Creative iRoar Go Manuel utilisateur
Model No.: MF8225
A USER GUIDE TO
Discover the many features of the Creative iRoar Go!
Discover more ways
to experience your
Creative iRoar Go!
http://www.creative.com/support/iroargo
1
2
Technical specification
Bluetooth®
Version: Bluetooth 4.2
Operating Frequency: 2402 - 2480 MHz
DC Output: 5V 1000mA
Energy Saving Information
Power consumption
- Standby/Off : < 0.5 W
- Networked Standby : < 3 W (Bluetooth)
< 3 W (USB)
< 3 W (all network ports activated)
Power Management
- Power consumption < 0.5W after 28 hours inactivity when all network ports are deactivated /
disconnected
- Networked standby within 20 minutes inactivity (Bluetooth, USB)
Activation & deactivation of wireless network port(s)
- To activate, perform Bluetooth device pairing
- To deactivate, disconnect Bluetooth from external device providing the audio source
Power Adapter Information
Model Number: FJ-SW1501600N
Input: 100-240VAC 50/60Hz
Output: 15VDC 1.6A
Operating Temperature range: 0ºC to 45ºC
Water resistance IP ratings: IPX6 (IEC 60529) with port covers closed and tightly sealed.
Supported Bluetooth profiles*:
A2DP (Wireless Stereo Bluetooth), AVRCP (Bluetooth Remote Control), HFP (Handsfree profile)
Supported Codec: SBC, AAC
Operating Range: Up to 10 meters, measured in open space.
RF Output Power: < 4 dBm
Walls and structures may affect range of device.
Supports microSD cards of Class 10 and above, up to 32GB in FAT16/FAT32 format
Supports USB flash drives up to 128GB in FAT16/FAT32/exFAT format
Supported audio formats: MP3, FLAC and WAV (16 bit 48Khz PCM)
Support MP3 up to 320kbps.
Support FLAC up to 1.3Mbps.
Recommended external electret microphone impedance: 2.2k ohm
Records audio in MP3 format.
Note: Compliance markings are located on the bottom of this product.
* Refer to your Bluetooth device (notebook¹, PC¹, or mobile device²) manufacturer’s documentation/
website for supported profiles.
¹ Compatible with PC (Windows 7/8/8.1/10), Apple Macintoshes (Mac OSX 10.10 and above) equipped
with Bluetooth wireless stereo.
² Compatible with most major brands of Bluetooth A2DP enabled mobile phones.
Compatibility Disclaimer
Wireless performance is dependent on your device’s Bluetooth wireless technology. Refer to your
device manufacturer’s manual. Creative will not be liable for any lost of data or leakages resulting
from the use of these devices.
Product Registration
Registering your product ensures you receive the most appropriate service and product support
available. You can register your product during installation or at http://www.creative.com/register.
Please note that your warranty rights are not dependent on registration.
Safe Removal of Built-in Battery
Detailed instructions on removal of integrated battery can be found at creative.com/support/iRoarGo,
these instructions are meant strictly for independently qualified professionals.
1
2
Overview
1. Power button / Battery Status Indicator
2. Volume -
3. Volume +
4. Bluetooth®Button / Status Indicator
5. Source Button
6. NFC touchpoint
7. Source Indicator
8. Button / Status Indicator
9. Equalizer Status Indicator
10. Previous Button
11. Next Button
12. Play / Pause Button
13. Record Button / Recording Status Indicator
14. (Record) Play / Pause Button
15. MP3/FLAC Shuffle Button / Shuffle Playback
Indicator
16. MicroSD Slot
17. Micro USB Connector
18. DC Out (USB 1.0A) / USB Flash drive Connector
19. Aux-In / External Microphone In
20. 15V DC In
21. Microphone
Front Top
2 4
1 3 5 76
817
16 18
19
20
4
9
10
11
13
14
12
15
IPX6 (IEC 60529)
4
21
3
4
Charging your speaker - Power adapter
The dual-purpose battery powers
your iRoar Go and also charges
your smartphone!
Here’s how you do it!
Simply connect a USB cable
to the iRoar Go’s USB DC
Out and the other end to
your smartphone when the
speaker is turned on.
Power Adapter
Battery Life: Up to 12 hours (Actual battery life may vary with use,
settings and environmental conditions)
Use only bundled adaptor
The Lithium-ion battery life may suffer when it is constantly fully
depleted or overexerted at low voltage. It is a good practice to
keep battery well charged.
3 Hours
Assemblng the
Power Adapter
Adapter Model No.: FJ-SW1501600N
Removing the
Power Adapter
3
4
Charging your speaker - Battery status indication
Power Saving
For better user connectivity experience, the iRoar Go automatically enter
auto standby mode after approximately 28 hours of inactivity when the
power adapter is attached via a main outlet to the speaker. This power
saving mode can disabled via the iOS or Android mobile app if desired.
Note: The speaker automatically powers down after 15 minutes when
battery operated if there is no Bluetooth or USB connection, and no
audio recording/playback. This feature helps to protect the internal
battery and cannot be disabled.
Whenever the speaker is connected to the power adapter, the battery status
indicator will continually blink to indicate charging, or be continually lit to
indicate full charge.
Battery full Green
Battery Half Full Orange
Battery low Red
Battery charging Blinking
green
Battery Power Status indication
5
6
Source selection
The Source Indicator lights up to show which source is currently
selected for listening, and you could press the source button to
manually switch between available sources
* If a USB Flash drive and a
Computer USB audio connection
are both present, the USB audio
connection will be given priority.
To hear audio playback from
the USB Flash Drive, please
disconnect the USB connection
to your computer
BT
Source Indicator When?
Waiting for Bluetooth pairing
Waiting for Bluetooth connection
A mobile device is brought close to NFC touchpoint
Recording from internal Mic
Playing back recording
Playing back music from SD card
Connected to computer*
USB Flash drive is inserted*
Aux in cable is inserted
Mic adapter is inserted
Speaker is turned off
SD
USB
Aux
None
Here’s how you do it!
5
6
ON
The iRoar Go connects
to Bluetooth devices.
NFC technology makes
connecting even easier
– just tap and play!
Here’s how you do it!
1A. One-touch pairing with NFC
2Start playback on your
connected device.
OR
B. Manual Bluetooth pairing
(i) Press and hold until the
Bluetooth status LED blinks
white rapidly.
(ii) Select Creative iRoar Go on
your device.
Turn on NFC on your NFC-enabled
device and tap your device on the
NFC logo to connect.
To disconnect, tap your device on
the NFC logo again.
B.
A.
Connecting your speakers - Bluetooth / NFC
The iRoar Go lets you stream music wirelessly.
Powered ON but not
connected to any
Bluetooth devices
Bluetooth Pairing
Mode, waiting for
device to connect
Connected to a
Bluetooth device
Green LED
stays lit
White LED
blinking rapidly
White LED
stays lit
Bluetooth
status LED
Status
7
8
Gain full control of your iRoar Go and enhances your listening experience
with professionally tuned presets and customizable sound controls.
Search for “Sound Blaster Connect” on
the Apple®App StoreTM or Google Play®
Download Sound Blaster Connect for
Mac or PC from
www.creative.com/support/iroargo
iRoar Go apps
For the complete iRoar Go experience
7
8
To toggle between modes, simply just press the button.
Toggles from ON-> Equalizer Mode ->OFF
Here’s how you do it!
Audio settings
Understanding Roar, Custom Audio profiles
and EQ
The iRoar Go is carefully tuned to produce detailed, dynamic and
beautifully natural sound that belies its compact size. Even at high
listening levels, the sound remains well balanced and clean with
minimal compression [NOT common for battery operated portables]
ROAR mode takes this great sound further to a whole new level. Select
ROAR mode to instantly enhance the loudness, depth and spaciousness
of any music. Updated for the iRoar Go, ROAR mode now incorporates
Terabass processing and intelligently compensates for the human ear’s
loss of perceived bass and treble details during low playback level as
well – dramatically improving the fullness and clarity of your music
even at whisper low volumes.
Equalizer mode. Choose from a variety of expertly tuned presets to suit
your listening environment and preference, or use the equalizer option
to fine tune your Roar’s sound, Equalizer mode allows you to make the
sound of the iRoar Go uniquely yours.
To explore the endless possibilities of Equalizer mode, download the
free Android or iOS mobile app now!
9
10
Connect an external microphone to your iRoar Go to
transform it to a portable public address (P.A.) system
The iRoar Go includes a built in microphone preamplifier with limiter
circuitry to help prevent distortion. Compatible with most electret
condenser and dynamic type microphones (cardioid / unidirectional
type microphone are strongly recommended) .
1Connect an external
microphone to the mic adapter
2Plug the adapter into the Aux-in
socket
3Adjust the volume and the
system is ready to use
Here’s how you do it!
If you encounter howling noise
(feedback), try reducing the speaker
volume, facing the microphone away
from the speaker or increasing the
distance from the microphone to the
speaker. Do not cover the microphone
with your hand, as this will increase
the possibility and severity of
feedback.
Understanding the microphone input
Autres manuels pour iRoar Go
1
Table des matières
Autres manuels Creative Intervenants
Creative
Creative Inspire S2 Wireless Manuel utilisateur
Creative
Creative Creative Sound BlasterX Katana Manuel utilisateur
Creative
Creative D200 Manuel utilisateur
Creative
Creative ZiiSound D5x Manuel utilisateur
Creative
Creative SOUND BLASTER ROAR 2 Manuel utilisateur
Creative
Creative TravelSound for iPod nano 4th gen Manuel utilisateur
Creative
Creative Pebble V3 Manuel utilisateur
Creative
Creative GigaWorks T40 Manuel utilisateur
Creative
Creative GIGAWORKS T40 Series II Guide de dépannage
Creative
Creative MUVO Go Manuel utilisateur
Creative
Creative T3150 Wireless Manuel utilisateur
Creative
Creative T15 Wireless Manuel utilisateur
Creative
Creative T6 Series II Manuel utilisateur
Creative
Creative Sound BlasterAxx SBX 20 Manuel utilisateur
Creative
Creative T3150 Wireless Manuel utilisateur
Creative
Creative T60 Manuel utilisateur
Creative
Creative D80 Manuel utilisateur
Creative
Creative SB1390 (SBX 10) Manuel utilisateur
Creative
Creative Inspire S2 Wireless Manuel utilisateur
Creative
Creative AVPSB1660 Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur