CWSI CP-3000 Manuel utilisateur

CP-3000 WIRELESS FIRE ALARM CONTROL

PANEL

OPERATING and INSTALLATION

INSTRUCTION MANUAL

CWSI

10798 N.W. 53 Street

Sunrise, Florida 33351

Disclaimer

The

information contained in this document is believed to be accurate and reliable at the time

of printing. Known corrections or omissions may be found on errata sheets included in the various

product manuals. However, Commercial Wireless Systems International

, LLC herein known as CWSI,

may not be held accountable for errors or omissions in this or other CWSI publications. No license is

granted by implication or otherwise under any patent rights of CWSI

CWSI makes no claims as to the suitability of their products for a specific installation site or for

a specific application. Local testing for suitability of both the proposed site and application is required.

Unless prohibited by law, the liability of CWSI is limited to the cost of the equipment supplied

by C

WSI or their authorized agent. The liability of CWSI for defective product is limited to the repair or

replacement of the defective product at the option of CWSI. CWSI is not liable for, nor will

reimbursement be made for the removal of, or replacement of the defective equipment or for the

inconvenience or supplemental costs which may be incurred by the installer, installing company,

dealer or end user of the equipment.

All guarantees or warranties on the products are limited to those published by CWSI and no

others, given verbally or in writing are valid except when signed specifically by the president of CWSI

DISCLAIMER

....................................................................................................

INTRODUCTION

...............................................................................................

SECTION 1

DESCRIPT

ION AND FEATURES

...............................................

1.1 Product Description and Wireless System O

verview

..............................................

1.2 Features

.......................................................................................................................

SECTION 2

–

SPECIFIC

ATIONS AND COMPATIBI

LITY

................................

2.1 Specifications

..............................................................................................................

2.2 Compatibility

...............................................................................................................

SECTION 3

INSTALLA

TION

..........................................................................10

3.1 Proper Installation Order

............................................................................................

3.2 Preparing the Installation Site

....................................................................................

3.3 Receiving and Unpacking the Equipment

................................................................

3.4 Installing the CP

3000

................................................................................................

3.4.1 The Backup Batteries

..........................................................................................................................

4.2 Cover Panel

.........................................................................................................................................

3.4.3 Enrolling Devices Into the CP

3000

....................................................................................................

3.4.4 Installing the Repeaters and Initiating Devices

...................................................................................

3.5 System Inputs and Outputs

........................................................................................

3.5.1 Alarm A, B, C, D Contacts

..................................................................................................................

3.5

.2 Trouble Contacts

................................................................................................................................

3.5.3 Alarm Contacts

...................................................................................................................................

3.5.4 Auxiliary

Output Local Energy Municipal Box Service

.......................................................................

3.5.5 Notification Appliance Circuits

............................................................................................................

3.5.6 Notification Appliance Compatibility

....................................................................................................

3.5.7 Ethernet

Connection

...........................................................................................................................

3.5.8 Telephone Line Jack

...........................................................................................................................

3.5.9 RS

232

DB9 Connector

......................................................................................................................

SECTION 4

- SYSTEM O

PERATION

...............................................................21

4.1 User Interface

..............................................................................................................

4.1.1 LCD

.....................................................................................................................................................

4.1.2 LEDS

...................................................................................................................................................

4.1.3 Buttons

................................................................................................................................................

4.2 Modes of

Operation

....................................................................................................

4.2.1 Normal

.................................................................................................................................................

4.2.2 Alarm

...................................................................................................................................................

4.2.3 Sprinkler Supe

rvisory

..........................................................................................................................

4.2.4 Trouble Signals

...................................................................................................................................

4.2.5 System Test

........................................................................................................................................

4.2.6 M

emory Recall

....................................................................................................................................

SECTION 5

DIGITAL

ALARM COMMUNICATORS

......................................25

SECTION 6

SYSTEM PROGRAMMING

........................................................25

Appendix A

APPROVED ANTENNAS…………………………………………..28

Introduction

This manual is intended for persons involved with the installation, maintenance and operation

of the CP

3000 RF control p

anel. It is a comprehensive guide that provides details on product

operation and should be kept for future reference. This manual consists of separate sections. Each

section contains information in a manner as to be clear as possible. It is designed to pro

vide all the

information necessary to install, program and operate the equipment.

Read and understand this

manual prior to installing or operating the equipment. It is imperative that the installer understan

d the

requirements of the Authority Having Jurisdiction (AHJ) and be familiar with the standards set forth by

Underwriters Laboratories, NFPA

72 National Fire Alarm Code, and NFPA 70 National Electrical

Code.

The model CP

3000 is the first

in a series of wireless fire annunciation and control panels

manufactured by CWSI. This system was designed and tested to comply with

NFPA

72 National Fire

Alarm Code and UL

864 standard. The CP

3000 is approved for Local, Proprietary, Remote

Station, Central Station and Auxiliary

service when installed in accordance with this manual.

FCC Warning

Important: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equip

ment.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may

cause undesired operation.

FCC Warning - RF Exposure

Important:

When using this device, a certain separation distance between antenna and

nearby persons has to be kept to ensure RF exposure compliance. In order to comply

with the RF exposure limits esta

blished in the ANSI C95.1 standards, the distance

between the antennas and the user should not be less than [20cm].

Section 1 - Description and Features

1.1 Product Description and Wireless System Overview

The CWSI CP

3000 is an intelligent addressable wireless fire alarm

control panel. The CP

3000

system provides for annunciatio

n of up to 1024 individual addressable initiating devices

including and

not limited to, smoke detectors, heat detectors, pull stations, water flow and sprinkler supervisory

transmitters

. It has two on board tr

ansceivers that allows all communications with devices to be done

via radio frequency (RF). Since the communications are bi

directional the control panel can send out

control commands to perform functions including turning on or off repeater

NAC circuits

and tandem

smoke detector

sounder

activation. The advanced RF protocol and speed of the CP

3000 allows a

failure of any one of up to 1024 initiating devices to be re

ported within 200 seconds. It is field

programmable making the addition of devices both easy and cost effective. Ethernet

connection is

provided for local area network

connection (LAN) as well as an optional modem

that will allow system

information and status to be retrieved at a remote location. An internal piezo

sounder provides distinct

tones for alarm, supervisory and trouble

signals

. The system conta

ins a clock

and non

-volatile

memory

that will record and store events by time and date of occurrence. This memory is maintained

even when all power is removed from the system. The CP-

3000 is capable of storing 3000 events as

tlined in the memory recall section of this manual. The events can later be viewed in order or

downloaded to a computer via the built in RS

232

port located in the lower right side of the main

circuit board. The on board RS

232 port can also

be used for site specific programming

as well as

down loading system information.

The unit is also compatible with UL

Listed Communicators

making the CWSI CP

3000 a complete

installation solution. Th

e system is designed with monitoring and emergency personnel in mind. The

LCD display

provides easily identifiable pinpoint information displaying the specific initiating device

(s)

in alarm

, trouble

or supervisory

condition. A 21 button membrane switch panel is used for system

control and programming

. The CP

3000 notification appliance circuits are field selectable both for 12

or 24 volt DC and Class A

or B operation.

The CWSI initiating devices

contain microprocessor based transceivers and are battery powered. Bi

directional repeaters are used to create a cellular network type signaling path to and from the

3000 control panel. Initiating devices transmit both status and alarm information. Repeaters process

the data and retransmit the data through the repeater

network to and from devices and the CP

3000

control panel. All tran

smitted signals

are verified for data integrity, signal quality and reception

conformation. The CP-

3000 is responsible for reading all incoming transmission data and deciding

what action if any is to be taken such as displaying information

, sending commands back to repeaters

to activate Notification appliance circuits, HVAC shutdown, Elevator Recall, Tandem smoke detectors

and many other control functions.

The CP

3000 control panel has many new and enhanced features unavailable in previou

s wireless

systems due to recent technological advances. These features and industry advancements are what

make CWSI the unsurpassed leader in the wireless fire alarm

industry.

1.2 Features

1024 device

pability

4 alarm

types

Directional RF communication

900 Mhz Frequency Hopping Spread Spectrum format

CRC data validation

Dual transceiver design

Tandem smoke detector

control

60 hour battery standby time

Field selectable NAC circuits Voltage and Class

1 Class A

12 or 24 Volt DC @ 2 Amps

2 Class B

12 Volt DC @ 2 Amp each or 24 Volt DC @ 1 Amp each

4 N.O. programmable dry contact outputs

2 form C programmable dry cont

act alarm

outputs

2 form C programmable/fixed trouble

outputs

Auxiliary

municipal city box output

320 x 240 backlit LCD display

232

data port

Ethernet

Optional Modem for site data

Real time clock

with daylight savings adjustment

Device enrollment

feature

Password and key lock protected non-

volatile memory

User changeable password

Program

mable from membrane pad or computer

Pinpoint signal identification

History of events for

1000 alarm

signals

1000 supervisory

/trouble

signals

1000 annual test log signals

150 membrane switch presses

Silent or audible walk test

Printable history and maintenance log

4 site specific programmable function buttons

Section 2 – Specifications and Compatibility

2.1 Specifications

Power Source

: 120 VAC 60Hz 4 Amp dedicated circuit.

Batteries

: Two 12Vdc 7Ah sealed lead acid batteries

connected in series for up to 60 hours standby

operation.

Operating Temper

ature

: 32 to 120 degrees F.

Operating Humidity

: 85% non

condensing

Special Application NAC Circuits: Programmable Power Limited. 1 Class “A” (Style Z) or 2 Class “B”

(Style Y) Field selectable.

Cla

ss A

ratings: 12 or 24 Volts DC @ 2 Amps each

Class B

ratings: 12 Volts DC @ 2 Amps each or 24 Volts DC @ 1 Amp each

Dry Contact Alarm Relays:

4 N.O. non

programmable power limited

rated 28 Vdc @ 1 A

mp. resistive.

2 Form “C” programmable power limited

rated 28 Vdc @ 1 Amp. resistive.

Dry Contact Trouble Relays:

2 N.O. non

programmable power limited rated 28 Vdc @ 1 Amp. resistive.

2 N.C. non

programmable

power limited

rated 28 Vdc @ 1 Amp. resistive.

Auxiliary

output: Current 300 ma. Max coil resistance 14.6 ohms.

Data Port: RS

232

–

9 Pin Computer connector.

Ethernet

port connecto

r: RJ

Telco input: RJ

Transceiver Operating Frequency: 900 MHz band.

Antenna

Types: Yagi and Folded Dipole Omni. Max Coax length 20 ft.

Transmission Format

: Frequency Hopping

–

Spread Spectrum.

Dimensions

: 17” high, 17” wide, 3 ¼” deep

Enclosure

: Powder coated 16 gauge steel

Weight

: 29 Lbs.

2.2 Compatibility

The following UL Listed RF devices

are compatible with the CP

3000Control Panel:

Commercial Wireless Systems International, LLC

A/C Repeater Model AR

–

A/C powered repeater

Battery Repeater Model BR

–

Battery powered Repeater

Smoke Detector Model 300

–

Photo Electric Sm

oke Detector with Integral Sounder

Manual Pull Station Model 310 –

Non Coded Fire Alarm Box

Heat Detectors models 320/321 –

Automatic Fixed and Rate of Rise Heat Detector

Fire Transmitter Model 330

–

N.O. EOL Supervised Transmitter

The following antennas

are for use with the CP

3000:

Commercial Wireless Systems International, LLC

Models:

1 Omni, OM

2 Omni, YA

1 Yagi, YA

-2 Yagi

The following UL Listed Digital communicators are compatible with the CP

3000 Control

Panel:

Communicators

are to be determined. They will be activated via dry contact relay outputs

Section 3 - Installation

3.1 Proper Installation Order

The following steps when performed in the li

sted order will result in a trouble

free installation:

Site Signal Survey

Control Panel Installation and Basic Programming

Device and Repeater Enrollment

Control Panel Site Specific Programming

Repeater and Device installation and testing

3.2 Preparing the Installation Site

Prior to the installation of a CP

3000 system a signal survey

must be been performed by a factory

trained technician or authorized dealer. The signal survey

determines the loc

ation of the CP

3000,

repeaters, and initiating device

transmitters. Refer to the CWSI Signal Survey manual and individual

CWSI device manuals for the proper method to conduct a signal survey. The completed survey

becomes the blueprint layou

t for the actual installation.

During the survey try to locate A/C repeaters and CP

-3000 control panel close to available 120 Vac

uninterruptible power. All CP

3000 connections must be installed in conduit. When connecting

primary A/C power always follow

National Fire and Electrical Codes (NFPA

72 and NFPA 70)

Local Electrical and Fire Code requirements

Local AHJ (Authority Having Jurisdiction) requirements

WARNING: Make sure A/C supply is turned OFF prior to connecting the CP

3000

panel.

3.3 Receiving and Unpacking the Equipment

Upon receiving the equipment, the carton should be inspected for damage, which may have occurred

during shipment. Each package should be checked against the packing slip for completeness.

Differences shoul

d be reported to CWSI immediately. If any product is suspected of damage it should

be checked for proper operation or returned to CWSI.

3.4 Installing the CP-3000

WARNING: This equipment must be professionally installed by factory trained personnel. Use

of an antenna

other than listed in the compatibility section of this manual may be harmful to

persons, void FCC or damage the equipment.

After conducting a signal survey

the CP-

3000 can be mounted in it’s intended loca

tion. The following

should be considered and or adhered to when mounting the unit.

–

ALL WIRING SHOUL

D COMPLY WITH NATIONAL AND/OR LOCAL

ELECTRICAL CODES. UN

LESS OTHERWISE SPECI

FIED, WIRE

SHOULD BE18

GAUGE 7 STRAND COPPE

R WITH 600 VOLT INSU

ATION. SHIELDED WIRE

PREFERRED.

–

This unit is intended to be mounted in indoor dry areas. Avoid dusty, wet and corrosive

locations.

Table des matières

Autres manuels CWSI Panneau de contrôle

CWSI

CWSI CP-3500D Manuel utilisateur

Manuels Panneau de contrôle populaires d'autres marques

RDZ

RDZ PC-HRX Manuel utilisateur

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuel technique

Efka

Efka Variocontrol V810 Manuel utilisateur

Cebora

Cebora 208-10 Manuel utilisateur

AMX

AMX AutoPatch CP-15 Manuel utilisateur

Satel

Satel CA-6 KLED-S Manuel utilisateur

Evolution

Evolution IQ plus 800 Manuel utilisateur

Fagor

Fagor 8040 TCO CNC Manuel utilisateur

Trane

Trane ComfortLink II XL950 Control Manuel utilisateur

AKO

AKO PROCool AKO-17635-2 Manuel utilisateur

ABB

ABB 6136/30M-101 Manuel utilisateur

Telikou

Telikou BK-603 Belt Pack Manuel utilisateur

Mapei

Mapei Mapeheat Thermo Touch Manuel utilisateur

Bosch

Bosch D9412GV4 Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuel utilisateur

Sminn

Sminn BOX L VF1L EI Manuel utilisateur

Balboa

Balboa TP600 Manuel utilisateur

Nice

Nice HSCU1 Caractéristiques techniques