CRE Technology I4GEN Mode d’emploi

TECHNICALDOCUMENTATION

A56V0-15_90020-C-EN

Table of contents

Introduction ............................................................................................................................. 4

User's Notice ........................................................................................................................................ 4

Caution Safety Protections .................................................................................................................... 4

Package Contents ................................................................................................................................. 5

Specifications ....................................................................................................................................... 6

Presentation ......................................................................................................................................... 9

Installation ............................................................................................................................. 10

Mechanical Mounting .......................................................................................................................... 10

WIFI Antenna Installation (Optional) ................................................................................................... 10

Power Supply ...................................................................................................................................... 11

Network Connection ............................................................................................................................ 12

Communication ....................................................................................................................... 13

Pre-requisite ....................................................................................................................................... 13

Offline/Online mode ............................................................................................................................ 13

Login/Connection ................................................................................................................................ 14

Easy Connect ..................................................................................................................................... 17

Interface ................................................................................................................................... 22

Search Engine ....................................................................................................................... 23

Controller supervision ............................................................................................. 24

Graphic Objects .................................................................................................................................. 24

Numerical Display ........................................................................................................................... 24

Numerical Display by Variable Number ............................................................................................. 24

Boolean Display (LED) .................................................................................................................... 24

Bar-graph ....................................................................................................................................... 25

Gauge ............................................................................................................................................ 26

3D Pictures .................................................................................................................................... 27

Synchroscope ................................................................................................................................. 28

Pop-up ........................................................................................................................................... 28

Alarm/Fault Page ................................................................................................................................ 30

Visualization ................................................................................................................................... 30

Reset/Acknowledge ........................................................................................................................ 31

Erase Archived Data ....................................................................................................................... 31

Filters ............................................................................................................................................ 32

About Page ........................................................................................................................................ 33

Home Page ......................................................................................................................................... 34

Production curves ............................................................................................................................... 35

Scada ................................................................................................................................................. 37

Controller settings ...................................................................................................... 39

Controller dynamic settings ................................................................................................................. 39

Curves ........................................................................................................................................... 39

Parameters Configuration .................................................................................................................... 40

Editing Windows ................................................................................................................................. 41

Numeric ......................................................................................................................................... 41

List ................................................................................................................................................ 42

Digital Input ................................................................................................................................... 42

Digital/Relay Output ....................................................................................................................... 43

Text ............................................................................................................................................... 43

Password ....................................................................................................................................... 43

Modification by Variable Number .......................................................................................................... 44

Reset factory settings ......................................................................................................................... 44

Update controller firmware .................................................................................................................. 45

i4Gen settings ....................................................................................................................... 46

Language ........................................................................................................................................... 46

TECHNICALDOCUMENTATION

A56V0-15_90020-C-EN

Screen ............................................................................................................................................... 48

Connection ......................................................................................................................................... 49

Network ............................................................................................................................................. 50

Serial port .......................................................................................................................................... 53

File Transfer ....................................................................................................................................... 54

Remote access ................................................................................................................................... 55

Date/time synchronisation .................................................................................................................. 58

Emails ................................................................................................................................................ 59

Production curves ............................................................................................................................... 61

Restart .............................................................................................................................................. 62

Update ............................................................................................................................................... 62

Dimensions ............................................................................................................................... 63

TECHNICALDOCUMENTATION

A56V0-15_90020-C-EN

Introduction

User's Notice

described in it may be reproduced, transmitted or translated into any language in any form or by any means

without written permission of the manufacturer.

This manual contains all the information required for the use of this product to meet the userʼs requirements. It

may change or be corrected at any time without notice.

The manufacturer provides this manual “as is” without warranty of any kind, and will not be liable for any indirect,

special, incidental or consequential damages (including damages for loss of profit, loss of business, loss of use

of data, interruption of business and the like).

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights

of their respective companies. They are used only for identification or explanation and to the ownerʼs benefit,

without intent to infringe.

Caution Safety Protections

Operate the device according to the correct installation steps and with great care to guarantee safety and comfort

using experience. Please refer to the following safety instruction guide to avoid the danger of electric shock or

fire. Please observe the previous safety instruction guide to use and maintain the product and the hard disk to

make sure of a safe operating environment.

·Please follow the instruction manual for the operation guide.

·Make sure to use the device in the appropriate operation temperature range and humidity range.

·To avoid high temperature, please DO NOT overload the maximum power of the external power supply while

the system is consuming high voltage. Be aware of the maximum temperature allowance of the power

supply.

·Always unplug the power cable and other hardware cables from the system before cleaning.

·Use only a dry cloth to clean the product.

·Make sure that there is no heat source nearby when the product is working.

·Make sure that the thermal louver of the product is not blocked.

·Make sure to set up or use the product on a stable surface.

·Make sure not to drop the product or strike it in any way.

·Make sure not to move the product when the power is on.

·Disconnect the power cord from the i4Gen unit prior to any installation. Be sure both the system and all

external devices are turned off. A sudden surge of power could ruin sensitive components.

·Always use the DC-DC converter provided with the unit. It provides a couple of protections, including short

circuit.

·Do not open the system's back cover.

TECHNICALDOCUMENTATION

A56V0-15_90020-C-EN

Package Contents

Note: DC-DC Adapter 9 to 36VDC input for 12VDC output.

Environmental Protection Announcement

Do not dispose of this electronic device into the trash while discarding. To minimize pollution and ensure utmost

protection for the global environment, please recycle.

TECHNICALDOCUMENTATION

A56V0-15_90020-C-EN

Specifications

Display

Front bezel IP65, NEMA 4 rugged protection, metal front bezel

Display type 15.6" With LED Backlight

Brightness (cd/m²) 450 nits

Resolution (Aspect Ratio) 1920 x 1080 (16:9)

Viewing angle (H/V) 170°/170°

Pixel pitch 0.17925 x0.17925 mm

Contrast ratio 800:1

Response time 13 ms

Touchscreen

Type Projected Capacitive type

Active Range 346,00x196,00mm +0,3mm (13,62x7,72in)

Transparency 85%

Operating Force ≤ 80g

Surface Hardness > 6H (JIS-5400)

Case

Panel Material Aluminum

Case Material Iron

Color Silver + white

Coating Requirement Spray Paint

Main System

CPU Intel Braswell n3160 1.6GHz/Quad Core CPU

RAM 4G DDR3L

Storage Support m.2 SATA

I/O Connector

I/O Ports and Switches - 4* USB3.0

- 4* RS232

- 1* HDMI

- 2* GbE LAN

- 1* Lockable Jacky 9-36VV DC input

- 1* Power Button

WIFI Connection

WIFI Module 1*2.4G/5G WIFI A/B/G/N/AC+BT4.0

Watchdog Timer

Output From Super I/O to drag RESETCON#

Interval 256 segments, 0,1,2…255sec/min

Power

Power Input DC version: 9-36V DC with over current protection fuse

Dimensions

Case dimensions 398.81 * 249.12 * 68.80 mm (15.67 * 9.8 * 2.68 in)

Certifications

Certifications - Design for CE, FCC compliance

- Design for IP65 (Front panel)

Environment

Temperature Operating: -10°C ~ 60°C (with W.T. DRAM/HDD in

airflow condition)

TECHNICALDOCUMENTATION

A56V0-15_90020-C-EN

Storage: -20°C ~ 70°C

Humidity 20%~90% (non condensing)

Shock Operating: 15G, 11ms duration

Vibration Operating: 5~500Hz/1 Grms

TECHNICALDOCUMENTATION

A56V0-15_90020-C-EN

I/O System

Icon Name Quantity Description

Power button

(ON/OFF) 1 Press to turn On/Off the system.

DC-in power

connector 1 9-36VDC power supply input (DC-DC converter provided with the

unit must be used to add electrical protections).

HDMI port 1 To connect a display device that supports HDMI specification (not

used).

USB 3.0 port 4 To connect devices compatible with the USB specification. USB 3.0

port supports up to 5Gbps data transfer rate.

RJ-45 LAN port

(Ethernet) 2 This connector is standard RJ-45 LAN jack for network connection.

Both ports are set as a bridge, acting like a switch. WARNING:

Pluging both ports on a same network will result in a network loop,

causing a network failure.

RJ-45 COM port

(Serial port) 1 This connector is standard RJ-45 jack used as a COM serial port

(not used).

COM port 3 This connector is a male DE-9 connector (D-Sub DB-9).

TECHNICALDOCUMENTATION

A56V0-15_90020-C-EN

Presentation

i4Gen is a user interface made by CRE TECHNOLOGY to offer users a complete monitoring of new CRE

TECHNOLOGY controllers.

The unit hardware is a multi-touch screen color display developped for harsh environment and industrial areas,

providing access to all controllersʼ data for control and measurement.

With our advanced touch screen panel, it is possible to manage remote control and monitoring, through an

internet access (Wi – LAN connection), with ZOHO assist© platform, and to use e-mail services, for alarms/faults

management.

Control and Management

Direct display

i4Gen is able to display information from 1 to 32 controllers using the Ethernet connection and shows a basic

overview of the power plant by using controller CANbus data when applicable.

Easy Connect

This function permit to quickly switch the connection between controllers. Automatically detects CRE

TECHNOLOGY controllers on an Ethernet network.It allows to automatically configure CRE TECHNOLOGY

controllers IP address to be able to access them with the current network configuration.

Multi user display

Several i4Gen can be securely connected by an Ethernet hub to a single controller (or a group of controllers). An

i4Gen display has two Ethernet communication ports. Easy to use for redundancy application multi-level access

or long-distance monitoring panel. One i4Gen display can also be connected to different and several COMPACT

platforms.

Internet connection

With WIFI connection, or LAN cable connexion, i4Gen can be easily connected on internet, to manage remote

monitoring or remote control, and emails management.

Events displayed/recorded

An innovative feature turns major alarms and faults into 3D graphical object display, to warn the operator about

an important event and facilitate immediate diagnosis (ex: coolant tank lights up in red in case of coolant temp

fault or in orange in case of coolant temp alarm).

An event alarm/fault recorder is also available on a dedicated display page, indicating timestamps, status,

acknowledgment, and corresponding variable; the event page can be filtered for diagnosis and investigation of

selected variables.

Compatibility

i4Gen is compatible with the following controller versions:

- GENSYS COMPACT PRIME: v2.10 or later

- GENSYS COMPACT MAINS: v2.10 or later

- AMF COMPACT: v2.10 or later

- SYNCHRO COMPACT: v2.10 or later

- MASTER COMPACT: v2.10 or later

- MASTER COMPACT 1B: v2.10 or later

- BTB COMPACT: v2.10 or later

- PV COMPACT: v2.30 or later

- BAT COMPACT: v2.30 or later

TECHNICALDOCUMENTATION

A56V0-15_90020-C-EN

Installation

Mechanical Mounting

Install i4Gen position at eye level and at a brightness-less location.

Frame cut-out (height x width): 160x305mm (6.3x12.01in).

Chassis Fixed Parts

1. Insert the corresponding edges of the fixed part into the slots until they match.

Make sure that the fixed part is installed as shown in the picture, with protruding tips

upwards.

2. The models that support this fixing mode have slots reserved on the edges of the

module's case. The user can choose the height or position of the installation spot.

3. Tighten the screw so that the fixed part can be fitted into the slots tightly. Install

other fixed parts to the system in the same way.

WIFI Antenna Installation (Optional)

Screw the two antennas on the antenna heads connectors:

Autres manuels pour i4GEN

Table des matières

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien

CRE Technology i4GEN Mode d’emploi

Manuels Équipement d'enregistrement populaires d'autres marques