Crystal Vision Introduction
1 Introduction
The FRX-VF is a two-channel optical serial digital video receiver and distribution amplifier for
3G, High Definition and Standard Definition video with two reclocked outputs per channel.
The FRX-VF is a space-saving 96mm x 325mm module which fits in the standard Vision
frames from Crystal Vision.
Optical inputs and video outputs are accessed by using the VR14 rear module.
Status monitoring of optical input presence and received power is by the Vision frame active
front panel, remote VisionPanel control panel, SNMP or VisionWeb PC software.
FRX-VF block diagram
The rear connector details may be found in the section Rear modules and signal I/O.
The main features are as follows:
Dual channel, fibre to video output operation
Two reclocked video outputs per channel
270Mb/s to 2.97Gb/s serial digital compliant to SMPTE 259M, SMPTE 292M and
SMPTE 424M
Following video standards supported: 720p 50/59.94/60Hz 1080p 50/59.94Hz, 1080i
50/59.94/60Hz, 1080p 23.98/24/25/29.97/30/50/59.94/60Hz, 1080PsF
23.98/24/25/29.97/30Hz, 2048x1080p 23.98/24/25/29.97/30Hz*, 2048x1080PsF
23.98/24/25/29.97/30Hz* (*= YUV 4:2:2 10 bit)
FRX-VF User Manual R1.0 325 November 2016
