Curtis LCD1105A Manuel technique
LCD Color digital TV receiver
LCD1105A
Operation Instruction
NOTE: THIS UNIT IS NOT MEANT TO BE USED IN A MOVING VEHICLE.
ATSC DIGITAL TUNERS DOES NOT RECEIVE SIGNAL WHEN IN MOTION.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Contents
I Precautions
II Accessories
III Appearance
IV Description of Panel Buttons
V Remote Controller Directions
VI Basic Operation
VII TV Menu Operation
6.1. TV/AV Image Quality Adjustment
6.2. Sound Adjustment
6.3. Time Adjustment
6.4. Settings
6.5. Program Searching
VIII To Receive Clear Images
IX Before Repair
X Technical Parameter
XI Stand Assemble Instruction Manual
1
2
3
4
5
7
8
8
9
9
10
12
15
16
17
18
I Precautions
1. Keep this product away from extremely hot or cold places. The
storage temperature ranges from -40 to 60 and the working
temperature from -5 to 40 .
2. Do not use this product at damp environment like bathtubs, wash
basins, kitchens, washtubs, as well as basements, swimming pools
or similar places.
3. Do not expose your TV set to high humidity, dust or oil smoke.
4. Do not throw or drop this product.
5. Do not subject this device to the inside of a case or strong vibrations,
avoiding strong collision.
6. Do not push on or scrub this product with sharp objects.
Storage
Maintenance
1. Disconnect all cables of this device at first before cleaning.
2. Wipe the enclosure, screen and keys using soft cloth with a little
soft detergent on.
3. Do not use polishing cloth, abstergent, and all types of propellants or
chemical detergents like alcohol and benzene to clean your device.
Special Notice
Bright spots or dark spots may appear on the screen. This is a
normal phenomenon associated with the active matrix display
technology and is not a sign of malfunction. Do not attempt to
maintain. For any failures, please turn off your TV set immediately
and contact us or your dealer. This device integrates a great deal
of fine electronic components. Disassembly or alternation may
result in damages or breaks.
1. Do not watch television programs or turn your TV set on for your
own and others' safety.
2. It is very dangerous to watch television programs or operate the
TV set while driving.
Warning!
-1-
* Open the package and make sure all the items are included.
II Accessories
1. Car adapter
2. AC adapter
3. AV conversion cable
4. Remote control
5. AAA type batteries
6. Telescopic antenna
7. 75 ohm antenna conversion cable(screw connector)
8. User manual
-2-
III Appearance
-3-
1. Loudspeaker
2. TFT-LCD Screen
3. Control Panel
4. Remote-control receive
window
5. Power indicator
Red: Standby
Green: Power-on
6. Power: power on/off
7. Antenna Input Jack
8. AV2 IN Input
9. AV1 IN Input
10. Earphone Jack
11. 12V DC Power Jack
IV Description of Panel Buttons
1. MENU: Menu button, press to show
the main menu. When system enters
a multilevel submenu, press to return
the previous menu step by step.
2. CH+ : Upward selection/Channel
increasing.
3. CH- : Downward selection/Channel
decreasing.
4. VOL+ : Rightward selection/For volume increasing.
5. VOL- : Leftward selection/For volume decreasing.
6. SOURCE: TV,AV1,AV2 switch.
7. MTS: Language switch button, press to adjust among different
languages.
8. AUDIO: Audio mode button, press to choose among the four audio
modes, Standard, Music, Movie, Personal.
9. EPG: press to show the program guide menu. ( ATSC mode )
10. PRLIST: TV program menu key, press to see the entire program
list in a program list box.
11. CC: Close/Open caption.
12. INFO: Press to show the information of present program.
-4-
V Remote Controller Operation Instruction
-5-
1
2
4
8
9
11
12
13
14
15
16
17
18
310
AAA
AAA
1. CH+/CH- (Program choosing key, up and down direction key):
Press CH+ key to increase the channel by degree. Press this key
and choose menu upward if it is in the system menu.
Press CH- key to decrease the channel by degree. Press this key
and choose menu downward if it is in the system menu.
2. VOL+/VOL- (Volume control key, left and right direction key)
Press VOL+ to turn up the volume. Press this key to choose menu
rightward if it is in the system menu.
Press VOL- to turn down the volume. Press this key to choose
menu leftward if it is in the system menu.
3. TV/AV Switch Key: When pressing this key, you switch state among
TV, AV1 and AV2.
4. MUTE (Mute Key): When you press this key, the sound will
disappear, and press again or press VOL+ the sound will return
to normal.
5. 0, 1, 2, 3, ... 9: Program Direct Choosing Key. Press this key to
choose program number.
6. : Press this key to execute channel direct choosing transform
function.
7. CC: Close/Open Caption
8. MTS: When pressing this key, you can adjust among different
languages.
7
5
6
-6-
9. MENU: Menu key. When you press this key, the main menu will
display. When the system enters a multilevel submenu, press this
key and return to previous menu step by step.
10. PRLIST: TV program menu key. When pressing this key, you will
see the entire program list in a program list box.
11. POWER (Power Switching Key): When you press this key, the
TV set will be turned off, and press again it will be turned on.
12. EXIT: Exit Key. Press this key, exit operation and return to the
program.
13. PICT: Image Mode Key. Press this key to choose among the four
image modes of Standard, Dynamic, Soft and Personal.
14. AUDIO: Audio Mode Key. Press this key to choose among the four
audio modes of Standard, Music, Movie, Personal.
15. INFO: When you press this key, the system will show the message
of present program.
16. EPG: When you press this key, the system will show the program
guide menu(ATSC mode).
17. : Return Key. Press this key to return to last program you were
watching and press again to return to current program.
18. FORMAT: When pressing this key, you can choose among Normal
and Wide image display formats.
VI Basic Operation
2. Connection Of External Antenna:
Align one end of the attached
external antenna cord plug with
the external antenna jack, and
the other end to connect the
external antenna head.
AV transforming wire
1. Connection of Power Supply:
Align the power supply plug on
AC adapter with the jack on the
machine rear cover marked with
DC.
-7-
75 external antenna cord
3. Connection of AV convert Cable:
Insert the external video cord into
the yellow port of the AV convert
cable, the left sound track into the
white port and the right sound track
into the red port. Then plug the AV
convert cord in AV1 IN or AV2 IN
jack.
VII TV Menu Operation
-8-
1. There are four options of picture mode, which are Personal,
Standard, Dynamic and Soft.
2. Contrast: Adjust the black and white contrast of the image
3. Brightness: Adjust the brightness of the image
4. Color: Adjust the color of the image
5. Sharpness: Adjust the sharpness of the image
6. Tint: Adjust the red and green balance of the image
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
UP/DOWN ADJUST "MENU": EXIT
Personal
50
50
50
50
0
7.1. TV/AV Image Quality Adjustment
Press MENU key to enter the menu list and then press left or right key
to enter the above list. Press up and down key to choose to enter the
sub-list, press left and right key to adjust the numerical value or setup
the contents, then press Menu to confirm and return to previous list.
Press Menu again or press EXIT key on the remote controller to quit
the sub menu list directly after the adjustment of image quality.
Precautions
Table des matières
Autres manuels Curtis Récepteur TV
