Mouse/Keyboard Controller Crestron CNMK
2 •Mouse/Keyboard Controller: CNMK Operations Guide - DOC. 5699A
Using the CNMK, it is possible to display the equivalent of a QWERTY keyboard on
any large Crestron touchpanel to allow manual real-time text entry directly to a PC
from the touchpanel screen. Select keyboard commands can be assigned to buttons
on any Crestron handheld remote to control computer-based slide presentations.
Macros can be easily programmed to execute a string of commands.
The CNMK includes pass-through connectors to enable the simultaneous connection
of a standard or wireless PS/2 keyboard and mouse. However, since not all PS/2-type
keyboards and mice are fully plug-and-play compatible with all PCs, Crestron
recommends the use of the supplied Y-mouse Adapter. (Refer to the “Simplified
Configuration Diagram” on page 8.)
Specifications
The table below provides a summary of specifications for the CNMK.
Specifications of the CNMK
SPECIFICATION DETAILS
Cresnet Power Usage 3 Watts (0.125 Amps @ 24 VDC)
Default Net ID 28
Control System Update Files1, 2, 3
2-Series Control System
CNMSX-AV/PRO
CNRACKX/-DP
CEN/CN-TVAV
ST-CP
Version 2.004.CUZ or later
Version 5.14.02X.UPZ or later
Version 5.14.02W.UPZ or later
Version 5.12.63V.UPZ or later
Version 4.02.4S.UPZ or later
CNMK Firmware CNMKv2.0.upg or later
Environmental Temperature 32° to 113°F (0° to 45°C)
Humidity 10% to 90% RH (non-condensing)
Overall Dimensions Height: 1.70 in (4.32 cm)
Width: 7.07 in (17.95 cm)
Depth: 6.33 in (16.06 cm)
Weight 2.0 lb (0.90 kg)
1. The latest versions can be obtained from the Crestron website. Refer to NOTE after last footnote.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
3. Filenames for CNX and ST-CP update files have a UPZ extension. Files on the website may be .zip or
self-extracting .exe files containing the .cuz or .upz file. All can be obtained from the Downloads section
of the Crestron website. To avoid program problems, make sure you are using the update file with the
correct suffix letter (e.g., S, V, W, X).
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users may
be required to register to obtain access to certain areas of the site (including the FTP site).
Physical Description
The CNMK is housed in a black enclosure with labeling on the front and rear panels.
Four LEDs on the front of the unit indicate the unit’s status. All the connections are
made on the back of the unit. Refer to the following physical views shown after this
paragraph. There are four rubber feet on the base of the unit for stability and to
prevent slippage.
