Cyber ExerCycle Manuel utilisateur
Cyber ExerCycle
Cyber ExerCycleCyber ExerCycle
Cyber ExerCycle
TM
TMTM
TM
Game Controller for Your Exercise Equipment
Game Controller for Your Exercise EquipmentGame Controller for Your Exercise Equipment
Game Controller for Your Exercise Equipment
USER GUIDE
Rev .
1
T BLE OF CONTENTS
T BLE OF CONTENTST BLE OF CONTENTS
T BLE OF CONTENTS
1. CEC_KIT1 COMPONENTS ............................................................................................. 2
2. INST LLING CYBER EXERCYCLE ON YOUR BIKE .................................................... 5
3. CONNECTING THE G ME CONTROLLER TO THE PC............................................ 3
4. INST LLING ND RUNNING CYBER EXERCYCLE SETUP PPLIC TION............ 8
5. INTERF CE DESCRIPTION - JOYSTICK MODE ...................................................... 11
6. INTERF CE DESCRIPTION - NET THLON MODE ................................................ 13
7. INTERF CE DESCRIPTION - KEYBO RD MODE.................................................... 14
8. INTERF CE DESCRIPTION - KEYBO RD ND MOUSE MODE........................... 16
9. REQUIREMENTS............................................................................................................. 18
10. PREC UTIONS ............................................................................................................... 19
11. TERMS ND CONDITIONS.......................................................................................... 20
12. RETURN ND W RR NTY.......................................................................................... 20
2
1. CEC_KIT1 COMPONENTS
Cyber ExerCycle Kit contains the following components:
1. Nunchuk style joystick with 2 ft cable.
2. Speed sensor with 6ft cable and a small magnet. ttaches to the bike using
velcro.
3. Controller box. Contains sensor connector and mini USB.
4. 3 ft USB cable. USB extension cable may be added (not included with the kit).
5. User Guide that includes a quick start guide and installation instructions
(electronic download, PDF format).
6. Setup utility. Windows program used to configure different operating modes
(electronic download).
Notes:
Colors may not be exactly as shown.
Excessive USB extension cabling may cause incorrect operation.
3
2. INST LLING CYBER EXERCYCLE ON YOUR BIKE
Connect Cyber ExerCycle to your exercise equipment in three steps:
1. ttach the sensor and the magnet to the pedals of your bike
2. Mount the controller to the frame of your bike.
3. Plug the controller into a USB port of your computer.
ttach the sensor to the stationary parts of the bike. Run the sensor cable up the frame.
Wrap the cable around the frame if required, so that the cable is not loose. Ensure that
the cable will not get tangled in the pedals. Note the orientation of the sensor to get
correct forward pedalling direction.
Mount the magnet so that it does not interfere with the sensor (ensure that the
minimum distance between the sensor and the magnet is between 0.25" to 1").
If the crank arm is made our of steel, the magnet may simply stick to the metal.
Optionally use double sided tape to attach the magnet.
s you move the pedals the magnet should come close to the sensor once per full
rotation on the crank set.
4
Mount the controller box to the frame of your bike using Velcro. The controller box
should typically be located close to the bike handles (makes handling the joystick easier)
The sensor attaches to the controller box using 2.5mm plug.
PC connects to the controller box through the mini USB connector.
If you have any questions regarding the installation, please email us at
info@cyberbiking.com
5
3. CONNECTING THE CONTROLLER TO THE PC
Connect the game controller to your PC using the supplied USB cable. The controller
operates as a standard HID device, therefore does not require any special drivers. The
controller requires USB port 1.0 or later.
fter connecting the controller to your PC, Windows will automatically install all the
required drivers. When running the status LED on the side of the controller box will turn
on green.
Confirm the installation of the device by opening the control panel and viewing installed
devices. The controller emulates a keyboard, joystick and a mouse.
Windows 7:
6
Windows Vista:
7
fter mounting all the components and connecting the controller to the PC, verify the
operation of Cyber ExerCycle:
• Pressing "Z" button on the joystick should make the LED on the controller turn
solid green.
• Moving the magnet close to the sensor forces the status LED to turn sold green.
s you move the magnet away, the status LED should start blinking again.
• Open Game Controller Properties and try different controller inputs such as
pressing buttons, shaking the joystick. When pedaling you should see the Y xis
of the display move. (make sure that the controller is setup for Joystick Mode -
see next section)
8
4. INST LLING ND RUNNING CYBER EXERCYCLE
SETUP PPLIC TION
Cyber ExerCycle can be configured for one of 4 modes.
1. Joystick Mode
Joystick ModeJoystick Mode
Joystick Mode. The controller emulates joystick.
2. Net thlon Mode
Net thlon ModeNet thlon Mode
Net thlon Mode. The controller emulates joystick and mouse.
3. Keyboard Mode
Keyboard ModeKeyboard Mode
Keyboard Mode. The controller emulates joystick.
4. Keyboard and Mouse Mode
Keyboard and Mouse ModeKeyboard and Mouse Mode
Keyboard and Mouse Mode. The controller emulates keyboard and mouse.
The controller allows you to configure pedaling intensity. This determines on how fast
you need to pedal to move your character or a vehicle on the screen. The settings range
from very easy (40 RPM) to very hard (185 RPM).
Once configured, the controller will remember your selections even if the controller is
connected to another PC.
Once you download the file. Unzip it into a temporary folder and run the setup file.
9
Follow installation instructions of the setup file:
Press next to continue.
Autres manuels pour ExerCycle
1
Table des matières
Autres manuels Cyber Manettes de jeux vidéo
