CROSSIO LifePower 600 Manuel utilisateur
LifePower 600
MANUAL
1
ENGLISH
Contents
Disclaimer .....................................................................................2
Safety Instructions ......................................................................2
Package Content.........................................................................3
Product Description ....................................................................3
LCD Display ..................................................................................4
Technical Specications.............................................................5
Operation......................................................................................7
Inputs .................................................................................... 7
AC Input................................................................................ 7
Solar Input............................................................................ 8
Car Charger Input............................................................... 9
USB-C PD Input .................................................................10
Outputs........................................................................................11
AC Output ..........................................................................11
UPS Function .....................................................................12
BoostUp Mode................................................................... 12
USB-A and USB-C Outputs .............................................. 13
DC Output ..........................................................................14
LED Light.....................................................................................15
Reset Button...............................................................................15
Battery Instructions ..................................................................15
Error Code Table .......................................................................16
Warranty Service.......................................................................19
LifePower 600
2
Disclaimer
Read all instructions carefully regarding using this product. If you do not
follow the safety instructions and information regarding proper handling
in this user manual, we accept no liability for any related personal injury
or damage to property. This user manual is intended to assist you in using
the product. Software and hardware specications in this user manual
are for reference purpose only. All pictures shown in this manual are for
the illustration purpose only. Actual product may vary. CROSSIO reserves
the right of nal interpretation for the content in this user manual and all
documents associated with this product. CROSSIO also reserves the right
to update, change or terminate this user manual without a prior notice.
Safety Instructions
»Producing a pure sine wave output, this product is compatible with sine
wave AC electric appliances with a power of ≤600W.
»Keep the product out of the reach of children. Close supervision is
necessary when the product is used near children.
»Use accessories recommended or sold by CROSSIO. Otherwise, it may
cause electric shock.
»Disconnect the product from the power supply when the product is
not in use.
»Never disassemble the product. Disassembling the product may cause
hazards such as re or electric shock!
»Do not cover the ventilation slots on the product in any way
to prevent overheating.
»Put the product in a ventilated and dry place.
»Follow local rules to dispose of the old product. Never dispose of the
built-in battery with normal household waste to avoid pollution.
»Do not put your nger, palm or any part of your body into the product.
»Do not throw the product into a re, water or other liquids. Protect the
product from extreme temperatures.
»Do not place the product under heavy objects. Do not subject the
product to strong impacts, such as letting it fall.
»Do not cover the product with towels and clothes when it is in use.
»Disconnect the product from the power outlet promptly after it
is fully charged.
»Never insert metal objects into the connectors or other openings on the
product otherwise there is a risk of electric shock and personal injury!
LifePower 600
MANUAL
3
»Make sure the screen is “On” before you use any button to operate the
product. If the screen is “O”, wake it up by pressing any button, then
you can perform other operations.
Package Content
• CROSSIO LifePower 600
• AC charging cable
• MC4 to DC5525 cable
• Car charger to DC5525 cable
• CROSSIO accessory bag
Product Description
Front side
Back side
Left and right side
LifePower 600
4
LCD Display
A. Input power: Current input power (Watts).
B. Output power: Current output power (Watts).
C. Remaining time or the error code signalization: A dual-purpose icon
used for time remaining to fully charge / discharge the battery or the
error code. When a fault occurs, the icon is shown as an error code. See
the Error Code Table for details.
D. Fan: Fan ON/OFF status.
E. DC: DC ON/OFF status.
F. USB: USB-A ON/OFF status.
G. Over-temperature: Indicates whether the battery / inverter temperature
exceeds a safe value.
H. Fault warning: Indicates whether a fault occurs.
I. USB-C: USB-C ON/OFF status.
J. AC: AC ON/OFF status.
K. AC frequency: Current operating frequency of the AC output ports (50
or 60 Hz).
L. Overload: Indicates the AC output overload.
– The current battery percentage and remaining battery in hours
displayed are for reference only. Actual data may vary.
– This product has a built-in intelligent cooling system. The intelligent
cooling fan is automatically turned on to cool the product down
when the product temperature exceeds the limit. The cooling fan
may produce noise, which is normal.
– If an over-temperature protection is triggered during the use of
this product, the over-temperature icon on the screen blinks and all
input/output ports stop working. Wait until the battery temperature
returns to the normal range and restart the product. Note: The
LifePower 600
MANUAL
5
product will enter the over-temperature protection mode and stop
working when its temperature becomes too low or too high.
M. Battery percentage: Current remaining battery. When the
remaining battery is 0 %, the icon starts blinking. Recharge
the product immediately.
N. Charge/discharge status ring: Indicates whether the battery is charging
or discharging. When charging - the ring keeps spinning, when showing
remaining time - the ring will be static and each part of the ring will
gradually disappear according to the remaining battery capacity.
Technical Specications
Battery
Capacity
537.6Wh (24Ah/22.4V)
Battery Type LiFePO4 battery (electric vehicle grade)
Inputs AC: 220V-240V~1.36A 300W
Car Charger: 12V-24V⎓5A
Solar Charging: 12V-30V⎓5A 120W (Max)
1xUSB-C(PD): 5V,9V,12V,15V⎓3A;20V⎓3A 60W (Max)
1xUSB-C(PD): 5V,9V,12V,15V⎓3A;20V⎓5A 100W (Max)
(2xUSB-C: Total 160W Max)
Outputs 1xAC: 220V-240V~2.6A;Continuous 600W (peak
1200W); frequency 50Hz
2xUSB-A(Fast Charge):
5V⎓3A;9V⎓2A;12V⎓1.5A 18W (Max)
(2xUSB-A: Total 36W Max)
1xUSB-C(PD): 5V,9V,12V,15V⎓3A;20V⎓3A 60W (Max)
1xUSB-C(PD): 5V,9V,12V,15V⎓3A;20V⎓5A 100W (Max)
(2xUSB-C: Total 160W Max)
2xDC 5.5mm: 12V⎓5A 60W
(Max)(2xDC:Total 120W Max)
1xCar Charger: 12V⎓10A 120W
(2xDC+1xCar Charger: Total 120W Max)
Life Cycles ≥3500 times
Weight 7.8kg
LifePower 600
6
Size 291*216*203mm
Operating
Temperature
-15°C~45°C
Charging
Temperature
0°C-45°C
LED Light 10W, 3 working modes (High-Low-SOS)
AC Charging charged to 80% in 1.6 hour
Car Charger
Charging
charged to 80% in 8-9 hours (12V), 4-5 hours (24V)
Solar Panel
Charging
charged to 80% in 6-8 hours with 100W solar panel at
standard irradiance of 1000W/m2
USB-C (PD)
Charging
charged to 80% in 3-4 hours via 100W and
60W PD chargers
To manually switch from 50Hz to 60Hz, turn the AC power button O and
then press AC and DC power buttons at the same time for 3s.
LifePower 600
MANUAL
7
Operation
Inputs
1. When the power station is connected to an AC power source, a solar
panel, a car charger and a USB-C port at the same time, the PV input
(solar panel) is prioritized to charge the power station.
2. LifePower 600 supports a maximum total input of 420W (300W AC
and solar 120W).
3. The screen will automatically dim if no operation is conducted within
5 minutes after the product is turned on. Press any button to light up
the screen again.
AC Input
1. To recharge the power station, connect it to a wall socket with the AC
charging cable.When the power station is connected to an AC power
source, the screen automatically lights up. Pressing the Power button
cannot turn O the product and screen while charging.
2. When the product is charging, the charge/discharge status ring on
the screen keeps spinning. Meanwhile, the current battery percentage,
current charging power and time to recharge will be changing
on the screen.
3. The product is fully charged when the charge/discharge status ring
stops spinning, the battery percentage displayed turns to 100% and time
remaining to fully charge turns to 0. Disconnect the AC charging cable
from the wall socket.
LifePower 600
8
Solar Input
1. To recharge the power station with the solar panel, you can use the
provided MC4 to DC5.5mm cable to connect the DC5.5x2.5mm input
port of the power station to the solar panel.
2. When the product is charging, the charge/discharge status ring on
the screen keeps spinning. Meanwhile, the current battery percentage,
current charging power and time to recharge will be changing
on the screen.
3. The product is fully charged when the charge/discharge status ring
stops spinning, the battery percentage displayed turns to 100% and time
remaining to fully charge turns to 0. Disconnect the charging cable from
the power station.
With a built-in MPPT controller, the DC5.5x2.5 solar input port supports
12-30V solar input. Do not charge the product via solar panels with
an operating voltage outside this range. There is a risk of damage
to the product!
Autres manuels pour LifePower 600
1
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
