Culer AC100 Manuel utilisateur

Rev. 1/15 AC100/200 series 1

Space Cooler

Model Series: AC100 & AC200

Owner’s Manual

READ AND SAVE THESE INSTRUCTIONS

CAUTION:

Before using this product, read this manual and follow all safety rules and operating instructions.

Failure to comply with instructions could result in personal injury and/or property damage.

IMPORTANT:

For replacement parts or operating questions go to www.culer.com or call 1"800"320"6478.

Rev. 1/15 AC100/200 series 2

SECTION PAGE

1. Safety Information …………….……………………………………………………….…….……..

2. Carton Contents……………………………………………………………………….….…….…...

3. General Assembly Instructions ……………………………………….……………………....…..

4. Operation Instructions…………………………………….……………..……………..……....…..

5. Maintenance………………………………………………………………….………………....…..

6. Storage…………………………..…………………………………………….……………......…...

7. Troubleshooting…………………………..…………………………………….…………..…..……

8. Parts List………………………….……………………….….……………..................................

9. Warranty ……………..……………………………………………….………...……………..….....

READ AND SAVE THESE IMPORTANT SAFETY

INSTRUCTIONS

SAVE THIS MANUAL FOR FUTURE REFERENCE.

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

Read and understand this instruction manual and all labels on the Space Cooler before using.

Safety is a combination of common sense, staying alert and knowing how this product works. Use the

product only as described in this manual. To reduce the risk of personal injury or damage to the Space

Cooler, use only recommended accessories.

Understanding Safety Terminology

DANGER: If safety information is not followed, someone will be seriously injured or killed.

WARNING: If safety information is not followed, someone could be seriously injured or killed.

CAUTION: If safety information is not followed someone may be injured.

When using this product follow basic safety precautions including the following:

WARNING: To reduce the risk of fire, electric shock, or injury:

1. Make sure that the power source complies with the electrical requirements of the product.

2. Do not store outdoors. (See storage section)

3. Do not use this product with a damaged or missing filter.

4. To reduce the risk of personal injury, the product should not be used as a toy or placed where children

can reach it. Close supervision is necessary when any appliance is used near children.

Table of Contents

Safety Warnings

Rev. 1/15 AC100/200 series 3

5. Use this product only as described in this manual. Any other use may cause electrical shock, fire, and

injury to people or animals.

WARNING: DO NOT USE THE ON-OFF BUTTONS AS A MEANS OF DISCONNECTING POWER

WHEN SERVICING THIS PRODUCT. ALWAYS DISCONNECT THE POWER CORD.

6. Disconnect the power cord before moving or performing any maintenance on the product.

7. This product shall not be used in potentially dangerous conditions, such as flammable, explosive or

chemically loaded atmospheres.

8. Do not use or store near hazardous materials.

9. If the product is not working correctly, has missing parts, has been dropped, damaged or dropped in

water, call an authorized service center for evaluation, adjustment or repair.

WARNING: IMPROPER CONNECTION OF THE EQUIPMENT-GROUNDING CONDUCTOR CAN

RESULT IN A RISK OF ELECTRICAL SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE

PERSON IF YOU ARE IN DOUBT AS TO WHETHER THE OUTLET IS PROPERLY GROUNDED. DO NOT

MODIFY THE PLUG PROVIDED WITH THE PRODUCT IF IT WILL NOT FIT THE OUTLET; HAVE A

PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. DO NOT USE A THREE-PRONG TO

TWO-PRONG ADAPTER. IMPROPER CONNECTION MAY CREATE A RISK FOR ELECTRICAL SHOCK.

10. To protect against electrical shock, do not immerse unit, plug, or cord in water or spray with liquids.

11. Keep the power cord away from heated surfaces.

12. Do not leave the product unattended when it is plugged in. Turn off the product before unplugging.

13. Do not operate the product with a damaged power cord, plug, or if the product is damaged in any

manner. Call an authorized customer service center for evaluation, adjustment or repair.

14. Do not run cord under carpets. Do not cover cord with throw rugs, runners, or similar coverings. Do

not route cord under furniture or appliances. Place power cord away from traffic area and where it will

not be tripped over.

15. Do not insert or allow any foreign objects to enter the intake or exhaust air openings, as it may cause

mechanical, electrical, or fire damage to the product.

16. Do not block or tamper with the cooling nozzles, as it may reduce or impede the functionality or

performance of the product. Call an authorized customer service center for evaluation, adjustment or

repair.

17. Never place the product where it may fall into a water reservoir (example: bathtub or pool), or

anything containing an electrically conductive substance.

18. This product must be grounded. If it should malfunction or break down, grounding provides a path of

least resistance for electric current to reduce the risk of electric shock. Plug into an appropriate

ground fault circuit interrupter (GFCI) protected outlet that is properly installed and in accordance with

all local codes and ordinances.

19. Do not hang or mount the product on a wall or ceiling.

20. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on power

cord.

21. Risk of fire. Do not replace the provided power supply device. Only use certified power supply rated

for this product. Discard product if the attachment plug is damaged.

Rev. 1/15 AC100/200 series 4

Pack List QTY.

1.Space Cooler 1

2.Power Supply 1

3.Owner’s Manual 1

We made this section as easy as possible for you!!!

NO ASSEMBLY REQUIRED!!!

1. Fill your new Space Cooler with clean water

2. Connect the provided power supply to the unit and then connect the power supply to a GFCI

protected 120v 60Hz rated outlet.

3. You are now ready to go!!!

IMPORTANT-BEFORE STARTING:

Read this owner’s manual in full before operating this product. This product is

designed to operate with clean water.

Place the product on a level surface near a GFCI protected electrical outlet. Place the product out of

reach of children. Do not insert anything into the fan guards. If moving the product to a different location,

turn it OFF and unplug it from the outlet.

!Clean and clear any dirt or dust from the space cooler to prevent water contamination.

Carton Contents

General Assembly Instructions

Operating Instructions

Check packing contents to pack list. If anything is missing

please call Customer Service at 1-800-320-6478.

Cooling Dial

Rev. 1/15 AC100/200 series 5

SPACE COOLER OPERATION

Cooling ON

1. Open and fill water tank (use clean water only) to the bottom of the fill basket. DO NOT OVER FILL,

then replace water cap. (Important: Fully tighten tank cap to ensure proper cooling function)(fig. 1).

Overfilling could cause water streaming during shutdown.

2. Plug the power supply DC Jack into the power port on the unit (fig. 2).

3. Plug the power supply into a GFCI protected 120v 60Hz rated outlet. (fig. 3).

4. Press the power button to turn on the product (fig 4). The fan speed will start on low speed.

5. Press the fan button incrementally to increase the fan speed (low, med, high) (fig 5).

6. Turn on the cooling function by pressing the cooling button (fig 6).

7. It’s recommended to fully close the Cooling Dial by turning to the right then open it by turning to the left

1-2 full turns. This will help speed up the priming process. Please allow up to 1 minute for priming.

8. Once atomization is visible, adjust to your desired comfort level by turning the cooling dial left or right in

very small increments. (Refer to ADJUSTING COMFORT LEVEL section, to get optimal cooling

performance) (fig. 6).

9. The cooling port(/s) can be rotated up to 90º from center in the left or right directions (fig. 7).

10. The cooling port(/s) can be tilted up to 30º from center vertically (fig. 8).

Cooling OFF

1. The cooling function can be turned off by pressing the cooling button (fig. 6).

2. Pressing the power button will turn off all functions. (fig. 4).

Note: The space cooler will continue to atomize for a short time while the unit depressurizes

ADJUSTING COMFORT LEVEL

CAUTION: Do not over tighten and/or loosen the cooling dial.

The cooling function of this product is adjusted by turning the cooling dial on the space cooler control panel to

the right or to the left. It may take a minute for cooling to start. It is normal for air to come out of the nozzles

before the cooling begins.

To optimize the cooling effectiveness of your space cooler, you can operate the unit with low or high

atomization, based on your comfort preference.

!Increase the density by turning the cooling dial to the left.

!Decrease the density by turning the cooling dial to the right.

Operating Tips

For dry climates, increasing the cooling density will provide maximum cooling results. In humid climates, a

reduced cooling density is recommended.

Rev. 1/15 AC100/200 series 6

CUSTOMER RESPONSIBILITIES

Read and follow the maintenance schedule and the maintenance procedures listed in this section.

WARNING: ALWAYS UNPLUG THE POWER CORD BEFORE MOVING OR SERVICING THE

PRODUCT. DO NOT IMMERSE THE PRODUCT IN WATER!

REPLACING FILTERS

WARNING: ANY SERVICING OF THIS UNIT, EXCEPT FOR GENERAL MAINTENANCE

DESCRIBED IN THIS SECTION, SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE

REPRESENTATIVE.

CAUTION: The filters have been designed to provide optimal system performance by catching

any debris that may enter the supply lines throughout use. Semi annual replacement of both the air

and water filters ensures the life of your system.

1. Remove the filter access doors to locate the air and water filters (fig 9).

2. The filters are connected to the system via “Push-In” connectors for ease of service.

3. Push the connector ring and pull out the air filter hose from the push-in connector, and the water filter

hose from the push-in connector (fig 10).

4. Dispose of old filter. Always dispose of waste according to local law.

5. Remove new filter from package and insert into the filter housing.

6. Push the hose into the push-in connectors to connect the filters (fig.10). Be sure to fully insert the hose

into the connector.

7. Reconnect power and test system for water leaks.

8. Reinstall filter access door (fig.9).

Maintenance

Rev. 1/15 AC100/200 series 7

CAUTION: DO NOT USE GASOLINE, THINNER, ALCOHOL, SOLVENTS OR OTHER HARSH

CLEANNERS OR CHEMICALS TO CLEAN THE PRODUCT. THEY WILL DAMAGE THE PRODUCT.

•Clean the space cooler with a soft cloth and mild soap solution.

•Dry all parts completely.

•Store the product in a clean and dry place.

•DO NOT STORE SPACE COOLER WITH WATER IN THE SYSTEM

EMPTYING WATER TANK

• Unplug the product from the power supply.

• Remove the water tank fill cap.

• Carefully turn the product over to allow water to drain out

• Replace fill cap and hand tighten.

• Plug the product in and run cooling function until the cooling can no longer be seen.

CLEANING BASKET FILTER

• Remove fill cap and carefully remove any debris

CONDITIONING WATER TANK

Conditioning the water tank ensures that the cooling system will operate at optimal levels throughout the life of

the system. It is suggested that the tank be conditioned at an interval of every 4th filling or once/month;

whichever comes first.

• Completely drain water tank. (See Emptying Water Tank)

• Fill tank with CLEAN WATER.

• Add a few drops unscented chlorine bleach to the water tank (approximately 5 drops per gallon of clean

water).

• Replace cap and hand tighten.

• Run system for 5 minutes with high density cooling then adjust to your personal comfort level.

• The system is conditioned and ready for operation.

Storage

Rev. 1/15 AC100/200 series 8

PROBLEM

CAUSE

CORRECTION

Fan not running

1. Power cord is not connected

1. Connect power cord

2. Power Button is in the “OFF” position

2. Depress & release the power

button one time

Unit not cooling

1. Cooling button is in off position

1. Depress & release the cooling

power button one time

2. Water tank is empty

2. Fill tank with clean water

3. Cooling Dial is in the ”CLOSED” position

3. Open Cooling Dial (turn to the left)

4. Water filter could be clogged

4. Replace water filter

5. Air tank leak

5. Tank fill cap is not tight

Water

streaming from

nozzle/s during

operation

1. Air flow is low

1. Check all filter hose connections

for air leaks

2. Air filter needs replacement

2. Replace air filter

3. Foreign object in nozzle

3. Order and replace nozzle

Water

streaming from

nozzle/s during

shutdown

1. Water tank is overfilled

1. Open tank cap to release

pressure. Drain tank to bottom of

fill basket. Replace Cap. During

next start up the cooling function

may stream water for a few

seconds until the lines have been

cleared. Then normal operation

will return.

Mist is not

balanced on

both nozzles

(AC200 series

only)

1. Low water flow

1. Adjust the Cooling Dial

2. Low water level

2. Check water level and fill if needed

3. Water hose leaks

3. Check assembly to ensure hoses

are routed installed correctly.

Troubleshooting

Rev. 1/15 AC100/200 series 9

1 FULL YEAR

WARRANTY

The space cooler is warranted for one year from the date of purchase against defects in materials and

workmanship. At our discretion, parts that prove to be defective will either be repaired or replaced, or the

whole product will be replaced. In either case, a copy of your proof of purchase will be required.

In case that any mechanical or electrical repairs are required during the warranty period, send your

complete product, postage or freight prepaid to the Culer customer service center near you. Call the

number below to get the nearest service center.

This warranty does not include the air or water filters, which are expendable parts that can wear out from

normal use within the warranty period. This warranty applies for only 90 days if this product is ever used

for commercial or rental purposes.

The serial number, model number and manufacturing date code can be found on the label attached to the

back of the unit.

You should record these numbers and the date of purchase and keep in a safe place for future reference.

MODEL NUMBER: XXXXX

MFG DATE CODE: XXXX

SERIAL NUMBER: XXXXXX

DATE OF PURCHASE: XX-XX-XX

CUSTOMER SERVICE NUMBER: 1-800-320-6478

Website: www.culer.com

Thank you for your purchase!!!

No.

Part No.

Description

QTY

AM15PMMR-1-002

Air/Water Filter

AM15PMMR-1-003

Air Filter Access Door

AM15PMMR-1-004

Water Filter Access Door

AM15PMMR-1-005

Power Supply

AM15PMMR-1-006

Fill Cap

Warranty

Parts Reorder List

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Culer Climatiseur

Culer

Culer SOLO Manuel utilisateur

Manuels Climatiseur populaires d'autres marques

Spheros

Spheros CC 355 Manuel utilisateur

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuel utilisateur

Panasonic

Panasonic CS-E12HKEW Manuel utilisateur

nedis

nedis ACMB1WT7 Manuel utilisateur

Samsung

Samsung AR KV Series Mode d’emploi

Daikin

Daikin FCFV50A Manuel utilisateur

Fujitsu

Fujitsu Inverter ASBA30JFC Manuel utilisateur

Toshiba

Toshiba RAS-M10SMUV-E Manuel utilisateur

Daikin

Daikin FXLQ20MAVE Manuel utilisateur

Hitachi

Hitachi RAS-E24CAK Manuel utilisateur

CIAT

CIAT Magister 2 Series Mode d’emploi

Bestron

Bestron AAC6000 Manuel utilisateur

Hisense

Hisense 7K Manuel technique

Frigidaire

Frigidaire FFRE0533S1E0 Manuel utilisateur

Samsung

Samsung AS09HM3N Manuel utilisateur

Frigidaire

Frigidaire CRA073PU11 Manuel du propriétaire

Soleus Air

Soleus Air GB-PAC-08E4 Manuel utilisateur

McQuay

McQuay MCK020A Manuel utilisateur