Creative T6 Series Instructions d'utilisation et de sécurité

© 2012 Creative Technology Ltd. All rights reserved. Creative and the Creative logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. iPod, iPhone, iPad and Mac are trademarks of Apple, Inc., registered in the U.S. and other countries. The Bluetooth®word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by

Creative Technology Ltd is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. aptX is a trademark of CSR plc. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Use of this product is subject to a limited warranty. Actual contents may

differ slightly from those pictured.

AC IN

Right Satellite Speaker

Left Satellite Speaker

Audio In - To analog in

USB - USB Audio

Audio Control Pod

Bass Level Control

541

8 9 10

Product Overview

Note: Allow the flashing LED indicators to stop after plugging the speaker system to the mains. This indicates that the speaker system is initialized and ready to be

powered ON.

+The speaker enters power saving mode when no audio is detected for approx

10 mins. Alternatively you can power OFF and ON your speaker.

Wall-mountable satellites

Creative T6 Series II satellites are wall-mountable, for more

specific instructions on wall mounting, please consult your wall

mount adapter manufacture’s manual.

For more information, please refer to

creative.com/products/speakers/wallmount

Remote Control overview

To replace the battery in the remote control

• Depress (A) and pull out (B)

• Replace the battery with the positive polarity facing upward and push (B) back

to remote control

BThe remote control uses a

CR2025 3V lithium coin battery

AUDIO CONTROL POD

Headphone

Power ON/OFF +

Source

CONNECT Button - Bluetooth Pair and Connection

AUX In - Auxiliary line-in for Audio Devices

SLAMTM Subwoofer

Power

AUX Source

Volume +

Previous Track

Play/Pause

Bluetooth Stereo

Source

USB Audio

Next Track

Volume -

Connectivity diagram

CAux In/Line In

Windows XP Windows 7 Mac OS

BUSB PC/Mac for 5.1

1. Plug in the USB cable, wait for a series of “Found New Hardware” message to appear on

computer screen.

2. Select Creative T6 USB Audio and click Set default.

3. Switch to “USB” audio by pressing the “USB” button on remote or “Source” button on audio

control pod.

4. Play your music.

[

[• Optional (sold separately)

NOTE: Switch to Aux-In/Line In by pressing the “Aux” button on remote or

“source” button on audio control pod.

ABluetooth®

3. Turn on Bluetooth feature on your device.

4. Search for Creative T6.

5. Pair and connect to Creative T6, if prompted for password, enter 0000.

6. Pairing successful, ready to stream music.

NOTE: A Bluetooth connection will take precedence over a USB audio connection.

1. Power on the speaker and LED status indicator will show green.

2. Press and hold CONNECT button for 3 seconds while Creative

T6 Series II is ON.

Bluetooth

Network

Connections

Operator

Internet

USB

ConnectivityConnectivity

Search results

Creative T6

Creative T6 Creative T6

PASSCODE

0000

CONNECTED

i. ii. iii. iv.

Enjoy audio from Stereo Bluetooth devices

1. Power OFF the speaker.

2. Press and hold Power button for 7 seconds.

3. Creative T6 will auto Power up. When the Blue LED starts to blick, Creative T6

is ready for pairing.

Reset to factory setting

To stop streaming music from the BT-D1 to your receiving Bluetooth device,

simply either plug out the BT-D1 or press the CONNECT button once. Pressing

once more will reconnect the BT-D1 back to its last connected Bluetooth device.

● To disconnect from the BT-D1

1. Power ON the speaker by pressing the Power ON/OFF button.

2. Insert the BT-D1 into PC/Mac USB port.

3. Wait for computer to install hardware.

4. BT-D1 connected when speaker LED shows steady Blue.

NOTE: A Bluetooth connection will take precedence over a USB audio connection.

● Connect your BT-D1 to your speaker

1. LED status indicator.

2. Multi function CONNECT button.

● Enjoy high performance wireless audio via BT-D1

BT-D1 Bluetooth®Audio Transmitter

1. Press and hold CONNECT button for 3 seconds while Creative T6 is ON.

2. Put the BT-D1 into pairing mode for pairing.

3. Press and hold the CONNECT button (BT-D1) for 3 seconds then release.

Wait for LED pattern to turn from Pairing pattern to Connected pattern.

4. Ready to stream music from computer.

● To established a new connection between BT-D1 with

Creative T6

For Mac OS:

a) Go to “System Preferences” ,

choose “Sound”

b) Choose the Output tab, select

“Creative Bluetooth®Audio D1”

. . .

Pairing

Connected (2 sec blink interval)

Table des matières

Autres manuels Creative Intervenants

Creative

Creative Creative Sound BlasterX Katana Manuel utilisateur

Creative

Creative ZIISOUND D5 - Manuel utilisateur

Creative

Creative BLASTERAXX AXX 200 Manuel utilisateur

Creative

Creative Pebble V3 Manuel utilisateur

Creative

Creative D80 Manuel utilisateur

Creative

Creative Omni Manuel utilisateur

Creative

Creative DSxm Guide d'installation

Creative

Creative GIGAWORKS T40 - QUICKSTART BACK Manuel utilisateur

Creative

Creative GIGAWORKS T20 - QUICKSTART BACK Manuel utilisateur

Creative

Creative T15 Wireless Manuel utilisateur

Creative

Creative A 320 Manuel utilisateur

Creative

Creative MUVO Go Manuel utilisateur

Creative

Creative GIGAWORKS T3 Manuel utilisateur

Creative

Creative GIGAWORKS T20 II - QUICKSTART FRONT Manuel utilisateur

Creative

Creative D3xm Mode d'emploi

Creative

Creative D200 Manuel utilisateur

Creative

Creative BLASTERAXX AXX 200 Manuel utilisateur

Creative

Creative Inspire S2 Wireless Manuel utilisateur

Creative

Creative 70SB163000001 Manuel utilisateur

Creative

Creative GIGAWORKS HD50 - QUICKSTART EUROPE Manuel utilisateur

Creative

Creative Pebble V3 Manuel utilisateur

Creative

Creative D5xm Manuel utilisateur

Creative

Creative MUVO 2C Manuel utilisateur

Creative

Creative INSPIRE S2 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur