Craft Dragon CD-ES 080902 Manuel utilisateur
ImPress
User Manual
Model No: CD-ES 080902
Please read these instructions carefully and keep them for future reference
The manual
Users manual for CraftDragon® Impress and Flexi-bloc™
English version 1.0, January 2011
Copyright © Craft Dragon Ltd., 2011
All rights reserved. No part of this manual may be reproduced except for your express personal use. Craft dragon reserves the right to revise
this publication without obligation to provide notification of such changes.
Craft Dragon does its best to provide current and accurate information within this manual. However, Craft Dragon reserves the right to change
any specifications and product configurations without prior notice and without any obligation to include such changes in this manual.
Reuse, recycling and recovery. You are urged to recycle this product when replacing it with a newer product, or when it has outlived its use-
ful life by bringing it to an appropriate collection point for recyclable materials in your community or region. By doing this you can help improve
the environment of your community as well as minimize the potential negative effects created should any hazardous substance that may possi-
bly be present within waste material reach the environment during the disposal process.
Flexi-bloc is a trademark and CraftDragon is a registered trademark of Craft Dragon Ltd.
Any additional product or company names mentioned in this documentation may be trademarked and/or registered as trademarks. Mention of
any third-party products is for information only and does not constitute either an endorsement nor a recommendation.
Contents
Unpacking your CraftDragon® ImPress...................................2
Safety Instructions....................................................................3
An introduction to the CraftDragon® ImPress..........................5
Feature Diagram......................................................................6
Setting up your ImPress...........................................................7
Using your CraftDragon® ImPress
Thermostat, power switches, Cleaning and Storage..........8
Hot Foil Stamping...............................................................9
Precision Ink Stamping.......................................................11
Embellishing and Hot Press Printing..................................12
DO’S AND DON’TS............................................................13
Connection to the Mains Supply..............................................14
Unpacking your CraftDragon® ImPress
Thank you for purchasing the CraftDragon® ImPress Hot foiling machine. Each unit has been manufactured to ensure safety and reliability
every ImPress has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the packaging for damage
that may have occurred during transport. If the packaging appears to be damaged, carefully inspect your ImPress for any damage and be sure
all accessories necessary to operate the unit have arrived intact.
• It is recommended that you use Craft Dragon products with your machine, in order to achieve the best results.
•If the unit or accessories have been damaged, you may either return the damaged part to the retailer from which you purchased it or contact
our customer support number (0845 398 7770) for further instructions.
Before first use, please read the instructions carefully, and keep them for future reference.
UNPACKING YOUR CRAFTDRAGON® IMPRESS
1. Carefully Remove the CraftDragon® ImPress Hot foiling machine and positioning unit and all the accessories from the carton and remove
all packaging materials.
2. Make sure that all packaging is disposed of correctly.
3. Check that all of the accessories listed on the contents list below are present.
4. Check the CraftDragon® ImPress after unpacking for any visual damage such as:
ŸMisaligned or damaged parts
ŸDamage to the plug or cable
5. If you can see any damage do not use the ImPress.
6. Read all safety Instructions before use.
7. Your ImPress system consists of:
• Imp and Press Unit
• Make ready mat
• 1 Die
• 1 roll of foil
Please note:
In manufacture it is necessary to lightly grease some parts of the appliance. This may result in the unit emitting some vapour when
first used, this is normal.
© CraftDragon®2
Safety Instructions
IMPORTANT SAFEGUARDS
1. Place the assembled unit on a suitable firm, flat and substantial work surface, at a height that is comfortable for easy operation.
2. Always locate the unit away from the edge of a work surface.
3. Always disconnect the CraftDragon® ImPress from the main supply when not in use and when cleaning.
4. Do not lock down the ImPress whilst the heated Imp unit is still hot.
5. Do not leave the CraftDragon® ImPress on unattended.
6. Never cover the CraftDragon® ImPress when switched on or hot as this may lead to a risk of fire.
7. Make sure that when using the CraftDragon® ImPress for hot foiling the unit is away from flammable or perishable materials.
8. Position the mains lead so that it does not get in your way when using the CraftDragon® ImPress and make sure that the power cable cannot
be damaged by the heated area of the CraftDragon® ImPress.
9. Before use, always place the ImPress unit on a solid, stable surface to avoid tipping or dropping it.
10. Do not touch hot areas of the CraftDragon® ImPress with bare hands when switched on.
11. Use a heat resistant glove or pad when removing dies etc.
12. Keep heated surface away from all personal body parts, animals or children.
13. The CraftDragon® ImPress will become very hot during use.
14. Close supervision is required when the CraftDragon® ImPress is used near or by children.
15. Never allow the cord to touch wet or hot surfaces, become twisted or be within the reach of children or animals.
16. Do not place on or near a hot gas or electric burner.
17. Do not use out of doors, unless under safe conditions.
18. Never use the CraftDragon® ImPress with a damaged cord or plug or after the CraftDragon® ImPress has malfunctioned or been damaged
in any other way.
19. Never attempt to open any part or dismantle the controls of the CraftDragon® ImPress. Responsibility for failure cannot be accepted if these
instructions have been ignored.
20. Do not use the CraftDragon® ImPress for anything other than the intended uses.
21. Only use the heated Imp unit when fixed in the press.
22. Do not remove the locking handles from the press unit.
23. Only use heated unit on recommended materials.
24. This appliance is intended for household, supervised educational or office use only.
25. Do not use the CraftDragon® ImPress in the immediate surroundings of a bath, a shower or a swimming pool.
© CraftDragon®3
Safety Instructions
Warning: Any repairs that need to be done to the CraftDragon® ImPress must be referred to an authorised service agent only.
Warning: Never use the CraftDragon® ImPress if the supply cord is damaged. If the supply cord is damaged, it must be replaced by the
Manufacturer or its service agent in order to avoid a hazard.
Warning: The CraftDragon® ImPress is not intended for use by young children or infirmed persons without supervision.
Warning: The CraftDragon® ImPress is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the CraftDragon® ImPress by a
person responsible for their safety.
Your safety
· WARNING: Do not touch hot surfaces. Use oven mitts, oven gloves or a heat resistant mat when removing a hot die or tri-plate
· WARNING: Avoid contact with moving parts.
· To protect against electrical shock, do not immerse cord or plug in water or other liquid.
· Extreme caution must be observed when moving an appliance with hot contents.
· Do not use the appliance with wet or moist hands.
· Always remove the plug from the socket whenever the machine is not in use, or whenever a disturbance occurs. Pull on the plug, not
the cable.
PRODUCT SPECIFICATION
Voltage: 220V -240V - 50 Hz
Power: 250W
© CraftDragon®4
© CraftDragon®5
What is the CraftDragon® ImPress?
The ImPress from CraftDragon® is a revolutionary, new, ultra-stylish and versatile machine developed to make hot foil stamping easy for
anyone to do. With an easy fix block system and interchangeable accessories it is fun and simple to use. You be able to glide through the
ImPress’ many precision functions and produce stunningly professional finishes which are sure to astound. Not only will the results please
but the ImPress looks are bound to ‘Impress’. Available in 4 different colour ways (subject to availability) the ImPress oozes style from its
design and beautifully sculpted curves to its unique flexible click in system. It is stylish enough to sit in any home, office or workspace and
small and light enough to take with you so that you and your ImPress are always at the ready.
Amongst the ImPress’ many innovative features are:
ŸSpecifically configured print head for easy fix dies so that you are set up in seconds. (1)
ŸSimple to read and use temperature control panel, with power switch ,temperature control knob and pilot light. (2)
ŸSpecially designed removable guide mat to position and hold your work in place. (3)
ŸLarge printing deck to support large projects. (4)
ŸRemovable printing head (Imp) to give flexibility in printing and other techniques. (5)
ŸEasy to use press to give firm and even pressure without the need for excessive adjustment. (6)
ŸRemovable flat bed (or platen) to allow easy adjustment and insertion of alternative accessories. (7)
ŸLocking Handles for ease of removal of Imp and other accessories. (8)
ŸSoft grip handle. (9)
ŸRetaining clips to ensure that the dies do not fall out of the tracks (11)
ŸExtra wide throat for safety and for extra thick substrates. (10)
What can the ImPress be used for?
The CraftDragon® ImPress is designed to be used primarily for Hot foil Stamping, although with its many add-ons and accessories it can
also be used for:
·Precision Ink Stamping using the unique Flexi-bloc™ accessory.
·Adding embellishments, such as hot-fix crystals and studs to papercraft and fabric projects.
· Hot Press printing and other sublimation techniques.
· Hot melt techniques (using friendly plastic etc).
AN INTRODUCTION TO THE CRAFTDRAGON® IMPRESS
Feature Diagram
1. Print head
2. Control panel
3. Positioning mat
4. Print Deck
5. Imp
6. Press
7. Flat bed (or platen)
8. Locking Handles
9. Sure grip handle
10.Throat
11.Retaining clips
2
3
1
5
4
6
7
8
9
10
© CraftDragon®6
Control panel detail
Pilot light
Control Dial
Power switch
11
You will have to experiment with temperature and dwell times, depending on the substrate, foil and room temperature but once you get the hang of it
you will find your ImPress simple and fun to use. Just to make sure you and your ImPress get off on the right footing, follow these simple rules for setting
up to get the best out of your unit right from the start.
ŸMake sure the CraftDragon® ImPress is sitting firm and level on a solid surface such as a kitchen worktop, solid desk, table or workbench, as
any give in the supporting surface will affect the resulting print.
ŸMake sure that the working height is comfortable, but at the right height to allow you to apply pressure to the press.
ŸKeep the room you are working in at a steady temperature if possible.
ŸFor hot foil stamping, stick the make-ready mat in position on the platen using the following method:
1. Remove the backing sheet from the make ready
2. Trim 2cm off 2 adjacent edges of the backing sheet
3. Reapply the backing sheet to the centre of the adhesive layer of the Make-ready mat.
4. Place the Make-ready mat blue face up and press down the edges to enhance adhesion
ŸBefore switching on, insert your chosen die in the centre channel.
ŸSwivel the retaining clip on the end of the channel into a down position to retain the die in place.
ŸTurn the temperature dial up to the required setting and allow the print head to warm through thoroughly for at least 10 minutes (the longer the
better)
ŸTest the printing temperature of your foils (normally between 4 and 5 on the dial , depending on the foil and the substrate you are using) before
proceeding to your actual project.
ŸYou’re ready to go - have fun!
For further hints and tips go to: www.craftdragon.com
Setting up your CraftDragon® ImPress
1 2 3 4
© CraftDragon®7
Using your CraftDragon® ImPress
USING THE THERMOSTAT AND POWER SWITCHES
1. The thermostat on the CraftDragon® ImPress can be adjusted to temperature conditions. Cold or hot conditions can affect the working
temperature of the CraftDragon® ImPress. It is advisable to keep the work room at a constant temperature.
2. The power light comes on with a steady glow when the CraftDragon® ImPress is activated.
3. To operate the thermostat, turn dial clockwise to increase the heat output.
4. To decrease the heat, turn the dial anti-clockwise.
5. Once you have finished using the CraftDragon® ImPress always turn the power off and re-set the thermostat to the zero position.
6. Remove any dies with heat resistant glove or pad or when cool.
7. Remember to unplug the CraftDragon® ImPress unit from the mains supply.
SETTING THE TEMPERATURE
CLEANING
1. To clean the CraftDragon® ImPress always disconnect from the mains supply.
2. When the CraftDragon® ImPress is cold, clean the base plate with a damp cloth and buff with a dry cloth.
3. To clean the main body of the CraftDragon® ImPress, follow these instructions.
ŸAllow the CraftDragon® ImPress to cool before cleaning.
ŸClean outer surface using a moist cloth and then wipe over with a dry soft cloth.
ŸDo not use harsh detergents, abrasives or spray on cleaners.
ŸDo not allow water to seep into the openings or come into contact with electrical connections.
STORAGE
1. If possible store in a crafting case or the box it came in.
2. Before storing the CraftDragon® ImPress ensure that it is completely cold.
3. To store both elements together, place a shim between the Imp and the press base to protect both surfaces before locking down.
© CraftDragon®8
Dial settings Temperature Discipline
1-2 Low Hot Melt work
3-4 Medium
Sparkle craft
Hot foil stamping
5-6 High
Hot foil stamping
Hot press printing
Table des matières
