Craig CHT914c Manuel utilisateur

Size: 148.5(W) x 210(H)mm (A5)

CONVERTIBLE

SPEAKER SYSTEM

CONVERTIBLE

SPEAKER SYSTEM

Model: CHT914c

PLEASE READ BEFORE OPERATING THIS EQUIPMENT.

Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

arranged so it will not drape over a laptop, etc. Where it can be pulled on by children or tripped over accidentally.

This unit has a long AC cord and other long cord that can easily be tripped on or pulled on, causing injury. Please make sure

it is arranged so it will not drape over a laptop, etc. Where it can be pulled on by children or tripped over accidentally.

This unit has a long AC cord and other long cord that can easily be tripped on or pulled on, causing injury. Please make sure

it is

INSTALLATION

123

Method 1: Assemble the main unit and L Speaker together :

Left Speaker

Supplied

Wooden Stand

Supplied Metallic

Screws and Washers

Method 2: Assemble Main Unit and L Speaker individually :

Main unit Left Speaker

Supplied

Wooden Stand

Supplied Metallic

Screws and Washers

Lock the Hook on the rear of left

speaker to the Main unit as Fig. 4

This unit can be assembled as the following methods:This unit can be assembled as the following methods:

Main Unit

Left Speaker

Decorative Inserts

Note: We supplied total two Wooden Stands and 4 sets Metallic Screws/Washers.Keep the

excess accessories in this assembly method for future use.

The speaker net can be take out and reassembly as the Figure below:

Black wire

Red wire

Main Unit Left Speaker

AC 120V~ 60Hz

SPEAKE R

ANT

AUX IN 1

OFF

POWER

After above installation, connect the connection wires (Red and Black) from L Speaker to

the Speaker Connectors on the rear of Main Unit as the figure below:

(Play/Pause) button

TUNE - button

SOURCE button

EQ (Equalizer) button

Indicator

Remote Sensor

VOL+ (Volume Up) button

/ TUNE + button

VOL- (Volume Down) button

AUX IN 1 jacks

FM Antenna

AUX IN 2 jack

MAIN UNIT

LOCATION OF CONTROLS

INDICATOR AUX IN 2

EQ SOURCE VOL- VOL+

TUNE- TUNE+

INDICATOR AUX IN 2

EQ SOURCE VOL- VOL+

POWER

TUNE- TUNE+

9876

AC 120V~ 60Hz

SPEA KER

ANT

AUX IN 1

OFF

POWER

ANT

AU X IN 1

OFF

POWER

(Power) button

POWER ON /OFF switch

10.

11.

12.

13.

14.

REMOTE CONTROL

1. POWER button

2. /TUNE - button

3. VOL (Volume)+/- buttons

4. SOURCE button

5. (Mute) button

6. / TUNE+ button

7. (Play/Pause) button

8. EQ (Equalizer) button

LOCATION OF CONTROLS

%$77(5<35(&$87,216

EFFECTIVE DISTANCE OF REMOTE TRANSMITTER

Approx.15 feet

BATTERY INSTALLATION--- REMOTE CONTROL

Remote Sensor (on the

-First Time Use

Remove and discard the insulation tab from the battery tray as figure on the right.

-Replacing Batteries For Remote Control

1. Push and slide out the battery holder as figure 1 below.

2. Replace the battery with a new CR2025 button cell as the polarity

markings on the rear of the Remote Control.

3. Close the battery holder.

Fig.1 Fig.2 Fig.3

front of the main unit)

INDICATOR AUX IN 2

EQ SOURCE VOL- VOL+

POWER

TUNE- TUNE+

GENERAL OPERATIONS

1. Insert the plug from AC Power Cord into AC wall outlet having AC 120V~ ; 60Hz.

corresponding color as below:

4. During Playback:

~ Press the VOL (Volume) +/- buttons to adjust volume level as desired.

~ Press the EQ button repeatedly to select and set equalizer mode as to Jazz; Pop; Classic or Rock.

~ Press the (Mute) button on the Remote Control to turn off the sound. Press again to resume.

5. When finished listening, press the Power button to .

NOTE:

3. Press the SOURCE button repeatedly to switch to desired mode.The indicator will turn to the

as desire. ( .)

To reset the EQ to normal mode, power Off then power On the unit

turn the unit to Power Off (Standby) mode.

If long period of time will not use the unit, shut off the unit by press the POWER ON/OFF switch on

the rear of main unit to OFF position

from Standby mode.

Insert the AC plug into a conveniently located AC outlet having AC 120V~ ; 60Hz.

NOTE: The AC plug supplied with the unit is polarized to help minimize the

obsolete outlet.

possibility of electric shock. If the AC plug dose not fit into a non polarized

AC outlet, do not file or cut the wide blade. It is the user's responsibility to

have an electrician replacing the

POWER SOURCE

~ Purple: AUX IN 1

~ Orange: AUX IN 2

~ Blue: Bluetooth

~ Green: Radio

2. Press the Power ON/OFF switch on the rear of the Main Unit to ON position.The Red Indicator

will light.Then press the Power button on the Main Unit or Remote Control to power on the

unit

or unplug the AC Cord from wall outlet.

FM Antenna

LISTEN TO FM RADIO

1. Power ON the unit as previous procedures.

2. Press the SOURCE button repeatedly until the color of Indicator changes to Green.

4. Repeat the same procedures until the desired radio station is received.

NOTE: If the received FM station is in stereo mode, the unit will play it in stereo mode automatically.

3. Press and hold the /TUNE - or /TUNE + buttons until the indicator starts blinking.

The unit will start to search next (or previous) available FM radio station then plays.

The Antenna wire on the rear of Main Unit is for radio reception. If reception is weak, unwind and

extend the wire or relocate the wire to improve the radio reception.

White

Red

LISTEN TO TV/DVD/VCR/DVR

X IN 1

Audio out jacks on

TV/DVD/ VCR/DVR

DVD

AUX IN 1

N 1

4. Press the SOURCE button repeatedly until the color of Indicator changes to Purple.

1. Connect one end of supplied RCA audio connection cable to the AUX IN 1 jacks on the rear

of the unit as the figure above.

2. Connect the other end to the Audio out jacks on the external player (such as Television, VCR, DVD

Player, DVR ... etc.).

5. Plays the music in the external player as usual. (Make sure the volume output level of the player is

in high level. Otherwise, sound from this unit is weak).

3. Power ON the unit as previous procedures.

A UX IN 1

AC 120V~ 60Hz

SPEAK ER

ANT

AUX IN 1

OFF

POWER

Table des matières

Autres manuels Craig Système de haut-parleurs

Craig

Craig CHT9810 Manuel utilisateur

Craig

Craig CHT973 Manuel utilisateur

Craig

Craig CHT939 Manuel utilisateur

Craig

Craig CHT985 Manuel utilisateur

Craig

Craig CHT912 Manuel utilisateur

Craig

Craig TA-304B Manuel utilisateur

Craig

Craig CHT940DO Manuel utilisateur

Craig

Craig CHT940 Series Manuel utilisateur

Craig

Craig CHT921 Manuel utilisateur

Craig

Craig CHT884 Manuel utilisateur

Craig

Craig CHT988 Manuel utilisateur

Craig

Craig CHT915 Manuel utilisateur

Craig

Craig CHT756 Manuel utilisateur

Craig

Craig CHT823DG Manuel utilisateur

Craig

Craig CHT820DG Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur