Crestron Mercury CCS-UC-1 Manuel utilisateur

CCS-UC-1

SIP Endpoint with Cisco®Unified

Communications Manager 10.5

Configuration Guide

Crestron Electronics, Inc.

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a limited non-exclusive,

non-transferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron

dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron

website at www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, AirMedia, Crestron Toolbox, and Crestron Mercury are either trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and/or other countries. Bugzilla is either a trademark or registered trademark of the Mozilla Foundation in

the United States and/or other countries. Cisco is either a trademark or registered trademark of Cisco Systems, Inc. in the United States

and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the

entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.

Crestron is not responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

Configuration Guide – DOC. 7993A Contents

•

Contents

Introduction 1

Audience................................................................................................................. 1

Topology................................................................................................................. 1

Software Requirements........................................................................................... 2

Hardware Requirements ......................................................................................... 2

Product Description ................................................................................................ 2

Summary ................................................................................................................ 2

Features Supported ................................................................................... 2

Features Not Supported............................................................................. 3

Known Issues and Limitations................................................................................. 3

Crestron Mercury Configuration 4

Setup ...................................................................................................................... 4

Configuring the device ............................................................................................ 4

Configuring the SIP Parameters .............................................................................. 7

Cisco UCM Configuration 8

Configure the End User........................................................................................... 8

Configure Region for G729 ................................................................................... 10

Configure a SIP Profile .......................................................................................... 11

Configure Phone Security Profile ........................................................................... 15

Configure the Crestron Mercury Device as a Third-party SIP Device ..................... 16

Configure Media Resource Group and Media Resource Group List ...................... 22

Configure Trunks................................................................................................... 24

Cisco UCM- PSTN Gateway Trunk Configuration .................................... 24

Cisco UCM - Unity Connection Trunk Configuration................................. 29

Configure Route Patterns...................................................................................... 33

Voice Mail Configuration........................................................................................ 40

Configure Voice Mail Pilot and Voice Mail Profile on Cisco UCM .............. 40

Configuration on Unity Connection - Add New Phone System ................. 42

Configure a Voice Mail User ..................................................................... 46

•

Contents Configuration Guide – DOC. 7993A

Configuration Guide – DOC. 7993A CCS-UC-1: SIP Endpoint with Cisco UCM 10.5

•

CCS-UC-1: SIP Endpoint with Cisco

Unified Communications Manager

10.5

Introduction

This configuration guide describes the necessary procedure to configure the Crestron

Mercury™ device to register to the Cisco®Unified Communications Manager as a basic SIP

endpoint.

Audience

This document is intended for users attempting to configure and use the Crestron Mercury

devices as SIP endpoints registering to the Cisco Unified Communications Manager (Cisco

UCM).

Topology

The network topology for the Crestron Mercury endpoint to interop with the Cisco UCM is

shown below.

SIP Endpoint Integration with Cisco UCM - Reference Network

•

CCS-UC-1: SIP Endpoint with Cisco UCM 10.5 Configuration Guide – DOC. 7993A

The lab network consists of the following components:

•Cisco UCM cluster for voice features

•Cisco SIP phones

•Crestron Mercury devices as SIP endpoints

Software Requirements

•Cisco Unified Communication Manager v 10.5.2.13900-12

•Cisco Unity Connection v 10.5.2.13900-12

•Crestron Mercury device v 1.3353.00029

Hardware Requirements

•Cisco UCS-C240-M3S VMWare Host running ESXi 5.5

•Cisco 3845 as PSTN Gateway

•Cisco phone models: 8961 (SIP), 8945 (SIP)

•Crestron Mercury devices (2)

Product Description

The Crestron Mercury device is a complete solution for conference rooms. It acts as an

all-in-one touch screen, speakerphone and AirMedia®product for conference rooms

that integrate microphones and speakers into the user interface at the table.

Crestron Toolbox™ software is used to discover and control all Crestron devices on the

network.

The Crestron Mercury web interface is used to control the Crestron Mercury devices on

the network.

Summary

The Crestron Mercury devices were configured on the Cisco UCM as basic SIP endpoints

since they support only a single line/extension. The devices successfully registered to the

Cisco UCM with digest authentication.

The sections below describe supported and unsupported features on a Crestron Mercury

device.

Features Supported

•Registration with digest authentication

•Basic Calls with G729, G722, G711u, and G711a codecs

•Caller ID (limited to only calling number)

•DTMF support

•Early media support

•Retrieval of a parked call

Configuration Guide – DOC. 7993A CCS-UC-1: SIP Endpoint with Cisco UCM 10.5

•

•Transferee in a call transfer

•Conference participant

•Member of hunt group

•Voice mail access and interaction

Features Not Supported

•Caller ID presentation with name and number display

•Call hold and resume

•Call forwarding on the device (Forwarding can be configured on the PBX for the DN

assigned to the endpoint.)

•Call waiting

•Conference

•Initiating attended call transfer

•Initiating semi-attended call transfer

•Initiating blind call transfer

•Configuration of shared line on device

•Initiating call park

•Do Not Disturb (DND)

Known Issues and Limitations

•The Crestron Mercury device does not allow calls to be placed or accepted as long

as the SIP server is unreachable and the device is un-registered. This causes an

established active call to be dropped in a scenario where there is a PBX network

outage due to the device losing its registration status. This issue is tracked via

Crestron’s Bugzilla™ software Defect: 128016.

•Caller ID is not supported on the Crestron Mercury device. Currently, only the

calling party number is displayed as the caller ID. This issue is tracked via

Crestron’s Bugzilla software Defect: 119006.

•The active call timer on the Crestron Mercury device does not reflect the correct call

duration. The active call duration includes the time for which the unit was being

alerted also. This issue is tracked via Crestron’s Bugzilla software Defect: 124001.

•The first ringback heard on Crestron Mercury device is stuttered. It resembles a mix

of local and remote ringback. This issue is tracked via Crestron’s Bugzilla software

Defect: 122421.

•On the Crestron Mercury web user interface, there is currently no notification

provided to the user when certain mandatory configurations are missing. This issue

is tracked via Crestron’s Bugzilla software Defect: 125193.

•On the Crestron Mercury web user interface, a configuration of DHCP OFF on the

Network configuration page mandates configuration of both the adapters. The user

is unable to save changes unless both the adapters are configured and is notified of

an invalid IP against the default of 0.0.0.0 for an unused adapter. This issue is

tracked via Crestron’s Bugzilla software Defect: 126236.

•

CCS-UC-1: SIP Endpoint with Cisco UCM 10.5 Configuration Guide – DOC. 7993A

•On the Crestron Mercury device, for certain called numbers that cannot be reached

or are invalid, the user only hears a reorder tone and does not have the option to

disconnect the call except by pressing the call button again. This issue is tracked

via Crestron’s Bugzilla software Defect: 122633.

Crestron Mercury Configuration

Setup

The LAN port of the Crestron Mercury device needs to be connected to one PoE+ port to

power it up and network for connectivity with the Cisco UCM. The PoE+ switch that is used

should have the LLDP functionality enabled for the device to power up and be completely

functional. By default, the “poeplus” configuration is set to Off on the device.

Configuring the device

To configure the Crestron Mercury device, follow this procedure:

1. Access the web GUI for the device by using an http session with the device’s IP

address. 10.80.10.100 was used in this example as the device IP. The initial page

that displays is shown below.

Crestron Mercury Configuration: Login to Web GUI

2. Click

and log in to the device. For information on device administration,

refer to the CCS-UC-1 Supplemental Guide (Doc. 7844) at

www.crestron.com/manuals.

The Status screen that appears displays basic information on the device.

Configuration Guide – DOC. 7993A CCS-UC-1: SIP Endpoint with Cisco UCM 10.5

•

Crestron Mercury: Status

The device can be configured from the

Network

page.

3. On the web GUI, navigate to

Network

•

CCS-UC-1: SIP Endpoint with Cisco UCM 10.5 Configuration Guide – DOC. 7993A

Crestron Mercury Configuration: Network Setting: DHCP Off: Static IP Configured

4. Enter the following parameters in the

Adapter 1

section to configure the Crestron

Mercury device.

•

DHCP

: Either of the two can be chosen:

oObtain an IP address automatically

oUse the following IP address

For the test, a static IP was configured.



IP address

: 10.80.10.100was used in this example.



Subnet Mask

: 255.255.255.0 was used in this example.



Default Gateway

: 10.80.10.1 was used in this example.



DNS Server 1

: 10.64.1.3 was used in this example.

5. Click

Save Changes

Autres manuels pour Mercury CCS-UC-1

Table des matières

Autres manuels Crestron Système de conférence

Crestron

Crestron UC-MX50-Z Manuel utilisateur

Crestron

Crestron UC-C160-Z Manuel utilisateur

Crestron

Crestron CCS-UC-200 Manuel utilisateur

Crestron

Crestron DM-NUX-L2-1G Manuel utilisateur

Crestron

Crestron UC-B140-T Manuel utilisateur

Crestron

Crestron Flex UC-B30-T-WM Manuel utilisateur

Crestron

Crestron UC-FCMX Series Manuel utilisateur

Crestron

Crestron UC-MM30-R Manuel utilisateur

Crestron

Crestron UC-BX31-Z-INDIA Manuel utilisateur

Crestron

Crestron UC-MM30-TA Manuel utilisateur

Crestron

Crestron UC-M50-Z Manuel utilisateur

Crestron

Crestron UC-M130-T Manuel utilisateur

Crestron

Crestron UC-B30-T Manuel utilisateur

Crestron

Crestron UC-BX31-Z-WM Manuel utilisateur

Crestron

Crestron Flex UC-MX70-U Manuel utilisateur

Crestron

Crestron DMPS3-4K-350-C Manuel utilisateur

Crestron

Crestron UC-C160-Z Manuel utilisateur

Crestron

Crestron CCS-UC-300 Dessin dimensionnel

Crestron

Crestron DMPS3-4K-350-C Manuel utilisateur

Crestron

Crestron UC-B160-Z Manuel utilisateur

Crestron

Crestron Mercury CCS-UC-1-T Manuel du propriétaire

Crestron

Crestron UC-MX50-Z-UPGRD Manuel utilisateur

Crestron

Crestron UC-B31-T-WM Manuel utilisateur

Crestron

Crestron UC-BX30-T Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur

AXIWI

AXIWI AT-350 Manuel utilisateur