Croise PBH-300 Manuel utilisateur
* Please refer to the manual at www.croise.co.kr for more information
PBH-300 User Manual
CE Compliance Information
Croise.R, hereby declares that this PBH-300 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
FCC Compliance Information
FCC ID : 2AD5K-PBH300
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions :
This device may not cause harmful interference, and this device must accept any interference received,
including interference that may cause undesired operation.
Information to the user :
NOTE : This equipment has been tested and found to comply with limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to pro¬vide reasonable protection against harmful
interference in a residential installation. This equipment generates, use and can radiate radio frequency energy and,
if not in¬stalled and used in accordance with the instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular installation,
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on.
the user is encouraged to try the correct interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION TO USER : Changes or modifications not expressly approved by the party reasonable for compliance could void
the user’s authority to operate the equipment.
Package Contents Package Contents
Description of Parts
Installation of Cable Clip
Product Specifications and Features
How to use
Power on/off
Charging
Pairing
Calling
Transferring a Call
Volume Control
Music Play
Multi-Connection
Using Croise.R Reader Application
Button Functions and Status Information
14
15
16
17
Precautions
Product Warranty and Service
Limited Warranty
Product Warranty Certificate
PSB-300 User Manual
/ Package Contents /
Cable Clip
Earbud Covers
(Large / Small)
User Manual
※ The components of above package are subject to
change without notice to improve the product
performance or quality.
PBH-300
/ Description of Parts /
Mic 1
Micro USB
Mic 2
Volume Up
Volume Down
LED
Play / Pause
Call
Please hang the clip on the
headset band by stretching
it little bit.
Place it at the suit position and
fix the earphone cable properly.
※ The length of cable from the headset body to a user's ear can be easily adjusted through
using the clip.
/ Installation of Cable Clip /
/ Product Specifications and features /
Standby Time
Operating Time (Music)
Operating Time(Talk)
Charging Time
Battery
Working Distance
Supported profiles
Decoder
Bluetooth Version
Power Consumption
※ Above operating time subject to change based upon connected devices or
the surrounding environment.
600 hours
15 hours
15 hours
2 hours
Lithium Polymer Battery 3.7V (210mAh)
10m
HFP / HSP / A2DP / AVRCP
SBC, APT-X
Version 4.1
0.5W
1. Power On / Off
Power On
- Press the button for 1 second
- The red + blue LED light flashes for 0.5 second and Power is turned on with voice guide.
Power Off
- Press the button for 3 seconds
- The red + blue LED light flashes for 0.5 second and Power is turned off with voice guide.
2. Battery Charging
LED indicator
- When the charger is connected, the Red LED is on.
- When charging is completed, the Blue LED is on.
※ When the charger is connected, the headset will be disconnected from the device.
※ The power turns off when USB charger is disconnected.
/ How to use /
Recommendations
- Using USB Hub may take extra charging time due to the low current.
For Fast charging, please use the 5V 500mA ~ 5V 1A rated charger.
※ It takes approximately 2 hours to have it fully charged when battery exhausted
3. Battery Status Alarm & Alert
- Press Call and Volume + button at the same time for a second for audio
guidance for the current battery level.
“Battery Full” / “Battery Half” / “Battery not enough”
4. Low Battery Alarm & Alert
- The red LED light flashes 3 times with voice guidance “Battery not enough” if the battery
is less than 1 hour use.
5. Critical Battery
- The notice continues every 2 minutes if the battery is less than 10 minutes use and
power is turned off with voice guidance “Battery Empty” at the critical battery.
6. Pairing
Before using the headset for the first time, you must pair it with a Bluetooth-enabled Device.
* Pairing : Connect between Bluetooth-enabled Device and Headset.
- Press the call button for 1 second to turn on the device
- After power on, the headset will automatically enter to pairing mode.
(The red/blue LED light flashes)
- The headset will automatically enter to waiting mode if it is not connected for 3 minutes.
(The power is automatically after 50 minutes with waiting mode)
- On the device you want to have paired, find the Bluetooth menu and search & select
“PBH-300” from the list of devices.
- If connected without any problem, the headset will be paired with audio guide “Connected”
- Once pairing is complete, it will be paired automatically afterwards.
※ Manual Pairing
- Hold Call button for 2 second while placing power slide switch to ON then it will enter to
Pairing mode with voice guide “Start pairing”. And Register the PBH-300 in above same way.
- If PIN code is required, please input “0000”.
Table des matières
