Craig CC430 Manuel utilisateur
FCC INFORMATION
1
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not used
these instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment of and on, the user is encouraged to try to
correct the interference by one or more of the following
mesures:
~ Reorient or relocate the receiving antenna.
~ Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
~ Consult the dealer or an experienced radio radio/TV
technician for help.
LOCATION OF CONTROLS
2
Reset
USB Microphone
Built-in Speaker Power Button
(on the side of unit)
Volume Button Return Button
Menu/Confirm Button
3
Power Button:
Press and hold to Power On/Off.
In power On mode, press to turn off the display to enter
to standby mode (For saving battery power). Press
again to turn back the display.
Volume Button:
In display illuminate mode, touch to enter to volume
setting menu.
Return Button:
In display illuminate mode, touch to return to previous
setting menu.
Menu/Confirm Button:
In display illuminate mode, touch to enter to setting
menu. Touch repeatedly to change setting menu.
In setting mode, touch to confirm the settings and exit.
USB Port:
For charging only.
Reset Button:
If the unit become to abnormal operation or halt. Press
the button by a small screwdriver (Not supplied) to reset
the unit.
●
●
●
●
●
●
●
●
4
POWER SOURCE
The unit has a built in DC 3.7V, Li-poly rechargeable
battery, recharge it before first time use (or when the
battery was consumed, “ ” appear on the display) as
follows:
1. Take out the unit from the watch strap as the figure
below very carefully:
NOTES:
Take out the unit from metallic buckle side first as
figure A above. Then take out whole unit as figure B.
Make sure the direction you take out the unit is
correct. Otherwise, the unit and strap may damage.
Fig BFig A
●
●
5
2. Connect the small plug from the supplied USB Charging
Cable to the Micro USB Port on the unit.
3. Connect the full size USB plug to the USB port on a
computer or any USB charger having DC 5V output as
the figure below. Charging will auto start. During charging,
the charging indicator “ ” will appear on the display.
When finished, the completed charging indicator “ ”
will appear on the display.
NOTES:
Your battery will last longer if you following these simple
guidelines for charging and storing.
A. Recharging and store the unit within the temperature
range of 5°C~35°C (40°F~95°F).
B. Do not over charge (longer than 24 hours). Excessive
charging or discharging may shorten the battery’s life.
C. Battery life naturally shortens slowly over time.
D. The rechargeable battery incorporated in this product is
not user replaceable.
Android Phones:
If you are using Android phones, download and install the
app “Craig Smart Watch” from Google Play into your cell
phone before first time use.
Compatible Android Phones List:
Samsung: Galaxy S3/S4/S5, Note II/III/IV
LG: Nexus4/5/7
Moto: E/G/X
And newer version and other brands Android phones, for
details, please consult the phone's shop.
6
APPS (APPLICATIONS) INSTALLATION
iPhone:
If you are using iPhone, you are no need to download any
apps from the apps store. For details operations, please
refer to page 22.
Compatible iPhone List:
iPhone 4S/5/5S/5C/6/6 Plus
ANDROID PHONE:
BLUETOOTH PAIRING:
In first time use, pairing the unit to your cell phone as
below:
BT PAIRING AND SETTING
7
1. After installed the apps from Google Play store into your
cell phone, find the app “Craig Smart Watch” in your
phone then open it, the follows picture will appear on
the screen:
NOTE: If touch “Register Later” to skip, the exersice data
cannot be record.
8
2. Touch the “Registration” Button on the screen to enter.
Then start to register your personal information into the
phone as the on screen instructions as below. (Make
sure the phone number you enter is the real phone
number of your cell phone.)
Phone
Nicknames
Password
Repeat the password
NOTE: Make sure your network is activate, or it would not
be registered successfully.
9
3. Touch the “YES” Button on the screen to enter. Then
start to set your personal information:
NOTE: Email address is required to write. If you forgotten
your password, it can help you to get the password.
~ Birthday: Set or reset your birthday (age).
~ Gender: Set or reset your gender.
~ Height: Set or reset your height in inch.
~ Weight: Set or reset your weight in lbs.
~ Email Address: Set or reset your email.
Table des matières
