagram ......................................8
8. Specications ..................................................9
8.1 Technical Specications .......................... 9
8.2 Video Specications............................... 10
8.3 Audio Specications............................... 11
8.4 Cable Specications .............................. 12
9. Acronyms.......................................................12
1
1. INTRODUCTION
This HDMI to USB video capture recorder with HDMI bypass can
support resolutions up to 18Gbps (600MHz) 4K UHD with HDR (via the
bypass path) while simultaneously streaming the audio and video
signal at 1080p to a USB connected PC for capture or re-broadcast.
HDMI sources up to 1080p60 are supported for capture without
modication, while 4K sources will be automatically scaled down to
1080p. The use of a special video timing stabilization feature helps to
ensure that the USB capture stream won’t lock up or drop, even if the
HDMI input source is intermittent or becomes disconnected. Digital
stereo audio from either HDMI (LPCM 2.0) or the 3.5mm analog audio
input will be captured with the HDMI video source and is selectable
within the conguration software.
USB capture is accomplished using the UAC (USB Audio Class) and
UVC (USB Video Class) standards, allowing the unit to support most
common video capture, chat, or streaming software, including
support for the Free OBS (Open Broadcaster Software) streaming
software which is available for Windows PC, macOS and Linux. The
unit is powered directly by the USB 3.0 port so an external power
supply is not required (A Y-cable is required when connected via USB
2.0 in order to deliver the necessary power). Availability and access to
the controllable features of the unit depend on the capture software
used.
2. APPLICATIONS
• Live video stream recording for broadcast
• Security camera recording
• Gameplay video archival
3. PACKAGE CONTENTS
• 1×HDMI to USB Video Capture Recorder
• 1×USB 3.0 Cable (Type-B to Type-A)
• 1×Shockproof Feet (Set of 4)
• 1×Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as a media player, video game
console or set-top box.
• HDMI receiving equipment such as an HDTV, monitor or audio
amplier.
• Personal computer (Windows or macOS) with a USB 3.0 port and
plenty of available hard drive space.
5. FEATURES
• HDMI input and output with HDR, 3D & 4K@60Hz support, DVI 1.0
compatible
• HDCP 2.2 and HDCP 1.x compliant
• Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
and output
• Supports Deep Color input and output up to 12-bit
• Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
• Automatically scales 4K sources to 1080p for USB capture
• Unit may be powered directly via USB 3.0 (When using USB 2.0, a
Y-cable is required to provide additional power)
• Supports video timing stabilization to help ensure a reliable and
stable USB capture stream
• Capturing over USB 3.0 allows uncompressed video and audio data
capture (up to 1080p, LPCM 2.0)
• Capturing over USB 2.0 requires the application of minimal MJPEG
compression to the video and audio data (up to 1080p, LPCM 2.0)
• Supports capturing 2 channel digital audio from either HDMI (LPCM
2.0) or the 3.5mm analog audio input (selectable via conguration
software)
• Compliance with the UAC (USB Audio Class) and UVC (USB Video
Class) standards, allows the unit to support most common capture
and video streaming software
Note: Availability and access to the controllable features of the unit
depend on the capture software used.
• Support for the Free OBS (Open Broadcaster Software) streaming
software which is available for Windows PC, macOS and Linux
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER HDCP
ACTIVE /
RECORD
1 2 3
1POWER LED: This LED will illuminate RED to indicate the unit is on and
receiving power but does not yet have a live HDMI source. When
a live HDMI source is detected, the LED will illuminate GREEN.
2ACTIVE/RECORD LED: When software on the connected PC is
actively receiving video from the unit via USB, this LED will illuminate
GREEN.
3HDCP LED: This LED indicates the HDCP state of the connected
HDMI source. If the source is using HDCP 1.x, the LED will illuminate
RED. If the source is using HDCP 2.2, the LED will illuminate BLUE. If
the source is not using HDCP, the LED will remain off.
Note: Recording video sources containing HDCP protection is not
supported by this unit. Only HDMI bypass will be active with HDCP
sources.
4
6.2 Rear Panel
USB 3.0 HDMI OUT HDMI IN AUDIO IN
1 2 3 4
1USB 3.0 PORT: Connect directly to a PC’s USB 3.0 port for control,
video capture and power.
Note: If connected via USB 2.0, use of a Y-cable connected to 2
USB 2.0 ports is required in order to properly power the unit.
2HDMI OUT PORT: Connect to an HDMI TV, monitor or amplier for
digital video and audio output.
3HDMI IN PORT: Connect to HDMI source equipment such as a
media player, game console or set-top box.
4AUDIO IN PORT: Connect to the stereo analog output of a device
such as an audio player or PC.
5
6.3 Conguration and Video Capture
6.3.1 Video Capture Conguration
The USB Video Capture Control software provides control over a
selection of basic functions of the unit, including: audio source, HDCP,
video settings and volume. An option to return the unit to its factory
defaults is also provided.
Note: Please obtain the “USB Video Capture Control” software from
your authorized dealer and save it in a directory where you can easily
nd it. Both Windows and macOS versions are available.
To use the software, connect the unit to your PC via the provided USB
3.0 cable and then execute the control application. A conguration
window, similar to the screenshot below, will appear. All changes
made to the video capture signal via this app will take effect
immediately.
1) Audio Source: Switch the audio source to record between the
embedded HDMI audio and the analog line input.
Note: Only LPCM 2.0 audio can be recorded. Bitstream audio is
not supported.
2) HDCP: Enable or disable HDCP support on the HDMI input.
Table des matières
Autres manuels CYP DVR
