CSL Eickhoff Manuel utilisateur

Eickhoff Diagnostic Charging Station 1 / 30 November 2015 –Issue 1.6

Eickhoff Diagnostic Charging Station

User Manual

Issue 1.6

(New Bluetooth module and Software)

Controlled Systems Limited

Ryder Close, Swadlincote, Derbyshire. DE11 9EU. England

TEL: +44 (0)1283 216231 / FAX: +44 (0)1283 552937 / sales@controlledsystemsltd.co.uk

CSL

Eickhoff Diagnostic Charging Station 2 / 30 November 2015 –Issue 1.6

Table of Contents

1Features ........................................................................................3

1.1 Eickhoff Diagnostic Charging Station Overview......................................3

1.2 Eickhoff Diagnostic Charging Station Features ......................................3

2Description.....................................................................................4

3Connections...................................................................................5

4Installation .....................................................................................7

5Operating the Diagnostic Charging Station....................................8

5.1 Powering Unit On ...................................................................................8

5.2 A Search for Bluetooth devices begins...................................................9

5.3 Select which Handsets are required.....................................................10

5.4 Screen showing connected handsets...................................................11

5.5 Testing for correct operation of handset keys.......................................12

5.6 Radio Handset Display Highlighted ......................................................13

5.7 Updating Radio Handset Software .......................................................14

5.8 Updating the Radio Handset Font Chip................................................17

5.9 Updating Radio Handset S/N and H/W Versions..................................19

5.9 Turning off a Radio Handset.................................................................21

5.10 Wire bound handset display.................................................................23

5.11 RF Power Sensor.................................................................................24

5.12 Using VNC Connectivity over Ethernet.................................................26

5.13 Updating Diagnostic Station S/W and adding new .hex Files...............26

5.14 CANBUS / MK2 Machine Radio C515184 Test ………………………....28

6Mechanical Details.......................................................................30

7Environmental..............................................................................30

8Maintenance................................................................................30

9Waste Removal Information.........................................................30

Eickhoff Diagnostic Charging Station 3 / 30 November 2015 –Issue 1.6

1 Features

1.1 Eickhoff Diagnostic Charging Station Overview

15” 1024 x 768 SVGA colour display with touch screen

Six radio handset charging ports

Wire bound connector for testing wire bound handset

12 Volt auxiliary supply output terminals

Integrated Bluetooth RF power meter

Network connectivity via 10/100 Ethernet port

CANBUS test port

USB port

1.2 Eickhoff Diagnostic Charging Station Features

Search for radio handsets and display up to six on the colour display. The

radio handsets need to be on charge for the search to be successful.

Charge up to six radio handsets at once.

Update software versions in handsets and receiver.

Update fonts.

Update serial number and H/W version

VNC connectivity available over Ethernet.

Update future diagnostic charging station software versions using USB or

Ethernet (VNC).

Radio handset display shows:

Online status

Battery status

Battery voltage, charging current and temperature

Serial number

Bluetooth address

Software version and (hardware version)

Eickhoff Diagnostic Charging Station 4 / 30 November 2015 –Issue 1.6

2 Description

The internal power supply unit will operate correctly with an external supply

between 90 –264 volts and 47 –63 Hz

The Diagnostic Station is powered by an Intel core2 duo processor

incorporated inside the unit.

The unit is equipped with a touch screen for easy onsite operation, negating

the need to use a keyboard or mouse for every day testing.

Radio handsets are detected during a search when they are on charge.

Eickhoff Diagnostic Charging Station 5 / 30 November 2015 –Issue 1.6

3 Connections

The external connections on the right hand side of the unit are shown below:

The external connections on the left hand side of the unit are shown below:

RF Power meter connector

BT antenna

12v DC output

Ethernet port

CANBUS ‘D’ connector

USB port

Radio Handset charging connectors

Wire bound handset

socket

Eickhoff Diagnostic Charging Station 6 / 30 November 2015 –Issue 1.6

Cooling Fan

ON / OFF Switch

Power IEC Socket

(Fuse Holder Below)

Eickhoff Diagnostic Charging Station 7 / 30 November 2015 –Issue 1.6

4 Installation

The Diagnostic Station is only to be installed in a clean dry room and is

NOT intended for external use.

The unit is NOT designed to be used in hazardous areas

The parameters of the external power supply must fall within the range

detailed in “Description” above. The unit must be connected to earth.

This apparatus must only be installed or replaced by a competent person.

Ventilation to and from the unit must not be restricted

The operators should be trained in the safe use of the equipment, such

that operational hazards arising from misuse are avoided.

Eickhoff Diagnostic Charging Station 8 / 30 November 2015 –Issue 1.6

5 Operating the Diagnostic Charging Station

5.1 Powering Unit On

The unit is powered on by operating the switch on the left hand side of the unit and

will automatically load the diagnostic display shown below

Touch the “SEARCH FOR HANDSETS”button to start the search.

Eickhoff Diagnostic Charging Station 9 / 30 November 2015 –Issue 1.6

5.2 A Search for Bluetooth devices begins

The Radio Handsets must be on charge for the search to be successful. Any

Machine Radio Receiver within range of the Radio Handsets to be tested MUST be

switched OFF if the handset is logged on to it (Handsets online to a Radio Receiver

will not be found).

The search will find all discoverable Bluetooth devices including mobile phones,

laptops etc. but will then discard any that are not Radio Handsets.

Eickhoff Diagnostic Charging Station 10 / 30 November 2015 –Issue 1.6

5.3 Select which Handsets are required

On this screen simply select using the touch screen the handsets you wish to

connect. Once highlighted simply click the OK button and the unit will connect to the

specified handsets.

Table des matières

Autres manuels CSL Chargeur de batteries

CSL

CSL 301050 Manuel utilisateur

CSL

CSL 304567 Manuel utilisateur

CSL

CSL 303200 Manuel utilisateur

Manuels Chargeur de batteries populaires d'autres marques

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Manuel utilisateur

Enelion

Enelion Vertica Manuel utilisateur

RCA

RCA CHU6 Manuel utilisateur

ANSMANN

ANSMANN ALCT 6/24-10 Manuel utilisateur

Hitachi

Hitachi UC 18YRSL Guide de dépannage

Olympus

Olympus B-20 LPC Manuel utilisateur

Exibel

Exibel ZH1708143 Manuel utilisateur

Lenmar

Lenmar Mach 1 Manuel utilisateur

CTEK

CTEK MXS 5.0 Manuel utilisateur

ABB

ABB HT842379 Manuel utilisateur

Nitecore

Nitecore Superb Charger SC4 Manuel utilisateur

Renogy

Renogy RBC2125DS-21W Manuel utilisateur

Braun

Braun BWC02M Manuel utilisateur

CTEK

CTEK MXS 3.6 Manuel utilisateur

Black & Decker

Black & Decker BDV090 Manuel utilisateur

Trinity

Trinity DPD Manuel utilisateur

Hulkman

Hulkman Sigma 1 Manuel utilisateur

IKEA

IKEA koppla Manuel utilisateur