Craftsman 917.389621 Manuel utilisateur

-Owner's Manual

ICRAFTSMBN'I

6.0 HORSEPOWER

21" MULTI-CUT

ROTARY LAWN MOWER

Model No.

917.389621

•Safety

•Assembly

•Operation

•Maintenance

•Espa_ol

•Repair Parts

NOTE: Engines which are certified to comp/y with California and U.S. EPA emission regulations

for SORE (Small Off Road Equipment), are certified to operate on regular unleaded gasoline, and

include the following emission control systems: Engine Modification (EM), and Three-way

Catalyst (TWC) (if so equipped).

AVISO: Los motores homologados para cumplir con la rnglamentaci6n sobre emisiones de

California y de la Agenda de proteccibn Ambtental estadounidense (EPA) para equipos

pequei_osno circulantes (SORE) funciooan con gasolina normal sin plomo, e incluyen los

siguientes sistemas de control de emislones: medificacibn del motor (EM) y catalizador de triple

accibn (TWC) (en caso de tenet!o).

The D.O,M. decal includes engine life specifications for the emissions-related useful life period of

your engine. This peded relates to the emission compliance life as certified by EPNCARI_ To

find the/ife period specification for your engine, please match one of the following letters with the

letter pdnted on your D.O.M. decal: (C) 125 hours, (B) 250 hours, (A) 500 hours.

La calcoman|a D.O.M. induye espectiicaciones sobre la duraci6n del motor pars el perfedo de

vida ,',tilde su motor relaeJ'.,lonedocon emisiones. Este perledo se relaciona con la dursck_nen

confownidedcon las emisiones segOn Io cert_cado por EPA/CARB. Pars hallar la especiflcacibn

del pedodo de vida de su motor, mire oudl de las siguientes letres viene impresa en su

calcomanla D.O.M,: (C) 125 horas, (B) 250 hares, (A) 500 horas.

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Sears, Roebuck and Co, Hoffman Estates, IL 60179

VisitourCraftsmanwebsite: www sears.condcraftsman

Warranty ............................................... 2

Safety Rules ......................................... 2

Assembly .............................................. 5

Operation .............................................. 6

Maintenance Schedule ...................... 10

Maintenance ....................................... 10

Product Specifications........................ 11

Service and Adjustments .................... 13

Storage ............................................... 14

Troubleshooting ................................. 16

Repair Parts........................................ 34

Parts Ordedng ..................... Back Cover

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER

For two years from date of purchase, when this Craftsman Lawn Mower is maintained,

lubricated, and tuned up according to the operating and maintenance instructionsin

the owner's manual, Sears will repair flee of charge any defect in matsdal or workman-

ship.

If this Craftsman Lawn Mower isused for commercial or rental purposes, this warranty

applies for only 90 days from the date of purchase.

ThisWarranty does not cover:

• Expendable items which become worn during normal use, such as rotarymower

blades, blade adapters, belts, air cleaners and spark plug.

• Repairs necessary because of operator abuse or negligence, including bent

crankshafts and the failure to maintain the equipment according to the instructions

contained in the owner's manual.

Warranty service is available by returning the Craftsman power mower to the nearest

Sears Service CenterlDepartment in the United States. This warranty applies only

while this product is in use in the United States.

This Warranty gives you specific legal dghts, and you may also have other dghts which

varyfrom state tostate.

Seers, Roebuck and Co., D/817 WA, Hoffman Estates, Illinois 60179

IMPORTANT: This cutting machine is capable of amputating hands and feet and

throwing objects. Failure to observe the followingsafety instructionscould result in

sedous injury or death.

I.GENERAL OPERATION

•Read, understand, and follow all

instructionson the machine and in the

manual(s) before starting. Be thor-

oughly familiar with the controlsand the

proper use of the machine before

starting.

• Do not put hands or feet near or under

rotatingparts. Keep clear of the

discharge opening at all times.

•Only allow responsible individuals, who

are familiar with the instructions,to

operate the machine.

•Clear the area ofobjects such as rocks,

toys, wire, bones, sticks, etc., which

could be picked up and thrown by the

blade.

•Be sure the area is clear of other

people before mowing. Stop machine if

anyone enters the area.

•Do not operate the mower when

barefoot or weedng open sandals.

Always wear substantial foot wear.

•Do not pull mower backwards unless

absolutely necessary. Always look

down and behind before and while

moving backwards.

• Do notoperate the mower without

proper guards, plates, grass catcher or

other safety protective devices in

place.

•See manufacturer's instructionsfor

proper operation and installation of

eccessodes. Only use accessories

2 approved by the manufacturer.

•Stop the blade(s) when crossing gravel

ddves, walks, or roads.

• Stop the engine (motor) whenever you

leave the equipment, before cleaning

the mower or unclogging the chute.

•Shut the engine (motor) off and wait

untilthe blade comes to complete stop

before removing grass catcher.

• Mow only in daylight or good artificial

light.

•Do not operate the machine while

under the influence of alcohol or drugs.

•Never operate machine in wet grass.

Always be sure of your footing:keep e

firm hold on the handle and walk; never

run.

•Disengage the self-propelled mecha-

nism or drive clutchon mowers so

equipped before starting the engine

(motor).

•If the equipment should start to vibrate

abnormally, stop the engine (motor)

and check immediately for the cause.

Vibration is generally a warning of

trouble.

•Always wear safety goggles or safety

glasses with side shields when

operating mower.

I1.SLOPE OPERATION

Slopes are a major factor related to slip

and fall accidents which can result in

severe injury.All slopes require extra

caution. Ifyou feel uneasy on a slope, do

notmow it.

DO:

•Mow across the face of slopes: never

up and down. Exercise extreme caution

when changing direction on slopes.

•Remove obstacles such as rocks, tree

limbs,etc.

•Watch for holes, ruts, or bumps. Tall

grass can hide obstacles.

DO NOT:

•Do not trim near drop-offs, ditches or

embankments. The operator could lose

footing or balance.

•Do not trim excessively steep slopes.

•Do not mow on wet grass. Reduced

footing could cause slipping.

III. CHILDREN

Tragic accidents can occur if the operator

isnot alert to the presence of children.

Childrenare often attracted to the

machine and the mowing activity. Never

assume that children will remain where

you last saw them.

•Keep children out of the trimming area

and under the watchful care of another

responsible adult.

•Be alert and turn machine off if children

enter the area.

•Before and while walking backwards,

look behind and down for small

children.

•Never allow children to operate the

machine.

•Use extra care when approaching blind

comers, shrubs,trees, or other objects

that may obscure vision.

IV. SERVICE

•Use extra care in handling gasoline

and other fuels. They are flammable

and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel

with the engine running.Allow

engine to cool before refueling. Do

not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel

container inside where there is an

open flame, such as a water heater.

•Never run a machine inside a closed

area.

•Never make adjustments or repairs with

the engine (motor) running. Disconnect

the spark plug wire, and keep the wire

away from the plugto prevent acciden-

tal starting.

•Keep nuts and bolts, especially blade

attachment bolts, tight and keep

equipment in good condition.

•Never tamper with safety devices.

Check their proper operation regularly.

•Keep machine free of grass, leaves, or

other debris build-up. Clean oil or fuel

spillage. Allow machine to cool before

storing.

•Stop and inspect the equipment if you

stdke an object. Repair, ifnecessary,

before restarting.

•Never attempt to make wheel height

adjustments while the engine (motor) is

running.

• Grass catcher components are subject

to wear, damage, and deterioration,

which could expose moving parts or

allow objects to be thrown. Frequently

check components and replace with

manufacturer's recommended parts,

when necassan/.

•Mower blades are sharp and can cuL

Wrap the blade(s) or wear gloves, and

use extra caution when servicing them.

•Do not change the engine governor

3 setting or overspeed the engine.

•A_J_ookfor this symbolto pointout

importantsafety precautions. It means

CAUTION!!] BECOMEALERT!!! YOUR

SAFETY IS INVOLVED.

A CAUTION: In orderto prevent

accidental starting when setting up,

transporting, adjusting or making repairs,

always disconnect spark plug wire and

placewire where it cannot contact spark

plug.

CAUTION: Muffler and other engine

parts become extremely hot dudng

operation and remain hot after engine

has stopped. To avoid severe burns on

contact, stay away from these areas.

_WARNING: Engine exhaust, some of its

constituents, and certain vehicle

components contain or emit chemicals

known to the State of Califemia to cause

cancer and birth defects or other

reproductive harm.

AWARNING: Battery posts,terminals and

related accessories contain lead and lead

compounds, chemicals known tothe State

of Califomia to cause cancer and birth

defects or other reproductiveharm. Wash

hands after handling.

These accessories were available when this lawn mower was produced. They are not

shipped with your mower. They are also available at most Sears retail outletsand

servicecenters. Most Sears stores can also order repair parts for you, when you

providethe model number ofyour lawn mower. Some of these accessories may not

apply to your lawn mower.

LAWN MOWER PERFORMANCE

CLIPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWERS

GRASS CATCHERS

FOR

REAR DISCHARGE

LAWN MOWERS

MULCHERK_S

GRASS CATCHERS

FOR

SiDE DISCHARGE

LAWN MOWERS

LAWN MOWER MAINTENANCE

MUFFLERS

BELTS BLADES

AIR FILTERS

BLADE ADAPTERS WHEEL

STABILIZER

GAS CANS

SPARK PLUGS

ENGINE OIL

Read these instructionsand this manual in 3. Remove any packing material from

its entirety before you attempt to assemble

or operate your now lawn mower.

IMPORTANT: This lawn mower is shipped

WITHOUT OIL OR GASOLINE inthe

engine.

Your now lawn mower has been as-

sembled at the factory with the exception

ofthose parts left unassembled for

shipping purposes. All parts such as nuts,

washers, bolts, etc., necessary to complete

the assembly have been placed in the

parts bag. To ensure safe and proper

operation of your lawn mower, all parts

and hardware you assemble must be

tightened securely. Use the correct tools as

necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM

CARTON

1. Remove loose parts included with

mower.

2. Cut down two end comers of carton

and lay end panel down flat.

3. Remove all packing materials except

padding between upper and lower

handle and padding holding operator

presence control bar to upper handle.

4. Roll lawn mower out of carton and

check carton thorougly for additional

loose parts.

HOWTO SET UPYOUR LAWN

MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle cerefufly so

as not to pinch or damage conh*olcab|es.

1. Raise lower handle section to operat-

ing position and squeeze the bottom

ends of lower handle towards each

other until the pin in handle can be

inserted into one of the three height

adjustment holes.

2. Remove protective padding, raise

upper handle section into place on

lower handle and tighten both handle

knobs.

around control bar.

Your handles may be adjusted for your

mowing comfort. Refer to Service and

Adjustmentssection of this manual.

Operator presence

control bar

Upper handle

Liftup

Mowing

Lower handle

Handle pin

3-Position

handle adjustment

bracket J

TO INSTALL ATTACHMENTS

Your lawn mower was shipped ready to

be used as a mulcher. To convert to

bagging or discharging, see "To convert

mower=in the OPERATION section of this

manual.

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR

LAWN MOWER. Compare the illustrationswith your lawn mower to familiarize yourself

with the location of vadous controlsand adjustments. Save this manual forfuture

reference.

These symbols may appear on your lawn mower or In literature supplied with the

product. Learn and understand their meaning.

CAUTION ENGINI_ ENGINE FA_T _.OW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARN)NG ON OFF AND REET AWAY

• Operator presence control

bar

Handle knob

Grass catcher _

Gasoline filler cap

Engine oil cap

Mulcher door

IMPORTANT: This lawn mower is shipped

WITHOUT OIL OR GASOLINE inthe

engine.

Lawn mower housing

MEETS CPSC SAFETY REQUIREMENTS

Sears rotarywalk-behind power lawn mowers conform to the safety standards of the

Amedcan National Standards thstJtute and the U.S. Consumer Product Safety Commis-

sion. The blade turns when the engine is running.

Operator Presence Control Bar- must Primer - pumps addiUonal fuel from the

be held down to the handle to start the carburetor to the cylinder for use when

engine, Release to stop the engine, starting a cold engine.

Starter Handle - used for starting the

engine.

Theoperationof any lawn

mower can result in

foreign objects thrown into

the eyes, which can result

in severe aye damage.

Always wear safety glasses or eye

shields while operating your lawn mower

or performingany adjustments or repairs.

We recommend a wide vision safety

mask over spectacles or standard safety

glasses.

HOWTO USEYOUR LAWN MOWER

ENGINE SPEED

The engine speed was set at the factory

for optimumperformance. Speed isnot

adjustable.

ENGINE ZONE CONTROL

_CAUTION: Federal regulations require

an engine controlto be installed on this

lawn mower in order to minimize the risk

ofblade contact injury. Do not under any

cimumstancesattempt to defeat the

function of the operator control.The blade

turnswhen the engine is running.

• Your lawn mower is equipped with an

operator presence control bar which

requiresthe operator to be positioned

behind the lawn mower handle to start

and operate the lawn mower.

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower

wheels for highcut, adjust cutting height

to suit your requirements. Medium

positionis best for most lawns.

To change cutting height, squeeze

adjuster lever toward wheel. Move

wheel up or down to suit your require-

ments. Be sure all wheels are in the

same setting.

NOTE: Adjuster is propedy pes'dioned

when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

platetabs.

LowerWheelsforHighCut

Pla_

RaiseWheelsfor LowCut

TO CONVERT MOWER

Your lawn mower was shipped ready to

be used as a mulcher. Toconvert to

bagging or discharging:

REAR BAGGING

•Liftrear door of the lawn mower and

place the grass catcher frame hooks

onto the door pivot pins.

• To convert to mulching or discharging

operation, remove grass catcher and

close rear door.

Pivotpins

SIDE DISCHARGING

•Rear door must be closed.

•Open mulcher door and install dis-

charge deflector under guard as

shown.

•Mower is now ready for discharging

operation.

•To convert to mulching or bagging

operation, discharge deflector must be

removed and mulcher door must be

closed.

SIMPLE STEPS TO REMEMBER WHEN

CONVERTING YOUR LAWN MOWER

FORMULCHING-

1. Rear door closed.

2. Mulcher door closed.

FOR REAR BAGGING -

1. Grass catcher installed.

2. Mulcher door closed.

FOR SIDE DISCHARGING -

1. Rear door closed.

2. Side discharge deflector installed.

•,CAUTION: Do not runyour lawn

mower without rear door dosed or

approved grass catcher in place.

Never attempt to operate the lawn mower

with the rear door removed or propped

open.

Mulcher

door

•Open

MulcherDoor

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in

the engine. Engine holds 20 oz. of oil.

Fortype and grade of oil to use, see

_ENGINE" in Maintenance section of this

manual.

1. Be sure lawnmower is level and area

around oil fill is clean.

2. Remove engine oil cop and fill to the

full line on the dipstick.Pour oil slowly•

Do not over fill.

NOTE: Allow oil to settle down into engine

for accurate reading. To read proper level,

tighten engine oil cop, then remove itto

read the dipstick.

3. Reinstall engine oil cop and tighten.

• Check oil level before each use. Add

oil if needed. Fillto full line on dipstick•

•Change the oil after every 25 hours of

operationor each season. You may

need to change the oil more often

under dusty, dirty conditions.

ADD GASOLINE

• Fill fuel tank. Use fresh, clean, regular

unleaded gasoline with a minimum of

87 octane. Do not mix oil with gaso-

line. Purchase fuel in quantities that

con be used within 30 days to assure

fuel freshness.

AWARNING: Experience indicotesthat

alcohol blended fuels (called gasohol or

using ethanol or methanol) con attract

moisture which leads to separation and

formation of acids during storage• Acidic

gas con damage the fuel system of an

engine while in storage. To avoid engine

problems, the fuel system should be

emptied before storage of 30 days or

longer. Drainthe gas tank, start the

engine and let it run untilthe fuel lines

and carburetor are empty. Use fresh fuel

nextseason. See Storage Instructionsfor

additional information. Never use engine

or carburetor cleaner products in the fuel

tank or permanent damage may occur.

_, CAUTION: Fillto bottom ofgas tank

fillerneck. Do not overfill. Wipe off any

spilled oil or fuel. Do not store, spill or

use gasoline near an open flame.

Engine _Y=I_ Gasoline fiUer

cap____ cap

TO START ENGINE

NOTE: Due to prote_ve coatingson the

engine, a small amount of smoke may be

present during the initialusa of the

product and should be considered

normal.

1. To start a cold engine, push primer

three (3) times before trying to start.

Use a firm push. This step is not

usually necessary when starting an

engine which has already run for a

few minutes.

2. Hold operator presence control bar

down to the handle and pull starter

handle quickly. Do not allow starter

rope to snap back.

TO STOP ENGINE

•To stop engine, release operator

presence control bar.

NOTE: In coolerweather it may be

necessary to repeat priming steps. In

warmer weather over priming may cause

floodingand engine will not start. If you

do flood engine, wait a few minutes

before attempting to start and do not

repeat priming steps.

.MOWINGTIPS

• Undercertainconditions,suchasvery

tallgrass,itmaybenecessarytoraise

theheightofcuttoreducepushing

effortandtokeepfrom ovedoading the

engine and leaving clumps of grass

clippings. It may also be necessary to

reduce ground speed and/or run the

lawn mower over the area a second

time.

•For extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly.

• For better grass bagging and most

cutting conditions,the engine speed

should be set in the fast position.

•Pores in cloth grass catchers can

become filled with dirt and dust with use

and catchers will collect less grass. To

prevent this, regularly hose catcher off

with water and let dry before using.

•Keep top of engine around starter clear

and clean of grass clippingsand chaff.

This will help engine air flow and

extend engine life.

MULCHING MOWING TIPS

IMPORTANT: For best performance,

keep mower housing free of built-up

grass and trash. Clean UNDERSIDE OF

MOWER HOUSING after each use. See

•Cleaning" in MAINTENANCE section of

this manual.

•The special mulching blade will recut

the grass clippings many times and

reduce them in size so that as they fall

onto the lawn they will disperse into the

grass and not be noticed. Also, the

mulched grass will biedegrade quickly

to provide nutrients for the lawn.

Always mulch with your highest engine

(blade) speed as this will provide the

best recutting action of the blades.

•Avoid cuttingyour lawn when it iswet.

Wet grass tends to form clumps and

interferes with the mulching action. The

best time to mow your lawn isthe eady

afternoon. At this time the grass has

dded and the newly cut area will not be

exposed to the direct sun.

• For best results,adjust the lawn mower

cuttingheight so that the lawn mower

cutsoff onlythe top one-third of the

grass blades. If the lawn isovergrown it

will be necessary to raise the height of

cut to reduce pushing effort and to keep

from ovedoading the engine and

leaving clumps of mulched grass. For

extremely heavy mulching, reduce your

width ofcut, mow slowly and raise

the rear of the lawn mower one wheel

adjuster setting higher than the front.

•Certain types of grass and grass

conditionsmay require that an area be

mulched a second time to completely

hide the clippings.When doing a

second cut, mow across or perpendicu-

lar tothe firstcut path.

•Change your cutting pattern from week

to week. Mow north to southone week

then change to east to west the next

week. This will help prevent matting

and graining of the lawn.

1/3

MAINTENANCE SCHEDULE

FILL _NDATES

AS YOU COMPLETE _ERVICE DATES

REGULAR SERVICE

CheckforLoose Fasteners "l,/ q m m 1/

;lean/Insp_t Grass Catcher

_Equipped) 1/ 1/ t/

Cleen Lawn Mower I/ I_/

Clean Under Drive Cover

(Powec-Propei_edMowecs) I/

Checkdrivehe ys

(Power.pmpell_eM _ow_)

C_harpen/Replace Blade I/3

LubricationChart 1/ I_

CJeanBatteP//Rechaq

EleCMCStart Mowers t_/1/4

CheckEngineOn Level I/

Change Engine Oil 1/1.2

Clean Air Filter I_ 2

Inspect Muffler 1/

Clean or ReplaceSpark plug b/

ReplaceAirFilter Paper Cartridge 1/z

1 - ChllrOD r_orl) o_n _d1_1 _ Ulld_ i h_lVy IGqd _- tl_ h_h _b'_eqiluI#.

2-Set_t_ more offlm v.tlen 0_enl_ _n didy or dusly oondt_m_.

3 - R_a¢8 _adel mo_ _,*_ when _in sandy aOll.

4 - Charge48 Ix_Jmat endof m. LUBRICATION CHART

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does

not cover items that have been subjected

to operator abuse or negligence. To

receive full value from the warranty,

operator must maintain mower as

instructedin this manual.

Some adjustments will need to be made

periodicallyto propedy maintain your

unit.

All adjustments in the Service and

Adjustmentssection of this manual

should be checked at least once each

season.

• Once a year, replace the spark plug,

clean or replace air filter element and

check blade for wear. A new spark

plug and cleaNnew air filter element

assures proper air-fuel mixture and

helps your engine run better and last

longer.

•Fonowthe maintenance schedule in

this manual.

BEFORE EACH USE

I. Check engine oil level.

2. Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See "LUBRI-

CATION CHART").

_Nheel adjusters

•) Brake Spring

Bracket

(_) Engine oil

•) Reardoorhinge (_Handlebracket

mountingpin

_)Refer to maintenance "Engine" section,

{_Spray lubricant

IMPORTANT: Do not oil or grease

plastic wheel bearings, viscous lubri-

cants will attractdust and dirt that will

shorten the life ofthe self-lubricating

beadngs, ifyou feel they must be

lubricated, usa only a dry,powdered

graphite type lubricantsparingly.

Table des matières

Langues :

Autres manuels Craftsman Tondeuse à gazon

Craftsman

Craftsman 944.364290 Manuel utilisateur

Craftsman

Craftsman 917.28856 Manuel utilisateur

Craftsman

Craftsman 37436 - Rear Propelled Bag Lawn Mower Manuel utilisateur

Craftsman

Craftsman 917.2736404 Manuel utilisateur

Craftsman

Craftsman 917.270751 Manuel utilisateur

Craftsman

Craftsman 917.28001 Manuel utilisateur

Craftsman

Craftsman 917.378900 Manuel utilisateur

Craftsman

Craftsman 917.389070 Manuel utilisateur

Craftsman

Craftsman 25906 Manuel utilisateur

Craftsman

Craftsman 917.271645 Manuel utilisateur

Craftsman

Craftsman 917.372851 Manuel utilisateur

Craftsman

Craftsman EZ3 917.273021 Manuel utilisateur

Craftsman

Craftsman 28928 - YT 4000 24hp 46" Yard Tractor Manuel utilisateur

Craftsman

Craftsman 917.271630 Manuel utilisateur

Craftsman

Craftsman 247.887760 Manuel utilisateur

Craftsman

Craftsman 917.388103 Manuel utilisateur

Craftsman

Craftsman 917.28874 Manuel utilisateur

Craftsman

Craftsman 917.377911 Manuel utilisateur

Craftsman

Craftsman 944.601881 Manuel utilisateur

Craftsman

Craftsman 917.28713 Manuel utilisateur

Craftsman

Craftsman 917.273140 Manuel utilisateur

Craftsman

Craftsman 247.288812 Manuel utilisateur

Craftsman

Craftsman 917.376521 Manuel utilisateur

Craftsman

Craftsman 917.370892 Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur

Stihl

Stihl RMA 443 PV Manuel utilisateur