Craftsman 917.377422 Manuel utilisateur

Owner's Manual

[RAFTSNRNo

6.5 HORSEPOWER

22" EZ MULCH

POWER PROPELLED

ROTARY LAWN MOWER

Model No.

917,377422

• Safety

• Assembly

• Operation

•Maintenance

• Espa5ol

• Repair Parts

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Warranty 2Product Specifications 10

Safety Rules 2Service and Adjustments 13

Assembly 4 Storage 14

Operation 5 Troubleshooting 15

Maintenance Schedule 9 Repair Parts 33

Maintenance 9 Parts Ordering Back Cover

LIMITED "I'WO YEAR WARRANTY ON CRAFTSMAN POWER-MOWER

For two years from date Of pumhase, when this Craftsman Lawn Mower is maintained,

lubricated, and tuned up;according to the operating and maintenance instructions in the

owner's manua!, Sears will repair free of charge any defect in material or workmanship.

If this Craftsman Lawn Mower is used for commercial or rental purposes, this warranty

applies for only 90 days from the date of purchase.

This Warranty does not cover:

•Expendable items which become worn during normal use, such as rotary mower

blades, blade adapters, belts, air cleaners and spark plug.

•Repairs necessary because of operator abuse or negligence, including bent crank-

shafts and the failure =tomaintain the equipment according to the instructions con-

tained in the Owner's manual.

Warranty service is ave!table by returning the Craftsman power mower to the nearest

Sears Service Center/De_artment in the United States. This warranty applies only while

this product is in use in the United States.

This Warranty gives you specific:legal rights, and you may also have other rights which

vary from state to state.

SEARS, ROEBUCKANDCO., D/817 WA, HOFFMAN ESTATES, ILLINOIS 60179

Safety standards require operator pres-

ence controls to minimize the risk of injury.

Your unit is equipped with such controls.

Do not attempt to defeat the function of the

operator presence controls under any

circumstances.

TRAINING:

•Read this operator's manual carefully.

Become familiar with the controls and

know how to operate your mower

property. Learn how to quickly stop

mower.

•Do not allow children to use.your mower.

Never allow adults to use mower without

proper instructions.

•Keep the area of operation clear of all

persons, especially small children and

pets.

•Use mower only as the manufacturer

intended and as described in this manual.

•Do not operate mower if it has been

dropped or damaged in any manner.

Always have damage repaired before

using your mower.

•Do not use accessory attachments that

are not recommended by the manufac-

turer. Use of such attachments may be

hazardous.

•The blade tums when the engine is

running.

PREPARATION:

•Always thoroughly check the area to be

mowed and clear it of all stones, sticks,

wires, bones, and other foreign objects.

These objects willbe thrown by the blade

and can cause severe injury.

•Always wear safety glasses or eye

shields when starting and while using

your mower.

• Dress properly. Do not operate mower

when barefoot or wearing open sandals.

Wear only solid shoes with good traction

when mowing.

•Check fuel tank before starting engine.

Do not fill gas tank indoors, when the

engine is running or when the engine is

hot. Allow the engine to coot for several

minutes before filling the gas tank. Clean

off any spilled gasoline before starting the

engine.

•Always make wheel height adjustments

before starting your mower. Never

attempt to do this while the engine is

running.

•Mow only in daylight or good artificial

light.

OPERATION:

• Keep your eyes and mind on your mower

and the area being cut. Do not let other

interests distract you.

•Do not mow wet or slippery grass. Never

run while operating your mower. Always

be sure of your footing -- keep a firm

hold on the handles and walk.

• Do not put hands or feet near or under

rotating parts. Keep clear of the discharge

opening at all times.

• Always stop the engine whenever you

leave or are not using your mower, or

before crossing driveways, walks, roads,

and any gravel--covered areas.

•Never direct discharge of material toward

bystanders nor allow anyone near the

mower while you are operating it.

•Before cleaning, inspecting, or repairing

your mower, stop the engine and make

absolutely sure the blade and all moving

parts have stopped. Then disconnect the

spark plug wire and keep it away from the

spark plug to prevent accidental starting.

•Do not continue to run your mower if you

hit a foreign object. Follow the procedure

outlined above, then repair any damage

before restarting and operating you

mower.

•Do not change the governor settings or

overspeed the engine. Engine damage or

personal injury may result.

•Do not operate your mower if it vibrates

abnormally. Excessive vibration is an

indication of damage; stop the engine,

safely check for the cause of vibration

and repair as required.

•Do not run the engine indoors. Exhaust

fumes are dangerous.

• Never cut grass by pulling the mower

towards you. Mow across the face of

slopes, never up and down or you might

lose your footing. Do not mow exces-

sively steep slopes. Use caution when

operating the mower on uneven terrain

or when changing directions -- maintain

good footing.

• Never operate your mower without

proper guards, plates, grass catcher or

other safety devices in place.

MAINTENANCE/_,-ND STORAGE:

• Check the blade and the engine mouet-

ing bolts often to be sure they are

tightened propedy.

• Check all bolts, nuts and screws at

frequent intervals for proper tightness to

be sure mower is in safe working

condition.

• Keep all safety devices in place and

working.

• To reduce fire hazard, keep the engine

free of grass, leaves or excessive grease

and oil,

•Check grass catcher often for deteriora-

tion and wear and replace worn bags.

Use only replacement bags that are

recommended by and comply with

specifications of the manufacturer of your

mower.

•Always keep a sharp blade on your

mower.

•Allow engine to cool before storing in any

enclosure.

•Never store mower with fuel in the tank

inside a building where fumes may reach

an open flame or an ignition source such

as a hot water heater, space heater,

clothes dryer, etc.

ACAUTION: Always disconnect spark

plug wire and place wire where it cannot

contact spark plug in order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs.

WARNING

The engine exhaust from this product

contains chemicals known to the State of

California to cause cancer, birth detects,

or other reproductive harm.

These accessories were available when this lawn mower was produced. They are also

available at most Sears retail outlets and service centers. Most Sears stores can also

order repair parts for you, when you provide the model number of your lawn mower.

Some of these accessories may not apply to your lawn mower.

LAWN MOWER PERFORMANCE

CUPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWERS MULCHER KITS ._

GRASS CATCHERS

FOR

REAR DISCHARGE

LAWN MOWERS GRASS CATCHERS

FOR

SIDE DISCHARGE

LAWN MOWERS

STABlUZER

GAS CANS

LAWN MOWER MAINTENANCE

MUFFLERS

BELTS BLADES

AIR RLTERS

BLADE ADAPTERS WHEELS

SPARK PLUGS

ENGINE OIL

Read these instructions and this manual in

its entirety before you attempt to assemble

or operate your new lawn mower. Your

new lawn mower has been assembled at

the factory with the exception of those

parts left unassembled for shipping

purposes. All parts such as nuts, washers,

bolts, etc., necessary to complete the

assembly have been placed in the parts

bag. To ensure safe and proper operation MOWER

of your lawn mower, all parts and hardware TO UNFOLD HANDLE

you assemble must be tightened securely.

Use the correct tools as necessary to

ensure proper tightness.

TO REMOVE LAWN MOWER FROM

CARTON

•Remove loose parts included with

mower.

•Cut down two end corners of carton and

lay end panel down flat.

•Remove all packing materials except

padding between upper and lower

handle and padding holding operator

presence control bar to upper handle,

• Roll lawn mower out of carton and check

carton thoroughly for additional loose

parts.

HOW TO SET UP YOUR LAWN

IMPORTANT: Unfold handle carefully so

as not to pinch or damage control cables.

•Raise handles until lower handle section

locks into place in mowing position.

•Remove protective padding, raise upper

handle section into place on lower

handle and tighten both handle knobs.

•Remove handle padding holding

operator presence control bar to upper

handle.

•Your lawn mower handle can be

adjusted for your mowing comfort.

Refer to "Adjust Handle" in the Service

and Adjustment section of this manual.

Operator presencecontrolbar

Upper handle _'_[ lJ___W

Liftup ,_.._:_. _ ,ing

_.._ "_position

____ _ Lower

handle

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN

MOWER. Compare the illustrationswithyour lawn mower tofamiliarize yourselfwith the

locationofvarious controlsand adjustments. Save thismanual for future reference.

These symbols may appear on your lawn mower or in literature supplied with the

product. Learn and understand their meaning.

CAUTION Be31NE ENGINE FAST ELOW CHOKE FUEL C{L DANGER, KEEP HANOS

OR WARNING ON OFF AND FEET AWAY

Operatorp Drive control lever

Enginezonecontrolcable

Starter handle control

Handle knob --

Engineoilcapwith dipstick

Mulcher door

Gasolinefiller cap

Primer

Drivecover

adjuster

(on each wheel)

MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conform to the safety standards of the

American National Standards Institute and the U.S. Consumer Product Safety Commis-

sion. The blade turns when the engine is running.

Operator presence control bar- mustbe

helddown tothe handle tostartthe engine,

Release to stop the engine.

Primer - pumps add'_onalfuel from the

carburetorto the cylinderfor use when starting

a coldengine,

Starter handle - used for startingthe engine.

Drive control lever - used to engage power-

propelledforward motion oflawn mower,

Mulcher-allows conversion to dischargeor

bagging operation.

Theoperationofanylawnmowercanresultin

foreign objectsthrown intothe eyes, whichcan

resultin ,severeeye damage. Always wear

safety glasses or eye shieldswhile operating

your lawn mower or performingany adjust-

merits or repairs. We recommend a wide

visionsafety mask over spectacles orstandard

safetyglasses,

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED CONTROL

The engine speed was set at the factory

for optimum performance. Speed is not

adjustable,

ENGINE ZONE CONTROL

ACAUTION: Federal regulationsrequirean

engine controlto be installedon this lawn

mower in order to minimize the riskofblade

contact injury.Do not underany circumstances

attempt to defeat the function ofthe operator

control. The blade turnswhen the engine is

running.

•Your lawn mower isequ_oed with an

operatorpresence controlbarwhich

requiresthe operatortobe positioned

behind the lawn mower handle to startand

operate the lewn mower.

DRIVE CONTROL

•Self-prepellingiscontrolled by holdingthe

operator presence controlbar downtothe

handle and pushingthe drivecontrol lever

fon_ud untilitdicks; then relaase the lever.

•Forwardmotionwillstopwhen theoperator

presence controlbar isreleased. To stop

forward motionwithoutstoppingengine,

release the operator presence control bar

slightlyuntilthe drivecontrol ¢ilsengages.

Hold operatorpresence controlbar downto

handle tocontinue mowing withoutself-

propelling.

•To keep drivecontrolengaged when turning

comers, push down on handle and liftfront

wheels offgroundwhileturninglawn

mower.

Operator presencecontrol Drive

bar control

\_, \_ Drivecontrol

To engagedrivecontrol disengaged

TO ADJUST CUTrlNG HEIGHT

• Raise wheels for low cutand lower wheals

for high cut.

•Adjustcuttingheightto suityour require-

ments. Medium positionisbest for most

lawns.

•To change cuttingheight,squeeze adjuster

lever towardwheel. Move wheel up or

down to suityour requirements. Be sure all

wheels are in the same setting.

NOTE: Adjuster isproperlypositioned when

plate tab insertsintohole in lever. Also, 9-

po.s_onadjusters ('tiso equipped) allowlever

to be positioned between the plate tabs.

Lowerwheels for

high cut Platetab

_ver

Raise wheelsfor low

cut

NOTE: Your lawn mower has been

shipped ready for mulching operation. To

convert to discharging operation, you must

install the discharge deflector attachment

included with your mower.

TO INSTALL DISCHARGING

DEFLECTOR

•Lift door upward on it's hinge until the

deflector frame can be hooked over the

door mounting bracket as shown.

•Release the door to rest against

deflector frame.

•To return to mulching operation, revers_

the above steps and be sure door is in

closed position.

_., _'_r_.. _--- Mulcher Doo_

Deflector __ Mounting

Bracket

ACAUTION: Do not operate your lawn

mower without mulcher door in closed

position, discharge deflector in place, or

approved grass catcher in place.

BEFORESTARTINGENGINEOIL

Yourlawnmower isshippedwithoutoilinthe

engine.

• Be sure mower islevel and area aroundoil

fillisclean.

•Remove engine oilcap and filltothe fullline

on thedipstick.

• Use2Oozs.of oil.Fortypeand gmde ofoil Engineoilcap

to use, see "ENGINE-"in Maintenance

sectionofthismanual.

•Pour oilslowly. Do net over fill

•Check oillevel beforeeach use. Add oilif

needed. Filltofull lineon dipetiok.

•To read properlevel,tightenengine oilcap

each time,

• Reinstall engine oil cap and tighten.

• Change the oil afterevery 25 hours of

operation or each season. You may need

to change the oilmore often under dusty,

dirty conditions.

GAS

•Fill fuel tank. Use fresh, clean, regular

unleaded gasoline with a minimum of 87

octane, Do not mix oil with gasoline.

Purchase fuel in quantities that can be •

used within 30 days to assure fuel

freshness.

WARNING: Experience indicates that alcohol •

blended fuels (called gasoholor usingethanol

or methanol) can attractmoisturewhichleads

to separation and formationof acids during •

storage. Acidic gas can damage thefuel

system of an engine while in storage. To avoid

engine problems, the fuel system should be

emptied before storage of 30 days or longer.

Drain the fuel tank, start the engine and let it

rununtil fuel lines and carburetor are empty.

Use fresh fuel next season. See Storage

Instructions for additional information. Never •

use engine or carburetor cleaner products in

fuel tank or permanent damage may occur.

TO START ENGINE

•To start a cold engine, push primer five

(5) times before trying to start. Use a

firm push. This step is not usually

necessary when starting an engine

which has already run for afew minutes.

•Hold operator presence control bar

down to the handle and pull starter

handle quickly. Do not allow starter

rope to snap back.

•To stop engine, release operator

presence control bar.

NOTE: In cooler weather it may be

necessary to repeat priming steps_ In

warmer weather over priming may cause

flooding and engine will not start. If you do

flood engine, wait a few minutes before

attempting to start and do not repeat

priming steps. ------- Gasolinefiller

cap

MOWING TIPS

Under certain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing effort

and to keep from overloading the engine

and leaving clumps of grass clippings. It

may also be necessary to reduce

ground speed and/or run the lawn

mower over the area asecond time.

For extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly.

For better grass bagging and most

cutting conditions, the engine speed

should be set in the fast position.

For side discharge lawn mowers, cutting

in a counter-clockwise direction, starting

at the outside of the area to be cut,

spreads grass clippings more evenly

and puts less load on the engine. To

keep clippings off of walkways, flower

beds, etc., make the first cuts in a

clockwise direction.

Pores in cloth grass catchers can

become filled with dirt and dust with use

and catchers will collect less grass. To

prevent this, regularly hose catcher off

with water and let dry before using.

Keep top of engine around starter clear

and clean of grass clippings and chaff.

This will help engine air flow and extend

engine life.

MULCHING MOWING TIPS

IMPORTANT: For bestpeffo_, keep

mower housingfree ofbuilt-upgrass and

trash. See "Cleaning"in MAINTENANCE

sectionof thismanual.

•The specialmulchingblade willrecurthe

grass clippingsmany timesand reduce

them in size sothat as they fallontothe

lawn they willGr_speraeinto thegrass and

not be noticed. Also, the mulched grass will

biodegrade quickly to provide nutrients for

the lawn. Always mulch withyour highest

engine (blade) speed as INs will providethe

best recurringactionof the blades.

•Avoid cuttingyour lawn when itiswet. Wet

grass tends to form dumps and interferes

withthe mulching action. The best time to

mowyour lawn is theearly afternoon. At

this timethe grass has dried and the newly

cutarea will not be exposedto the direct

sun.

•For best results,adjustthe lawn mower

cuttingheight so that the lawn mower cuts

offonlythe top one-thirdofthe grass blades

Ifthe lawn is overgrown itwill be necessary

to raise the height ofcutto reduce pushing

effortand to keep from overloadingthe

engine and leaving clumps ofmulched

grass. For extremely heavy mulching,

reduce your width of cut by overlapping

previously cut path and mow slowly.

• Certain types of grass and grass cond'_ons

may requirethat an area be mulched a

second time to qompletely hidethe

dippings. When-doing a second cut, mow

across or perpendicular tothe first ct_tpath.

•Change yourcuttingpatternfrom Weekto

week. Mow northto southone week then

change to east towest the nextweek. This

will helpprevent matting and grainingofthe

lawn.

Check forLoose Fasteners _ ll/

Clean/Inspect Grass Catcher

MCleanLawn Mower

O Clean Under Drive Cover

(Power-Propelled MowersI _/'

Check drivebelt/pulk_ys

RE (Power-PropelledMowe rs) I/

CheckiSharpan/Replece Blade I_$ _--

LubdcatlenChart _It#*

Clean Battery/Rechar_le

ElectricStart Mowers/ I1,#' t#/4

E CheckEngine O{I Level '

NChangeEngine Oil f1_1,2

G Clean Air Filler It#' 2

J InspectMuffler I/'

NClean or Replace Spark Plug v'

E ReplaceAirFilterPaperCartridge I/=

1- Change more oftm v,turnoperating uod_ a heaW load or Inhigh ambient temperate="

2 - S4rvlcsrnomoft_ ',,Awmopemt_g M_rty ordu_y ¢o_41tkw_.

S-R_ bbdes moreo_tm_Wwmmowinginsandy$o4t

4-Charge48 hourzatmd ofu.

GENERAL RECOMMENDATIONS

The warrantyon this lawn mower does not

cover itemsthat have been subjected to

operatorabuse or negligence. To receive full

value fromthe warranty, operator must

maintain mower as instructedin thismanual.

Some adjustmentswillneed to be made

periodically to properlymaintain your unit.

Alladjustments inthe Service and Adjust-

mentssectionofthis manual shouldbe

checked at leastonce each season.

•Once a year, replacethe spark plug,clean

or replace air filterelement and check blade

for wear. A new spark plug and clean/new

air filter element assures proper air-fuel

mixtureand helps yourengine runbetter

andlastlonger.

• Followthe maintenance schedule inthis

manual.

BEFORE EACH USE

•Check engine oillevel.

•Check for loosefasteners.

LUBRICATION

Keep unitwell lubricated(See "LUBRICATION

CHART").

LUBRICATION CHART

(_) Wheel (_ Mulcher door

adjuster

(_) Eng_e

oil (_ Brakespring

(_) bracket

Handle bracket

mountingpin

(_ Spray lubricante

(_) Referte MAINTINANCE "ENGINE"

SECTION.

IMPORTANT: Do not oilor grease plastic

wheel bearings. Viscous lubricantswillattract

dust and dirt thatwillshorten the lifeofthe serf

lubricatingbearings. Ifyou feel they mustbe

lubricated, use only a dry,powdered graphite

type lubricantsparingly.

PRODUCT SPECIFICATIONS

MODEL NUMBER 917.377422

;ERIAL NUMBER

DATE OF PURCHASE

HORSEPOWER: 6.5

DISPLACEMENT: 11.5 CU. IN.

GASOLINE CAPACITY/TYPE: 1.25 QUARTS

UNLEADED REGULAR

OIL TYPE (API-SF/SG/SH): SAE 30 (A_BOVE 32°F)

SAE 5W-30 (BELOW 32°F)

OIL CAPACITY: 20 OZS.

SPARK PLUG(GAP: .030") CHAMPION RJ19LM OR J19LM

VALVECLEARANCE: INTAKE: .004 - .008

EXHAUST: .004 - .008

SOLID STATE IGNITION

AIR GAP: .0125 IN.

BLADE BOLT TORQUE: 35-40 FT. LBS.

•The model and serial numbers will be found on a decal attached to the rear of the

lawn mower housing.Record both serial number and date of purchase in space

provided above.

LAWN MOWER

Always observesafety ruleswhen performing

any maintenance.

TIRES

•Keep tiresfree of gasoline, oil,or insect

controlchemicalswhich can harm rubber.

•Avoid stumps,stones,deep ruts,sharp

objectsand other hazards thatmay cause

tiredamage.

BLADE CARE

For best results, mower blade must be

kept sharp. Replace bent or damaged

blades.

TO REMOVE BLADE

•Disconnect spark plug wire from spark

plug and place wire where itcannot

come in contact with spark plug.

•Turn lawn mower on its side. Make sure

air filter and carburetor are up.

•Use a wood block between blade and

mower housing to prevent blade from

turning when removing blade bolt.

•Protect your hands with gloves and/or

wrap blade with heavy cloth.

•Remove blade bolt by turning counter-

clockwise.

•Remove blade and attaching hardware

(bolt, lock washer and hardened

washer).

NOTE: Remove the blade adapter and

check the key inside hub of blade adapter.

The key must be in good condition to work

property. Replace adapter if damaged.

TO REPLACE BLADE

•Position the blade adapter on the engine

crankshaft. Be sure key in adapter and

crankshaft keyway are aligned.

• Position blade on the blade adapter

aligning the two (2) holes in the blade

with the raised lugs on the adapter.

•Be sure the trailing edge of blade

(opposite sharp edge) is up toward the

engine.

•Install the blade bolt with the lock

washer and hardened washer into blade

adapter and crankshaft.

•Use block of wood between blade and

lawn mower housing and tighten the

blade bolt, turning clockwise.

•The recommended tightening torque is

35-40 ft. Ibs.

Autres manuels pour 917.377422

Table des matières

Autres manuels Craftsman Tondeuse à gazon

Craftsman

Craftsman 917.377780 Manuel utilisateur

Craftsman

Craftsman 917.378910 Manuel utilisateur

Craftsman

Craftsman 37147 Manuel utilisateur

Craftsman

Craftsman 25907 Manuel utilisateur

Craftsman

Craftsman 917.376655 Manuel utilisateur

Craftsman

Craftsman 247.370160 Manuel utilisateur

Craftsman

Craftsman 917.376593 Manuel utilisateur

Craftsman

Craftsman 917.388751 Manuel utilisateur

Craftsman

Craftsman 917.376222 Manuel utilisateur

Craftsman

Craftsman 917.374042 Manuel utilisateur

Craftsman

Craftsman 917.377011 Manuel utilisateur

Craftsman

Craftsman 917.255744 Manuel utilisateur

Craftsman

Craftsman T1200 247.203770 Manuel utilisateur

Craftsman

Craftsman 917.375502 Manuel utilisateur

Craftsman

Craftsman 917.273600 Manuel utilisateur

Craftsman

Craftsman 28790 - 26 HP 50 in. Zero Turn Tractor Mower Manuel utilisateur

Craftsman

Craftsman 917.370660 Manuel utilisateur

Craftsman

Craftsman 917.257651 Manuel utilisateur

Craftsman

Craftsman 917.28807 Manuel utilisateur

Craftsman

Craftsman 917.370910 Manuel utilisateur

Craftsman

Craftsman 944.364341 Manuel utilisateur

Craftsman

Craftsman 917.379400 Manuel utilisateur

Craftsman

Craftsman 917.275240 Manuel utilisateur

Craftsman

Craftsman 944.363530 Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur

Stihl

Stihl RMA 443 PV Manuel utilisateur