3
CoolPower 35
Disclaimer
Read all instructions carefully regarding using this product. If you do not
follow the safety instructions and information regarding proper handling
in this user manual, we accept no liability for any related personal injury
or damage to property. This user manual is intended to assist you in using
the product. Software and hardware specications in this user manual
are for reference purpose only. All pictures shown in this manual are for
the illustration purpose only. Actual product may vary. CROSSIO reserves
the right of nal interpretation for the content in this user manual and all
documents associated with this product. CROSSIO also reserves the right
to update, change or terminate this user manual without a prior notice.
Safety Instructions
– Do not operate the device if it is visibly damaged.
– Do not block the gaps of the fridge with things like a pin, wire etc.
– Do not expose the device to the rain and do not soak in water. There is a
risk of leakage or electric shock!
– Do not place the device near open ames or other heat sources
(heaters, direct sunlight…).
– Do not store any explosive substances like spray cans with
a ammable content.
– Ensure the supply cord is dry and not trapped or damaged.
– The device should be used only with the power supply unit
provided by CROSSIO.
– Once you unpack the unit it must be placed on a level surface for at least
6 hours to settle down the coolant.
– Make sure that the device stays horizontally while running. The tilt
angle should be less than 5° for long time running and less then 45° for
short time running.
– Do not drain the device upside down.
– Use the wet cloth to clean the device before use.
– Keep the product out of the reach of children. Close supervision is
necessary when the product is used near children.
– Do not use sharp tools to defrost!
! CAUTION !! CAUTION !
– The device can be repaired only by the qualied person. Incorrect repair
may cause danger.
