Creative Play OCTAVIA OS117 Manuel utilisateur
REF: OS117
pg 1 of 10 26.07.2019
OS117 - OCTAVIA CANOPY (4M)
Installation Instructions
REF: OS117
pg 2 of 10 26.07.2019
UPRIGHT TIMBERS
PARTS REQUIRED
UPRIGHT MAIN TIMBER
UMT - QTY x8
x16
x228 x16
97.M8X120CSK97.M8X80CSK 97.M8X180CSK
REF: OS117
pg 3 of 10 26.07.2019
PARTS REQUIRED
ROOF MAIN SUPPORTS
ROOF SUPPORTS
ROOF BRACES
ROOF TRIM / KING ‘POST’
RT
ROOF ASSEMBLIES
RA
RM
RS
RB
QTY x 1 - RT1 - ROOF CAP
QTY x 1 - RT2 - KING POST
QTY x 4 - RT3a - 6x1 TRIM
QTY x 4 - RT3b - 6 x 1 TRIM
QTY x 8 - RA - ROOF ASSEMBLIES
QTY x 8
QTY x 8
QTY x 8 - RB-L (LEFT)
QTY x 8 - RB-R (RIGHT)
REF: OS117
pg 4 of 10 26.07.2019
FOUNDATION DETAILS
ENTRANCE
NOTES:
POST HOLES 400MM x 400MM
REF: OS117
pg 5 of 10 26.07.2019
FOUNDATION DETAILS
UMT
UAT FGL
REF: OS117
pg 6 of 10 26.07.2019
INSTALLATION INSTRUCTIONS
1
2ATTACH THE RS ROOF TIMBERS
INSTALL THE UMT TIMBERS
USING 2 X M8X80MM WOOD SCREW EITHER END, ENSURE TIMBERS ARE POSITIONED AS SHOWN
ACCORDING TO GROUND PLAN
NOTES:
ENSURE TIMBERS ARE PRE-DRILLED AND
COUNTERSUNK
TIMBERS ARE POSITIONED LEVEL WITH THE TOP
OF THE UPRIGHT TIMBER
RS
UMT
REF: OS117
pg 7 of 10 26.07.2019
INSTALLATION INSTRUCTIONS
3
4REPEAT FOR THE REMAINING RM TIMBERS
ATTACH RM TIMBERS TO KING POST (RT2) AND SCREW TO UPRIGHTS
USING 120MM SCREWS INTO THE KING POST AND 180 SCREWS INTO THE UPRIGHT TIMBERS
USING 2 X M8X120MM & 2 X M8X180MM WOOD SCREWS
NOTES:
ENSURE SCREWS ARE AS SHOWN TO
RIGHT, TAKE CARE NOT TO SPLIT
UPRIGHT TIMBER
2X 120MM PER TIMBER
2X 180MM SCREWS PER END
REF: OS117
pg 8 of 10 26.07.2019
5
6REPEAT FOR THE REMAINING RA - ROOF ASSEMBLIES
SCREW RA - ROOF ASSEMBLIES TO RM TIMBERS
USING 6 X M8X80MM WOOD SCREWS PER SIDE, ENSURE ROOF IS POSITIONED AS SHOWN
INSTALLATION INSTRUCTIONS
RM
REF: OS117
pg 9 of 10 26.07.2019
INSTALLATION INSTRUCTIONS
7
8ATTACH THE RT1 - ROOF CAP
SCREW TRIM TIMBERS TO THE MAIN ROOF SUPPORTS (RM TIMBERS)
USING 4 X M8X80MM WOOD SCREWS
USING 4 X M8X80MM WOOD SCREWS FOR EACH SECTION
RTa
RTa
RTa
RTa
RTb
RTb
RTb
RTb
NOTES:
RTA / B TIMBERS ARE TO BE
POSITIONED ALTERNATELY TO ENSURE THE TIMBERS
DO NOT CLASH - SEE ABOVE FIG 1
ENSURE OVERHANG IS AS SHOWN ABOVE - FIG 2
FIG 1 FIG 2
REF: OS117
pg 10 of 10 26.07.2019
INSTALLATION INSTRUCTIONS
9
10 INSTALLATION COMPLETE
ATTACH ROOF BRACES
PLEASE CHECK ALL SCREWS COUNTERSUNK / NEAT SAND ANY TIMBERS AS REQUIRED
USING 4 X M8X80MM WOOD SCREWS (2 EITHER END) , ENSURE TIMBERS ARE PRE-DRILLED AND COUNTERSUNK
LEFT
RIGHT
NOTES:
COMPOUND CUT FACE IS POSITIONED
AGAINST THE UPRIGHT TIMBER
Table des matières
