CrustBuster Seed Box Tote Manuel utilisateur

P.O. Box 526 - Spearville, Kansas 67876 - (620) 227-7106
crustbuster.com
Seed Box Tote
Back Load Unit
OWNER'S MANUAL
#04175600 UPDATED 04/2021 (2013)


Table of Contents
Warranty Information . . . . . . . . . . . . . . . . . 1
Operator Qualifications. . . . . . . . . . . . . . . . 2
Safety and Warnings . . . . . . . . . . . . . . . . 3-6
FuelValve ......................... 7
Loading Seed in Tote Boxes . . . . . . . . . . 8-9
Wiring Diagram . . . . . . . . . . . . . . . . . . 10-11
Belt Assembly . . . . . . . . . . . . . . . . . . . . . 12
Operation, Maintenance, Belt Training . 13-14
Dimensions . . . . . . . . . . . . . . . . . . . . . . . 15
Repair Parts:
Stand - Gas with Telescoping Tube and
Remote (Prior 2021) . . . 16-17
Stand - Gas with Standard Tube and
Remote (Prior 2021) . . . 18-19
Stand - Electric with Standard Tube
(Prior 2021) . . . . . . . . . . . . . . . . . . . 20-21
Stand - Gas with Telescoping Tube and
Remote . . . . . . . . . . . . . 22-23
Stand - Gas Hardwire w/ Actuator . . 24-25
Stand - Gas Remote w/ Actuator . . . 26-27
Stand - Electric w/ Actuator . . . . . . . 28-29
Standard Tube -Gas . . . . . . . . . . . . . 30-31
Standard Tube -Electric . . . . . . . . . . 32-33
Standard Tube -Gas w/ Actuator . . . 34-35
Standard Tube -Electric w/ Actuator . 36-37
Telescoping Tube Assembly
Gas w/ Actuator . . . . . . . 38-39
Gas................ 40-41
Support Frame. . . . . . . . . . . 41
Top and LowerTubes . . . . . . 42
Wind Guard . . . . . . . . . . . . 43
Upper Roller Bracket . . . . . . 43
S-wrap Roller . . . . . . . . . . . . 43
Electric Winch . . . . . . . . . . . 44
Shaft & Sprocket Assy . . . . . 44
Handle Assy. . . . . . . . . . . . . 44
SeedSpouts...................... 45
Flexible Tube Spouts . . . . . . . . . . . . . . . 46
Engine Assemblies . . . . . . . . . . . . . . . . . 47
DryTalc ...................... 48
Trailer ................... 54-56
Options:
Remote Enclosure Assy . . . . . . . . . . 48-51
Remote Control . . . . . . . . . . . . . . . . . . . 52
Identification
Your Seed Tender is identified by a Serial Number and Model Number. Record these numbers in the
spaces provided in this manual and refer to them when ordering parts or requesting service.
Serial Number Model Number
Warranty
CrustBuster/Speed King, Inc. of Spearville, Kansas, warrants consumer products, so far as
the same is of our own manufacture, against defects in material and workmanship under
normal and reasonable use for a period of one (1) year after date of delivery to the original
purchaser. Our obligation under this warranty is limited, however, to furnishing a replacement
part for a defective part, or at our option to repair the defective parts without charge, either
method F.O.B. our works, provided the consumer gives CrustBuster/Speed King,Inc. written
notice within ten (10) days after said part appears to be defective and affords
CrustBuster/Speed King,Inc. an opportunity to inspect. Unless otherwise expressly agreed
to by CrustBuster/Speed King,Inc., the consumer shall bear the expense of installation.
CrustBuster/Speed King, Inc. will not be liable for consequential damages where the loss is
commercial, including but not limited to loss of profit, delays or expenses.
This warranty sets forth the extent of our liability. The foregoing is in lieu of all other
warranties, expressed or implied, including any warranties that extend beyond the description
of the product.
1

Operator Qualifications
Operation of this Seed Tote shall be limited to competent and experienced persons. In addition,
anyone who will operate or work around this equipment must use good common sense. In order to
be qualified, he or she must also know and meet all other requirements, such as:
1. Some regulations specify that no one under the age of 16 may operate power
machinery. It is your responsibility to know what these regulations are in your
area or situation.
2. Current OSHA regulations state in part: "At the time of initial assignment and at
least annually thereafter the employer shall instruct EVERY employee in the
safe operation of servicing of all equipment with which the employer is, or will
be involved."
3. Unqualified persons are to STAY OUT of the work area.
4. A person who has not read and understood all operating and safety instructions
is not qualified to operate the machinery.
FAILURE TO READ THIS SEED TENDER MANUAL AND ITS
SAFETY INSTRUCTIONS IS A MISUSE OF THE EQUIPMENT.
Sign Off Sheet
As a requirement of OSHA, it is necessary for the employer to train the employee in the safe operation
and safety procedures with this Seed Tender. We include this sign off sheet for your convenience and
personal record keeping.
DATE EMPLOYER EMPLOYER'S SIGNATURE
2

BE ALERT!
Your Safety is involved.
General Safety Statement
WATCH FOR THIS SYMBOL. IT POINTS OUT IMPORTANT
SAFETY PRECAUTIONS. IT MEANS "ATTENTION ))) BECOME
ALERT!"
YOUR SAFETY IS INVOLVED.
It is your responsibility as an owner, operator, or supervisor to know and instruct everyone
using this Seed Tender at the time of initial assignment and at least annually thereafter, of the
proper operation, precautions, and work hazards which exist in the operation of this Seed
Tender in accordance with OSHA Regulations.
Safety Is No Accident
The following safety instructions, combined with common sense, will save your equipment
from needless damage and the operator from unnecessary exposure to personal hazard. Pay
special attention to the caution notes in the text. Review this manual at least once each year
with new and/or experienced operators.
1. Read and understand the operator's manual before operating this Seed
Tender. Failure to do so is considered a misuse of the equipment.
2. Make sure Seed Tender is secure before operating.
3. Always keep children away from Seed Tender when operating.
4. Make sure everyone that is not directly involved with the operation is out of
the work area before beginning the operation.
5. Make sure all safety devices, shields, and guards are in place and are
functional before beginning the operation.
6. Shut off power to adjust, service, or clean.
7. Keep hands, feet, and clothing away from moving parts. It is a good idea to
remove all jewelry before starting the operation.
8. Visually inspect the Seed Tender periodically during operation for signs of
excessive vibration, loose fasteners, and unusual noises.
9. Before transportation unit, make sure tube assembly is locked into place and
safety strap is on and secure.
10. Keep box tote on level surface.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING: Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
NOTICE: Used to address practices not related to physical injury.
3

Safety Decals
REMEMBER: If Safety signs have been damaged, removed, become illegible or parts replaced without
decals, new decals must be applied. New decals are available from your authorized
distributor or factory. Individual decals shown below.
#05326400 #05303300
#05312400
#05328000
#05316500
#05310800
4

Danger
BE ALERT! YOUR PERSONAL SAFETY IS INVOLVED.
ALWAYS PARK TENDER ON LEVEL SURFACE TO UNLOAD.
Before releasing safety strap that secures tube assembly, make
sure tender is sitting on a level surface.
If parked on an unlevel surface, and the tube assembly is not
restrained, it could swing rapidly and out of control to one side or
the other.
The rope attached to the tube is to assist in guiding the tube. If
tube is swinging out of control, the rope may not control the tube.
If parked on an unlevel surface with the spout side down, (See
illustration A)the tube could rapidly swing out.
5

If parked on an unlevel surface with the spout
side up, (See illustration B)the tube will rapidly
swing to one end or the other depending on
which side the gravity pulls it. This could be
very hazardous for anyone standing in its path.
Be very cautious of situation.
If parked on an unlevel surface with the spout
side up, (See illustration C)the tube could
rapidly swing from one end to the other.
This could be very hazardous for anyone
standing in its path. Be very cautious of this
situation. This could also cause damage to the
tube assembly.
Danger
6

FUEL VALVE
When engine is not in use, leave the fuel
valve lever in the OFF position to prevent
- carburetor flooding
- fuel in the oil crank case because of
transporting vibrations
- the possibility of fuel leakage.
See engine owner’s manual to help you avoid
other damage to your engine.
CAUTION
NOTE: CrustBuster recommends fuel
valve be shut off and the motor
run completely out of fuel before
transporting.
7

NOTE:
For proper seal to hopper,
container should be lowered
straight down as shown. Make
sure there is no debris on hopper
top. Make sure rubber skirtboard
deflector is not bent under and
preventing a good seal.
CAUTION
FAILURE TO EXTEND FORKS UNDER
OAK INSERTS WILL CAUSE DAMAGE
TO SLIDE DOOR ON THE UNDER
SIDE OF CONTAINER. THIS IS A
DANGEROUS SITUATION ALSO.
Assembly
CAUTION
ALWAYS LIFT THE CONTAINER FROM THE BOTTOM. NEVER USE STRAPS OR
LIFT BY TYING ANYTHING TO THE SIDES OF THE CONTAINER. REQUIRES
MINIMUM 3000 LB. FORKLIFT TO PICK UP FULL CONTAINER. OAK INSERTS,
LOCATED IN THE BASE OF THE CONTAINER, REDUCE LIPPAGE ON FORKLIFT
FORKS AND PROVIDE STRUCTURAL SUPPORT.
8
Table des matières
Autres manuels CrustBuster Chariot d'extérieur


















