Creator C50X Manuel utilisateur
Creator C50X Single vehicle & OBDII Scanner
1
INDEX
1．Safety Precautions and Warnings........................................ 2
2. Using the Scan Tool................................................................ 4
2.1 Tool Description................................................................. 4
2.2 Specifications..................................................................... 5
2.3 Accessories Include........................................................... 5
2.4 Product Troubleshooting................................................... 6
3. C50X series Model description............................................ 7
4. Software Function.................................................................... 7
4.1 System setting..................................................................... 9
A.SYSTEM INFORMATION..............................................................9
B.BEEPER.................................................................................... 10
C.LANGUAGE SETUP....................................................................10
5. Diagnostics.............................................................................. 12
5.1 Strat Daignostic............................................................... 12
5.2 Read Trouble Code............................................................. 15
5.3 Erasing Codes..................................................................... 16
5.4 Read DataStream................................................................. 17
5.5 Vehicle Information......................................................... 19
5.6 Quit Diagnostic................................................................. 19
6. Software update...................................................................... 20
Creator C50X Single vehicle & OBDII Scanner
2
1．Safety Precautions and Warnings
To prevent personal injury or damage to vehicles
and/or the scan tool. Read this instruction
manual first and observe the following safety
precautions at a minimum whenever working on a
vehicle.
·Always perform automotive testing in a safe
environment.
·Wear safety eye protection that meets ANSI
standards.
· Keep clothing, hair, hands, tools, test
equipment, etc. Away from all moving or hot
engine parts.
·Operate the vehicle in a well ventilated work
area: Exhaust gases are poisonous.
·Put blocks in front of the drive wheels and
never leave the vehicle unattended while
running tests.
·Use extreme caution when working around the
ignition coil, distributor cap, ignition
wires and spark plugs. Theses components
create hazardous voltages when the engine is
running.
·NEUTRAL (for manual transmission) and make
sure the sparking brake is engaged.
· Keep a fire extinguisher suitable for
Creator C50X Single vehicle & OBDII Scanner
3
gasoline/chemical/electrical fires nearby.
· Don’t connect or disconnect any test
equipment while the ignition is on or the
engine is running.
· Keep the scan tool dry, clean, free from
oil/water or grease. Use a mild detergent on
a clean cloth to clean the outside of the scan
tool, when necessary.
Creator C50X Single vehicle & OBDII Scanner
4
2. Using the Scan Tool
2.1 Tool Description
Creator C50X Single vehicle & OBDII Scanner
5
① DLC -- Data Link Connector (DLC), Use to
connect the scan tool to the vehicle;
② LCD DISPLAY -- Indicates test results. Color,
320 x 240 pixel display with contrast adjustment
③ KEY BROAD – include [ ][ ][ ][ ][ ]
[ ] [HELP]
④ TF card -- use to store the application
software;
2.2 Specifications
A) Display: Color, 320 x 240 pixel display with
contrast adjustment
B) Operation Temperature: - 20 ℃ -- 75 ℃
C) Storage Temperature: -40 ℃ -- 120 ℃
D) Power: 8V -- 24V
E) Dimensions:
Length
Width
Height
150mm
85mm
28mm
F) Weight
Net Weight: 350 g
Gross Weight: 500 g
2.3 Accessories Include
A) User’s Manual – Instructions on tool
operations.
B) TF card – use to store the application
software, Capacity: 1GB
Creator C50X Single vehicle & OBDII Scanner
6
2.4 Product Troubleshooting
Vehicle Linking Error
A communication error occurs if the scan tool
fails to communicate with the vehicle’s ECU
(Engine Control Unit). You need to do the
following to check up:
A) Verify that the ignition is ON;
B) Check if the scan tool’s OBD II connector
is securely connected to the vehicle’s DLC;
C) Verify that the vehicle is OBD2 compliant;
D) Turn the ignition off and wait for about 10
seconds. Turn the
E) Ignition back to on and continue the testing.
F) Verify the control module is not defective
Scan tool doesn’t power up
If the scan tool won’t power up or operates
incorrectly in any other way, you need to do the
following to check up:
A) Check if the scan tool’s OBD II connector
is securely connected to the vehicle’s DLC;
B) Check if the DLC pins are bent or broken.
Clean the DLC pins if necessary.
C) Check vehicle battery to make sure it is still
good with at least 8.0 volts.
Creator C50X Single vehicle & OBDII Scanner
7
3. C50X series Model description
Model
Support vehicle
C501
BMW & OBDII/EOBD
C502
BENZ & OBDII/EOBD
C507
HONDA/ACURA & OBDII/EOBD
C508
FIAT & OBDII/EOBD
…
…
4. Software Function
CATION: Don’t connect or disconnect any test
equipment with ignition on or engine running.
1) Turn the ignition off.
2) Locate the vehicle’s 16-pin Data Link
Connector (DLC)
3) Plug into the scan tool cable connector to the
vehicle's DLC ，the scan tool will be light.
As shown
4) Turn the ignition on. Engine can be off or
running
Creator C50X Single vehicle & OBDII Scanner
8
5) Wait for a moment to enter select vehicle menu
USE the key [ ][ ][ ][ ] to select in the [SEL.
VEHILCE] , and press [ ] to selection the vehicle which
you want to diagnostic
Creator C50X Single vehicle & OBDII Scanner
9
4.1 System setting
Select [ ] in the [SEL. VEHICLE] and press [ ].
The screen will display the interface as shown below:
The scanner allows you to make the following adjustments
settings;
A.SYSTEM INFORMATION
Choose [SYSTEM INFORMATION] and press [ ].
The screen will display the interface as shown below:
Creator C50X Single vehicle & OBDII Scanner
10
Press [ ] or [ ] to return the [SYSTEM SETTING]
B.BEEPER
Choose [BEEPER] and press [ ], the screen will display
the interface as shown below:
Press [ ][ ] to select, and press [ ] to confirm.
C.LANGUAGE SETUP
Choose [LANGUAGE SETUP] and press [ ], the screen will
display the interface as shown below:
Table des matières
Autres manuels Creator Accessoires automobiles
