Cudy RE1200 Manuel utilisateur
RE1200
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –11
Čeština
12 –20
Slovenčina
21 –29
Magyar
30 –38
Deutsch
39 –48
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Method One: Using WPS Button
1. Plug the extender next to your router and wait until the LED turns solid on.
2. Press the WPS button on your router, and then press the WPS button on the
extender withing 2 minutes.
3. Then the LED will start to flash, wait until the LED and LED turn solid
on, which means the extender connects to your existing host WiFi network.
If the LED does not turn solid on after 2 minutes, try step 2 again. If still not work, try
Flash
Solid On
Press 1 second
Connection proccess
Flash
Pairing proccess
Solid On
Flash
Solid On
5
4. Connect your device to the extenders WiFi network.
The extender’s new WiFi network name is based on your Host WiFi network name, with
—EXT2G or —EXT5G at the end of the name.
For example:
•Host Wi-Fi network name:
YourNetWorkName
•New extended Wi-Fi network name:
YourNetworkName—EXT2G
YourNetworkName—EXT5G
Use the same Wi-Fi password that you use for your Wi-Fi router.
5. Relocate the extender halfway between your router and the Wi-Fi dead zone,
find a good place to plug it according to the LED.
Red Flash: Connecting / not connected to host Wi-Fi
Solid Red: Connected, signal is weak
Solid Purple: Connected, signal is fair
Solid Blue: Connected, signal is strong
Enjoy the internet!
Router
Extender
Clients
Host WiFi Network
Halfway
Extended Network
6
Method Two: Using Web browser
1. Plug the extender next to your router and wait until the LED turns solid on.
Connect your computer or smartphone to the extenders network Cudy-Extender
2. Then below window will pop up, use admin for password to log in.
Note: If the login window does not appear,Launch a web browser, and enter
http://cudyre.net/ or http://192.168.10.254/ in the address bar. Use admin for password
to log in. If still not work, please refer to FAQ > Q1.
Select Wireless Extender, then click Next.
Flash
Solid on
7
3. Relocate the extender halfway between your router and the Wi-Fi dead zone,
find a good place to plug it according to the LED.
Red Flash: Connecting / not connected to host Wi-Fi
Solid Red: Connected, signal is weak
Solid Purple: Connected, signal is fair
Solid Blue: Connected, signal is strong
LED and Button
LED
Colour
Status
Indication
/
Off
No host Wi-Fi configuration
Red
Flash
Connecting / not connected to host Wi-Fi
On
Connected to host Wi-Fi, signal is weak
Purple
On
Connected to host Wi-Fi, signal is fair
Blue
On
Connected to host Wi-Fi, signal is good
/
Off
Not connected to host Wi-Fi
Blue
Flash
The system is booting or upgrading
On
System startup is complete
/
Off
Not connected to host Wi-Fi
Blue
Flash
WPS in progress
On
Connected to host Wi-Fi
Reset
Long press for 2
seconds
Press and hold Reset button for 2 seconds until all
the LED lights turn on and off.
WPS
Press to take
effect
Press the WPS button until WPS LED start flashing.
Extender
Router
Clients
Halfway
Host WiFi Network
Extended Network
8
FAQ
Q1: What can I do if the login window does not appear?
A1: If your computer is wirelessly connected, make sure that you have connected to the
extenders SSID.
A2: If your computer is connected via an Ethernet cable, please make sure that the
connection is stable.
A3: Make sure your computer is set to obtain an IP address and DNS server address
automatically.
A4: Verify that http://cudyre.net ( or http://192.168.10.254/) is correctly entered in the
web browser and press Enter
A5: Reset the device and try again
Q2: What should I my handy cannot find Wi-Fi signal?
A: Please make sure the device is connected, power on. If everything is normal but still
no signal, please try to use computer to set, or restore the extender to factory settings. If
after restoring factory settings but still no signal, you can restart the extender, if it still
doesn’t work, maybe the device has fault.
Q3: How to Reset to default?
A: While the power is still on, keep pressing the Reset button for 2 seconds, and wait for
1-2 minutes for it to restart.
9
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation, and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport,
cleaning by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
10
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Wi-Fi router
Model / Type: Cudy-RE1200
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/53/EU
Directive No. 2009/125/EC
Directive No. 2011/65/EU as amended 2015/863/EU
Prague
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Cudy Extenseur
