Cutler-Hammer EATON PanelMate ControlNet Manuel utilisateur
Eaton Corporation
Cutler-Hammer Group
811 Greencrest Drive
Columbus, OH 43081
PanelMate ControlNet
CommunicationDriver
Manual
The information contained in this manual is the property of Eaton Corporation. Information in this
manual is subject to change without notice and does not represent a commitment on the part of Eaton
Corporation. Permission is granted to duplicate this material without modification only for your use or
the internal use of other members of your company or your agents to assist you in the use and
servicing of products purchased from Eaton’s Cutler-Hammer Group. No permission is granted to
modify this material or include this material in a compilation.
Any Cutler-Hammer software described in this manual is furnished under a license agreement. The
software may be used or copied only in accordance with the terms of the agreement. It is against the law
to copy the software on any medium except as specifically allowed in the agreement.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to restrictions set forth in paragraph
(b)(3)(B) of the Rights in Technical Data and Computer Software clause of DAR 7-104.9(a).
Contractor/Manufacturer is Eaton Corporation’s Cutler-Hammer Group, 811 Greencrest Drive,
Columbus, OH 43081.
TRADEMARKS
PanelMate is a registered trademark of Eaton’s Cutler-Hammer Group.
DOS, Microsoft, and Windows are registered trademarks of Microsoft Corporation.
Commercial names of products from other manufacturers or developers that appear in this manual are
registered or unregistered trademarks of those respective manufacturers or developers, which have
expressed neither approval nor disapproval of Eaton’s Cutler-Hammer Group products.
Copyright Eaton Corporation, 2001. All rights reserved.
Printed in the United States of America.
P/N 01-00484-00
Table of Contents i
Table of Contents
Preface...................................................................................................................................................................P-I
About this Manual......................................................................................................................................P-II
Purpose......................................................................................................................................................P-II
What’s Inside...........................................................................................................................................P-II
Support Services.........................................................................................................................................P-III
Chapter 1: Introduction.......................................................................................................................................1-1
Driver Installation..........................................................................................................................................1-2
Chapter 2: ControlNet Interface Module.........................................................................................................2-1
Hardware Layout...........................................................................................................................................2-2
Address Settings..........................................................................................................................................2-3
LED Indicators...............................................................................................................................................2-4
Net Status...................................................................................................................................................2-4
ControlNet Interface Status.....................................................................................................................2-4
Channel Status..........................................................................................................................................2-4
Connectors.................................................................................................................................................2-5
Chapter 3: Connectivity......................................................................................................................................3-1
Supported Messaging..................................................................................................................................3-2
Network Connection.....................................................................................................................................3-2
Network Termination................................................................................................................................3-2
Connectivity Options...................................................................................................................................3-3
One Operator Station to One PLC..........................................................................................................3-3
Multiple Stations to Multiple PLCs........................................................................................................3-3
PLC Modules.................................................................................................................................................3-4
Operator Station Connection to ControlNet using the ControlNet Interface Module...................3-4
Wiring Guidelines ..........................................................................................................................................3-4
Chapter 4: Memory Addressing and Communications to Allen-Bradley PLC-5 Using DF1 (PCCC)
Messaging .............................................................................................................................................................4-1
PCCC Memory Addressing.........................................................................................................................4-2
General Format...........................................................................................................................................4-2
I/O Format..................................................................................................................................................4-6
Status Format.............................................................................................................................................4-6
Memory Addressing Examples...............................................................................................................4-7
Chapter 5: Memory Addressing and Communications to the Allen-Bradley ControlLogix Using
Control Information Protocol (CIP) Messaging.............................................................................................5-1
CIP References ...............................................................................................................................................5-2
ControlNet Messaging..................................................................................................................................5-3
ControlLogix Addressing.............................................................................................................................5-3
ControlLogix Addressing Using PLC-5 or SLC Address Syntax............................................................5-4
Controller Tags versus Program Tags........................................................................................................5-5
CIP Memory Addressing..............................................................................................................................5-5
Appendix A: Error Codes...................................................................................................................................A-1
ii PanelMate ControlNet Communication Driver Manual
ControlNet Interface Peer Error codes......................................................................................................A-2
System Errors............................................................................................................................................A-2
Local Errors...............................................................................................................................................A-3
Index.........................................................................................................................................................................I-1
Preface I
Preface
Welcome to Cutler-Hammer’s PanelMate ControlNet Communication Driver Manual. This chapter
gives a brief overview of this manual, and provides information on Support Services.
II PanelMate ControlNet Communication Driver Manual
About this Manual
Purpose
This manual describes how to use your Operator Station with ControlNet.
What’s Inside
This manual is organized in the following way:
Preface
Chapter 1: Introduction, describes the ControlNet driver installation.
Chapter 2: ControlNet Interface Module, describes the hardware layout of the ControlNet
Module, as well as a description of the LED indicators and their behaviors.
Chapter 3: Connectivity, describes supported messaging, how the ControlNet module
connects to the network, the connectivity options, how to configure the PLC Name
and Port Table in PanelMate software, and wiring guidelines.
Chapter 4: Memory Addressing and Communications to the Allen-Bradley PLC-5 Using DF1
(PCCC) Messaging, describes PCCC references, memory addressing for the PLC-5,
and monitored I/O.
Chapter 5 Memory Addressing and Communications to the Allen-Bradley ControlLogix
Using Control Information Protocol (CIP) Messaging, describes CIP references
and memory addressing for ControlLogix PLCs.
Appendix A: Error Codes, describes ControlNet Peer Error Codes.
Index Alphabetical listing of important names, subjects, and titles found within this
manual, with their page numbers.
Preface III
Support Services
It is Cutler-Hammer’s goal to ensure your greatest possible satisfaction with the operation of our
products. We are dedicated to providing fast, friendly, and accurate assistance. That is why we offer
you so many ways to get the support you need. Whether it’s by phone, fax, modem, or mail, you can
access Cutler-Hammer support information24 hours a day, seven days a week. Our wide range of
services include:
Technical Support VOICE 1-800-809-2772
FAX 614-882-0417
EMAIL [email protected]
If you are in the U.S. or Canada, you can take advantage of our toll-free line for technical assistance
with hardware and software product selection, system design and installation, and system debugging
and diagnostics. Technical support engineers are available for calls during regular business hours
(8 am - 5:30 pm EST) by calling 1-800-809-2772. International calls can be made to either the Tech Line at
1-800-809-2772 (toll call) or the Cutler-Hammer main business line at 614-882-3282. You can contact our
technical support engineers by faxing your support requests directly to the Advanced Product Support
Center (APSC) located in Columbus, Ohio at 614-882-0417. You can also contact our technical support
Emergency Technical Support VOICE 1-800-809-2772
Because machines do not run on a nine-to-five schedule, we offer emergency after-hours technical
support. A technical support engineer can be paged for emergencies involving plant down situations or
safety issues. Emergency support calls are automatically routed directly to our answering service
after-hours (5:30 pm - 8 am EST) and weekends. For emergency technical support, call 1-800-809-2772.
Note that the Emergency Technical Support phone number does not currently support product repairs
or shipping outside normal business hours.
Information Fax-Back Service FAX 614-899-5323
The latest Cutler-Hammer product information, specifications, technical notes and company news is
available to you via fax through our direct document request service at 614-899-5323. Using a touch-
tone phone, you can select any of the info faxes from our automated product literature and technical
document library, punch in a fax number and receive the information immediately.
If you have Internet capabilities, you also have access to technical support via our website at
http://www.cutlerhammer.eaton.com/automation. The website includes technical notes, frequently
asked questions, release notes, and other technical documentation. This direct technical support
connection also offers you the ability to request assistance and exchange software files electronically.
Bulletin Board Service MODEM 614-899-5209
Parameters: 8 data bits, 1 stop bit, parity none, 9600-28.8K baud
If you have modem access, you can dial in directly to our electronic bulletin board service for the latest
product and company information. File sharing, product software downloads and our user message
service are just a few of the things you will find online at 614-899-5209.
IV PanelMate ControlNet Communication Driver Manual
Software Registration FAX 614-899-4141
EMAIL [email protected]
Register your software and receive free information updates regarding Cutler-Hammer products.
Information will include details of software modificatioins, product enhancements, and reduced-price
software upgrades. Registering your software also gives you access to Technical Support. You can
register your software by using the registration form included with the software kit.
If you have Internet capabilities, you can register your software via our website at
http://www.cutlerhammer.eaton.com/automation. Select “Tech Support” then “Automation Update
Service”. Go to the Software Registration Form, fill it in and then submit the form.
Repair and Upgrade Service VOICE 614-882-3282 ext. 7601
FAX 614-882-3414
Our well-equipped Customer Service department is ready to assist you with repairs, upgrades, and
spare parts services. If a situation arises where one of these services is needed, just call 614-882-3282
x7601 or fax 614-882-3414.
Customer Support Center VOICE 1-800-356-1243
FAX 1-800-752-8602
Authorized Cutler-Hammer distributors and Cutler-Hammer sales offices can get assistance for
Cutler-Hammer standard and component product lines through the Customer Support Center. Call
the Customer Support Center for the following assistance:
1. To place an order.
2. Stock availability, proof of shipment.
3. Expedite an existing order.
4. Product assistance and product price information.
5. Product returns other than warranty returns.
6. Information on local distributors or sales offices.
Address Eaton Corporation
Cutler-Hammer Group
811 Greencrest Drive
Columbus, OH 43081
Chapter 1: Introduction 1-1
Introduction
This chapter discusses:
•Driver installation
1
1-2PanelMate ControlNet Communication Driver Manual
Driver Installation
The Driver Software Kit contains a CD-ROM.
Caution: Before installing the drivers, make sure that the PanelMate Configuration software is not
already running.
To install the drivers from the CD-ROM, select the Install Software option and then Install Drivers.
From the dialog box, select the ControlNet driver you wish to install and then press the OKbutton.
Table des matières
Autres manuels Cutler-Hammer Contrôleurs
