Crosley CR3501A Manuel utilisateur

CR3501A

Fleetwood

Instruction Manual

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. –6 p.m., EST, Monday –Friday

1-888-CROSLEY

www.crosleyradio.com

English

Safety Instructions

Read and understand this entire manual before using this product. Keep these

instructions for future reference.

1. Do not use this product near water.

2. This product should be operated only by the type of power source indicated

on the marking label or in this instruction manual.

3. Do not defeat the safety purpose of the polarized plug. A polarized plug has

two blades with one blade wider than the other. This plug will fit into the

power outlet only one way. If you are unable to insert the plug fully into the

outlet try reversing the plug. If the plug should still fail to fit, contact your

electrician.

4. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the product.

5. Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

6. Never push objects of any kind into this product through openings as they

may touch dangerous voltage points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the product.

7. Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

8. Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

9. Do not use attachments not recommended by the product manufacturer as

they may cause hazards.

10. A product and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the product and cart

combination to overturn.

11. Slots and openings in the cabinet are provided for ventilation and to ensure

reliable operation of the product and to protect it from overheating. Do not

block or cover these openings.

12. Unplug the product during lightning storm or when unused for long periods of

time.

English

Items in this package

Before throwing away any packaging materials, please check thoroughly and

make sure you find the following items that come along with this package:

Radio

Remote Control

Power cord

3.5mm aux in cable

FM Wire Antenna

Please contact Crosley customer service if there is any accessory missing from

the package. Retain the original packaging materials for exchange or return

purposes.

Specifications

Power Source AC120V ~ 60 Hz

Power consumption 30W

Output Power 15W x 2

Frequency Range FM 87.5 –108.0 MHz

Frequency Response 45Hz –20KHz

Audio Input Sensitivity 500mV

Dimension 366 x 115 x 232 mm

Note:

Design and specifications are subject to change without notice.

To help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers will

automatically cut-off. To turn power back on and resume playing, you will need to

turn off the power and turn it on again.

English

Product Description

1. CD Tray

2. Remote Control Sensor

3. Power Button

4. Open/Close Button

5. Function Button

6. Dimmer Button

7. Mode Button

8. Program Button

9. Volume Knob

10.Backward Skip Button

11.Preset Down Button

12.Play/Pause Button

13.EQ Button

14.Forward Skip Button

15.Preset Up Button

16.RCA Jacks

17.Antenna

18.USB Jack (for SERVICE ONLY)

19.Power Jack

English

1. Power Button

2. Function Button

3. Info Button

4. Intro Button

5. Stop Button

6. Preset Buttons

7. Numeric Pad

8. Dimmer Button

9. Open/Close Button

10.Shuffle Button

11.Repeat Button

12.Mute Button

13.Play/Pause/Pair Button

14.Skip Button

15.Volume Button

16.EQ Button

17.Bass Button

18.Sleep Button

19.Clock Button

20.Program Button

English

Initial Setup

Essential Setup

1. Place the unit on a flat and level surface. The selected location should be

stable and free from vibration.

2. Connect AC adaptor to the Power Jack of the unit.

3. Connect the supplied FM wire antenna to the ANT. socket on the unit.

4. Untie the FM Antenna and allow it to hang in a straight line.

Remote Control

Prepare the Remote Control

First-time use:

The unit has a pre-installed lithium CR2025 battery. Remove the protective tab to

activate the remote control battery.

Replace the Remote Control Battery

1. Pull out the battery tray and remove the old battery.

2. Place a new CR2025 battery into the battery tray with correct polarity (+/-) as

indicated.

3. Insert the battery tray back into the slot.

Note:

-If the Remote Control is operated near other products which generate infrared rays,

or if other remote control devices using infra-red rays are used near the unit, it may

operate incorrectly. Conversely, the other products may operate incorrectly.

Clock Setup

Set the Clock

Manually setting the clock can only be done in STANDBY mode.

1. In STANDBY mode, press and hold the CLOCK button on the remote control

until the hour digits are flashing.

-Press the button on the unit or the button on the remote control

to select 12/24 hour format.

2. Press the buttons on the remote control or on the unit to adjust the

hour digits while flashing. Press CLOCK button on the remote control to

confirm, and then the minute digits will flash.

3. Press the buttons on the remote control or on the unit to adjust the

minute digits while flashing. Press the CLOCK button on the remote control to

confirm.

English

Setting the Alarm

1. In Standby mode, press and hold the Timer/Sleep button on the remote

control until the hour digits flash on the display.

2. Press the buttons on the remote control or on the unit to adjust the

hour digits, and then press the Timer/Sleep button on the remote control to

confirm, the minute digits will flash on the display.

3. Press the buttons on the remote control or on the unit to adjust the

minute digits, and then press the Timer/Sleep button on the remote control to

confirm, the mode will flash on the display.

4. Press the buttons on the remote control or on the unit to select:

-FM (to wake to your selected FM Radio Station)

-BUZZER (to wake to a buzzer sound)

-DISC (to wake to your disc music)

5. Press the Timer/Sleep button on the remote control to confirm, the display will

show the volume level.

6. Press the buttons on the remote control or on the unit to adjust the

volume, and press the Timer/Sleep button on the remote control to confirm.

The display will show the current time and will appear from the display.

Activate and Deactivate the Alarm

-Press the Timer/Sleep button on the remote control to view the alarm settings

or activate the alarm.

-To deactivate the alarm, press the Timer/Sleep two times. The will

disappear from the display on the front of the unit.

-To activate the alarm, press the Timer/Sleep two times. The will show from

the display on the front of the unit.

Stop Alarm Ring

-When the alarm rings, press the button on the remote control or on the unit.

The alarm stops but the alarm settings remain.

English

Radio Operation

Tuning in a Station

Tune in radio stations automatically

-Press and hold the buttons, the frequency changes down or up

automatically until a station is found.

Tune in radio stations manually

-Press the buttons repeatedly until you find the station you want.

Note:

-The unit is equipped with a FM wire antenna. To FM improve reception, move the

wire around until the reception is clear without interferences. Do not connect the wire

to any additional antenna.

Auto Scan and Save Preset Station

1. Press the button on the main unit or press the FM button on the remote

control to select FM mode.

2. Press and hold the PROG button on the remote control to activate automatic

programming. All available stations are programmed in the order of waveband

reception strength.

Tune to a Preset Radio Station

-Press the PRESET buttons to select a preset that you want.

Presetting Stations Manually

You can preset up to 30 FM stations.

1. Tune in the desired station, then press the PROG button.

2. Press the or number (0-9) buttons to select the preset number.

3. Press the PROG button to store the station.

4. Repeat above steps 1 to 3 for each station you want to store in memory with

a preset number.

Set the Sleep Timer

1. Press the TIMER/SLEEP button on the remote control repeatedly to select

your desired number of minutes. The number of minutes shown will display in

this sequence:

SLEEP 90 SLEEP 60 SLEEP 30 SLEEP 15 SLEEP 00

2. Stop pressing the SLEEP button when your desired number of minutes is

displayed. The sleep timer is now set.

-Press the SLEEP button to view the remaining time before switch off.

-To cancel the sleep timer, press the SLEEP button repeatedly until

“SLEEP 00” shows on the display.

English

CD Playback Operation

1. Press the button on the main unit or press the CD button on the remote

control to select CD mode.

2. Press the button on the unit or remote to open the CD tray and put the CD

in the tray with the labeled side facing up.

3. Press the button again to close the tray. If it is a blank CD or an

unrecognizable CD, it will show “NO DISC”. Playback will start automatically.

4. During the playback, press the button on the unit or the button on

the remote control to pause or resume play.

5. To skip to the next or previous track, press the buttons on the remote

control or on the unit.

6. To search fast forward or backward a track, press and hold the buttons

on the remote control or on the unit correspondingly until you reach the

desired time. Release the button and the playback will resume.

7. Press the button if you want to completely stop playback.

Intro Playback

1. Press the Intro button on the remote control.

2. The unit will play the first 10 seconds of each track.

3. Press the Intro button on the remote control again to resume normal

playback.

Random Playback

Press the Shuffle button on the remote control or the Mode button on the unit to

switch Shuffle Mode. The selected mode will show on the display.

-SHUFFLE: Randomly play the song. lights up.

-SHUF OFF: Shuffle turned off.

Repeat Playback

Press the Repeat button repeatedly on the remote control or the Mode button on

the unit to select Repeat play modes. The selected mode will show on the

display.

-RPT ONE: Repeat current track. blinks.

-RPT ALL: Repeat all tracks. lights up.

-RPT OFF: Repeat turned off.

English

Programmed Playback

1. Press the button on the remote control.

2. Press the PROG button on the remote control or on the unit to enter Memory

mode.

3. Press the number (0-9) buttons or buttons on the remote control or on

the unit to select the track that you want to preset, then press PROG button to

confirm.

4. Repeat step 3 to program more tracks.

5. Press the button to playback program tracks.

Note:

-If you want to change the programed files, press the button two times to clear the

current program files, display shows "PRG CLR"

Bluetooth Operation

1. Press the button on the main unit or press the BT button on the remote

control. “NO BT” will show on the display if the unit is not paired to any

Bluetooth device.

2. Select “CR3501A-WA” in the pairing list. On successful pairing, you will hear

"Paired" from the unit, and the display panel shows “BT”.

3. If you cannot find the unit, press and hold the button on the remote

control or the button on the unit to be searchable. The display will show

“PAIRING” and you will hear "Pairing" from the unit.

Note:

Enter “0000” for the password if necessary

Version 3.0

Other Operation

Select the Equalizer

Press the EQ button on the remote control or on the unit repeatedly to select:

[Pop] - [Classic] - [Jazz] - [Rock] - [Flat]

Adjust the Brightness

Press the Dimmer button on the remote control or the button on the unit to

select brightness level.

Adjust the Bass

Press the Bass button on the remote control enable and disable the bass.

Table des matières

Autres manuels Crosley Système stéréo

Crosley

Crosley CR3012A Manuel utilisateur

Crosley

Crosley Lancaster CR42 Manuel utilisateur

Crosley

Crosley CR703 Manuel utilisateur

Crosley

Crosley Memory Master CR2401A Manuel utilisateur

Crosley

Crosley Crosley Coloradio CR52 Manuel utilisateur

Crosley

Crosley Traveler CR21 Manuel utilisateur

Crosley

Crosley CR7020A Manuel utilisateur

Crosley

Crosley Crosley Traveler Stack-O-Matic CR89-BT Manuel utilisateur

Crosley

Crosley Performer CR2402A Manuel utilisateur

Crosley

Crosley Rochester CR7021A Manuel utilisateur

Crosley

Crosley CR44-CD Manuel utilisateur

Crosley

Crosley CR7002A Manuel utilisateur

Crosley

Crosley Tablet Jukebox CR1205A Manuel utilisateur

Crosley

Crosley DF-4100 Manuel utilisateur

Crosley

Crosley Rochester CR66 Manuel utilisateur

Crosley

Crosley Music Writer CR24-003A Manuel utilisateur

Crosley

Crosley CR19CD Radio Manuel utilisateur

Crosley

Crosley Rochester CR66 Manuel utilisateur

Crosley

Crosley Band Master 3-in-1 Entertainer CR86 Manuel utilisateur

Manuels Système stéréo populaires d'autres marques

LG CM3330B Manuel utilisateur

Sony

Sony SS-CEP50 Manuel utilisateur

Cetacea Sound

Cetacea Sound CVS-II Manuel utilisateur

Aiwa

Aiwa XR-H66MD Manuel utilisateur

Denon

Denon UCD-250 Manuel utilisateur

Sanyo

Sanyo DC-MX41i Manuel utilisateur

Sharp

Sharp CD-ES600V Manuel utilisateur

Exibel

Exibel BDX600-UK Manuel utilisateur

Sanyo

Sanyo DC-F320 Manuel utilisateur

Philips

Philips FWM583X Manuel utilisateur

Sharp

Sharp CD-C462 Manuel utilisateur

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuel utilisateur

Aiwa

Aiwa XR-EM70 Manuel utilisateur

Cyrus

Cyrus Lyric Manuel utilisateur

Philips

Philips MCM159/98 Manuel utilisateur

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuel utilisateur

RCA

RCA RS3965SB Manuel utilisateur

Sharp

Sharp XL-UH240 Manuel utilisateur