DO GUIDE DOC. 7697B (2041854) 09.14
Specications subject to change without notice.
DO Make Connections
Connect the PYNG-CONNECT-COM to the network via the included Ethernet cable. The
PYNG-CONNECT-COM is powered via Power over Ethernet (PoE). Connection ports are
depicted in illustration .
DO Find Detailed Setup Information
Setup of the PYNG-CONNECT-COM is performed using the Crestron Pyng app™. The Crestron
Pyng app communicates with the PYNG-CONNECT-COM through its connection to the
PYNG-HUB (sold separately). If help is required during setup of the system, refer to the Crestron
Pyng app help screens. For information specic to the current screen, tap in the Crestron
Pyng app to display the available help topics.
NOTE: The hostname is PYNG-C- and the last eight digits of the MAC address. The hostname
is PYNG-C-7F2ED7CB for a PYNG-CONNECT-COM with the MAC address label shown in
illustration . The MAC address label is located on the bottom of the PYNG-CONNECT-COM.
DO Learn More
Check the website for the latest rmware updates.
Crestron Electronics 15 Volvo Drive, Rockleigh, NJ 07647
888.CRESTRON | www.crestron.com
This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.
As of the date of manufacture, the PYNG-CONNECT-COM has been tested and found to comply with specications for CE marking.
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Changes or modications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Industry Canada (IC) Compliance Statement
CAN ICES-3(B)/NMB-3(B)
The Crestron Pyng application and its use by end-users are governed by both the Terms of Use for Crestron Mobile Cloud Computing Applications as well as the Privacy Statement for Crestron
Mobile Cloud Computing Applications which can be found on the Crestron website at www.crestron.com/legal/mobile_cloud_apps_tos_privacy. Crestron product operating system software,
including Crestron Pyng, is licensed to Crestron dealers, CSPs, and end-users under an End-User License Agreement which can be found on the Crestron website at www.crestron.com/legal/
software_license_agreement.
The specic patents that cover Crestron products are listed at www.patents.crestron.com. Product warranty can be found at www.crestron.com/warranty.
Crestron, the Crestron logo, and Crestron Pyng are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. UL and the UL logo are
either trademarks or registered trademarks of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be
used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is
not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2014 Crestron Electronics, Inc.
LAN PoE
To Security
System
PYNG-CONNECT-COM Ports
Example MAC Address
